烧结金属多孔材料的渗透和导热性能测试及孔隙特征分析

上海交通大学学报（自然版） ›› 2013, Vol. 47 ›› Issue (03): 352-357.

烧结金属多孔材料的渗透和导热性能测试及孔隙特征分析

任小军1，张鹏1，王小军2，潘雁频2

(1. 上海交通大学制冷与低温工程研究所，上海 200240； 2. 兰州物理研究所，真空低温技术与物理重点实验室，兰州 730000)

收稿日期:2012-04-13 出版日期:2013-03-28 发布日期:2013-03-28
基金资助:
真空低温技术与物理重点实验室开放基金（ZDK1001）

Permeability, Thermal Conductivity and the Pore Characters of Sintered Porous Metal Materials

REN Xiao-Jun-1, ZHANG Peng-1, WANG Xiao-Jun-2, PAN Yan-Pin-2

(1. Institute of Refrigeration and Cryogenics, Shanghai Jiaotong University, Shanghai 200240, China; 2. National Key Lab of Vacuum & Cryogenics Technology and Physics, Lanzhou Institute of Physics, Lanzhou 730000, China)

Received:2012-04-13 Online:2013-03-28 Published:2013-03-28

摘要/Abstract

摘要： 摘要：
为研究烧结金属多孔材料的各项性能参数，测试了多孔材料的孔隙率；在自然断裂表面扫描电镜（SEM）图像基础上进行图像处理与分析，得到面孔隙率以及平均孔径与孔径分布特征；设计了以达西定律为依据的实验系统对渗透系数和透气度进行测试，分析了原始粉末粒度、孔隙率、厚度、低温工况、平均孔径以及孔径分布等因素对渗透性能的影响；使用hot disk热导测试装置测量了有效热导率，并与经验公式的预测结果进行比较.结果表明，体积平均孔径与孔径分布特征能有效反映透气度的变化规律；厚度对烧结金属多孔材料的孔隙率和渗透系数有着重要影响，厚度越小，原始粉末颗粒的直径越大，壁面效应越明显；低温工况不会改变烧结金属多孔材料的渗透性能. 关键词：
金属多孔材料；烧结；渗透系数；孔隙率；热导率中图分类号： TK 172
文献标志码： A

Abstract: In order to characterize the sintered porous metal materials, porosity was tested. Surface porosity, average pore size and pore size distribution were obtained through image processing and analysis based on scanning electron microscope(SEM) images of nature fracture surfaces. Permeability and air permeability were measured by experimental apparatus based on Darcy’s law, and the effects of original power grain size, porosity, thickness, low temperature condition, average pore size and pore size distribution on permeability were also discussed. Effective thermal conductivities were measured by a hot disk thermal constant analyzer and compared with predicted results from empirical equations. The results demonstrate that volume average pore size and pore size distribution can effectively reflect the change of air permeability, and thickness has an important influence on porosity and permeability. A stronger wall effect is presented in the case of a thinner thickness and a bigger original power grain size. Low temperature condition has no influence on permeability.

Key words: porous metal material, sintering, permeability, porosity, thermal conductivity

任小军1, 张鹏1, 王小军2, 潘雁频2. 烧结金属多孔材料的渗透和导热性能测试及孔隙特征分析 [J]. 上海交通大学学报（自然版）, 2013, 47(03): 352-357.

REN Xiao-Jun-1, ZHANG