矩形微通道内液滴产生和运动特性实验研究

摘要/Abstract

摘要：

摘要：借助于高速电荷耦合器件(CCD)相机，对宽125 μm、深300 μm的聚二甲基硅氧烷（PDMS）微通道内的液滴产生和流动进行了可视化实验研究，通过改变水（离散相）和硅油（连续相）的流量比，分析了液滴的长度、运动速率和产生频率的变化情况.结果表明：微通道内液滴的无量纲长度与水、油流量比之间存在着明显的线性关系；而液滴的运动速率比两相混合物的表观速率大.同时，提出了能够简单、准确描述液滴运动速率的实验拟合公式，并建立了预测液滴产生频率的模型.与实验结果对比发现，所建模型的预测值与实验值较吻合，两者偏差在± 12%以内.
关键词：中图分类号：文献标志码： A

关键词: , 微通道, 液滴, 弹状流, 流量比, 产生频率

Abstract:

Abstract： With the aid of a highspeed CCD camera, the droplet formation and flow characteristics in a polydimethylsiloxane (PDMS) rectangular microchannel with a width of 125 μm and a depth of 300 μm were experimentally investigated. By changing the volumetric flow ratios of water (dispersed phase) and silicon oil (continuous phase), the experimental data on droplet length, velocity, and generation frequency were obtained. Experimental results show that the dimensionless length of droplet in the microchannel can be well determined by the water/oil flow ratio, and a linear relationship is established between them. It is found that the velocity of droplet is larger than the twophase mixture superficial velocity. Besides, a simplified correlation for the precise prediction of the velocity of droplet was developed. In addition, a model predicting the generation frequency of droplet was proposed. The predicted values agree well with the experimental data within a deviation of approximately ±12%.

Key words: microchannel, droplet, slug flow, flow ratio, generation frequency

中图分类号:

TK 124

屈健，王谦，何志霞，韩新月，胡自成，刘涛，王超. 矩形微通道内液滴产生和运动特性实验研究[J]. 上海交通大学学报（自然版）, 2015, 49(01): 86-90.

QU Jian，WANG Qian，HE Zhixia，HAN Xinyue，HU Zicheng，LIU Tao，WANG Chao. An Experimental Study of Formation and Flow Charactristics of Droplets in a Rectangular Microchannel[J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 86-90.

参考文献

［1］Zhao C, Middelberg A. Twophase microfluidic flows ［J］. Chemical Engineering Science, 2011, 66(7): 13941411.

［2］Solvas X C, DeMello A. Droplet microfluidics: Recent developments and future applications ［J］. Chemical Communications, 2011, 47(7): 19361942.

［3］Zhao Y, Chen G, Yuan Q. Liuigliquid twophase flow patterns in a rectangular microchannel ［J］. AIChE Journal, 2006, 52(12): 40524060.

［4］Dessimoz A, Cavin L, Renken A, et al. Liquidliquid twophase flow patterns and mass transfer characteristics in rectangular glass microreactors ［J］. Chemical Engineering Science, 2008, 63(16): 40354044.

［5］Kashid M N, Agar D W, Turek S. CFD modelling of mass transfer with and without chemical reaction in the liquidliquid slug flow microreactor ［J］. Chemical Engineering Science, 2007, 62(1820): 51025109.

［6］Zhao Y C, Chen G W, Yuan Q. Liquidliquid twophase mass transfer in the Tjunction microchannels ［J］. AIChE Journal, 2007, 53(12): 30423053.

［7］Garstecki P, Fuerstman M J, Stone H A, et al. Formation of droplets and bubbles in a microfluidic Tjunction—Scaling and mechanism of breakup ［J］. Lab on a Chip, 2006, 6(3): 437446.

［8］Xu J H, Li S W, Tan J, et al. Correlations of droplet formation in Tjunction microfluidic devices: From squeezing to dripping ［J］. Microfluid Nanofluid, 2008, 5(6): 711717.

［9］Cherlo S K, Kariveti S, Pushpavanam S. Experimental and numerical investigations of twophase (liquidliquid) flow behavior in rectangular microchannels ［J］. Industrial and Engineering Chemistry Research, 2010, 49(2): 893899.

［10］Kashid M N, Agar D W. Hydrodynamics of liquidliquid slug flow capillary microreactor: Flow regimes, slug size and pressure drop ［J］. Chemical Engineering Journal, 2007, 131(13): 13.

［11］Sarrazin F, Bonometti T, Prat L, et al. Hydrodynamic structures of droplets engineered in rectangular microchannels ［J］. Microfluid Nanofluid, 2008, 5(1): 131137.

［12］Guillot P, Colin A. Stability of parallel flows in a microchannel after a T junction ［J］. Physical Review E, 2005, 72(6): 0663014.

编辑推荐 0

Metrics

阅读次数

全文

193

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	0	0	193

	来源	其他网站

	次数	193
	比例	100%

摘要

最新录用	在线预览	正式出版

0	0	61

	来源	其他网站

	次数	61
	比例	100%

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	熊雪娇, 贾志海, 邓勇, 费媛媛. 微结构梯度能表面振动液滴的运动特性[J]. 上海交通大学学报, 2021, 55(4): 455-461.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[9]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[10]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[11]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[12]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[13]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[14]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[15]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.