具有柱肋阵列与分离式柱肋阵列的冷却通道内流阻与传热实验研究

上海交通大学学报（自然版） ›› 2014, Vol. 48 ›› Issue (06): 782-787.

具有柱肋阵列与分离式柱肋阵列的冷却通道内流阻与传热实验研究

饶宇，李麟

(上海交通大学机械与动力工程学院，上海 200240)

收稿日期:2013-09-29 出版日期:2014-06-30 发布日期:2014-06-30
基金资助:
国家自然科学基金（81027001, 51176111）资助项目

Experimental Study of Flow and Heat Transfer in Cooling Channels with Pin Fin Arrays and Detached Pin Fin Arrays

RAO Yu,LI Lin

(School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Received:2013-09-29 Online:2014-06-30 Published:2014-06-30

摘要/Abstract

摘要：

在常规柱肋阵列冷却结构的基础上对一种新型分离式柱肋阵列冷却结构内的流动和传热特征进行了实验和数值计算研究.在雷诺数Re=8 200~50 500时，对具有新型分离式柱肋阵列的冷却通道和具有常规柱肋阵列的冷却通道内传热和流动压力损失性能进行了对比实验研究.对2种通道内的流动与传热进行了三维稳态数值计算，对比研究了其各自的速度场和局部传热特性，揭示了分离式柱肋阵列强化传热以及降低流动阻力的机理.实验结果表明，在所研究的Re范围内，与常规柱肋阵列通道相比，新型分离式柱肋阵列通道具有更高的平均努塞尔数(Nu)以及更小的阻力损失.

关键词: 分离式柱肋, 对流冷却, 流动, 传热, 燃气轮机

Abstract:

Pin fin array is a commonly used cooling structure in a gas turbine blade. Based upon the conventional pin fin cooling structure, this paper proposed a novel cooling structure with detached pin fin arrays. In the Reynolds number range of 8 200 to 50 500, a comparative experimental study was conducted to obtain the pressure loss and heat transfer characteristics in the cooling channels with detached pin fin arrays and with conventional pin fin arrays respectively. The results indicated that, compared to the counterpart of the pin fin channel, the detached pin fin channel has higher average Nusselt numbers and significantly reduced pressure loss over the studied Reynolds number range. Moreover, threedimensional conjugate computations were carried out for similar experimental conditions, and the computations showed the detailed characteristics in the distribution of the velocity and turbulence level in the flow, which revealed the underlying mechanisms for the associated pressure loss reduction and heat transfer enhancements in the channels with detached pinfin arrays.

Key words: detached pin fin arrays, convective cooling, flow, heat transfer, gas turbine

中图分类号:

TK 124

饶宇，李麟. 具有柱肋阵列与分离式柱肋阵列的冷却通道内流阻与传热实验研究[J]. 上海交通大学学报（自然版）, 2014, 48(06): 782-787.

RAO Yu,LI Lin. Experimental Study of Flow and Heat Transfer in Cooling Channels with Pin Fin Arrays and Detached Pin Fin Arrays[J]. Journal of Shanghai Jiaotong University, 2014, 48(06): 782-787.

参考文献

［1］曹玉章,陶智,徐国强,等. 航空发动机传热学［M］.北京:北京航空航天大学出版社, 2005.

［2］Han J C, Dutta S, Ekkad S. Gas turbine heat transfer and cooling technology［M］. Florida: CRC Press, 2012.

［3］Han J C. Turbine blade cooling studies at Texas A&M University: 1980-2004［J］. Journal of Thermophysics and Heat Transfer, 2006, 20(2): 161187.

［4］Metzger D E, Berry R A, Bronson J P. Developing heat transfer in rectangular ducts with staggered arrays of short pin fins［J］. Journal of Heat Transfer, 1982, 104(4): 700706.

［5］Chyu M K, Natarajan V, Hsing Y C, et al. Heat transfer contributions of pins and endwall in pinfin arrays: Effects of thermal boundary condition modeling［J］. Journal of Turbomachinery, 1999, 121(2): 257263.

［6］Ligrani P M, Oliveira M M, Blaskovich T. Comparison of heat transfer augmentation techniques［J］. AIAA Journal, 2003, 41(3): 337362.

［7］朱惠人, 许都纯. 不同直径及形状的短扰流柱群的流阻及换热［J］. 航空动力学报, 2002, 17(2): 246249.

ZHU Huiren.XU Duchun. Heat transfer and pressure drop of short pinfin array with different diameter and shape［J］. Journal of Aerospace Power, 2002,17(2): 246249.

［8］Chang S W, Yang T L, Huang C C, et al. Endwall heat transfer and pressure drop in rectangular channels with attached and detached circular pinfin array［J］. International Journal of Heat and Mass Transfer, 2008, 51(21): 52475259.

［9］Rao Y, Wan C, Zang S. An experimental and numerical study of flow and heat transfer in channels with pin findimple combined arrays of different configurations［J］. Journal of Heat Transfer, 2012, 134(12): 121901.

［10］Weigand B, Crawford M E, Kays W M. Convective heat and mass transfer［M］. New York: McGrawHill Inc, 2004.

［11］Gee D L, Webb R L. Forced convection heat transfer in helically ribroughened tubes［J］. International Journal of Heat and Mass Transfer, 1980, 23(8): 11271136.

［12］Kline S J, McClintock F A. Describing uncertainties in singlesample experiments［J］. Mechanical Engineering, 1953, 75(1): 38.

[1]	王志伟, 何炎平, 李铭志, 仇明, 黄超, 刘亚东. 基于计算流体力学的90° 弯管气液两相流数值模拟及流型演化[J]. 上海交通大学学报, 2022, 56(9): 1159-1167.
[2]	肖克华, 罗稼昊, 饶宇. 航空发动机涡轮叶片尾缘楔形通道交错肋冷却实验[J]. 上海交通大学学报, 2022, 56(8): 1034-1042.
[3]	赵忠良, 李浩, 赖江, 杨海泳, 王晓冰, 李玉平. 导弹模型直气复合气动特性研究[J]. 空天防御, 2022, 5(3): 1-9.
[4]	吴王浩, 段旭, 张鑫, 陈丹, 徐振东. 高马赫数钝头体气动/传热一体化计算方法研究[J]. 空天防御, 2022, 5(3): 87-92.
[5]	易仕和, 丁浩林. 适用高超声速飞行环境的超声速气膜冷却光学窗口研究进展[J]. 空天防御, 2021, 4(4): 1-13.
[6]	陈清华, 高伟, 苏国用, 关维娟, 秦汝祥, 季家东, 马杨斌. 基于激光点热源非稳态传热模型测固体材料热物性参数[J]. 上海交通大学学报, 2021, 55(4): 471-479.
[7]	田新亮. “软尾减阻”述评[J]. 上海交通大学学报, 2021, 55(2): 213-214.
[8]	王瑞, 肖瑶, 顾汉洋, 叶亚楠. 螺旋管内单相流动周向非均匀传热现象的数值模拟[J]. 上海交通大学学报, 2020, 54(7): 688-696.
[9]	王锴，夏添，饶宇. 三通道旋流冷却流动与传热性能[J]. 上海交通大学学报, 2020, 54(5): 481-489.
[10]	赖生智，吴亚东，田杰，欧阳华. 不同叶顶间隙下压气机旋转不稳定性特性[J]. 上海交通大学学报, 2020, 54(3): 265-276.
[11]	李煜, 程广益, 李宗阳, 窦怡彬, 蒋君庭. 固体火箭发动机喷管两相流动下的热固耦合研究[J]. 空天防御, 2020, 3(1): 1-9.
[12]	邹良旭，马非，孟昭男，张鹏. 基于群体平衡模型的冰浆流动与传热特性数值研究[J]. 上海交通大学学报, 2019, 53(12): 1459-1465.
[13]	刘宏升1，姜霖松1，吴丹2，解茂昭1. 基于大涡模拟的三维随机球堆积床内湍流流动特性[J]. 上海交通大学学报（自然版）, 2018, 52(9): 1050-1057.
[14]	牟介刚a，吴振兴a，周佩剑a，谷云庆a，吴登昊b，任芸b. 自吸离心泵蜗壳内瞬态流动特性[J]. 上海交通大学学报（自然版）, 2018, 52(4): 461-468.
[15]	刘飞龙, 鞠朋朋, 倪浩. 基于流动保障的水下管汇湿式保温数值模拟[J]. 海洋工程装备与技术, 2018, 5(2): 95-99.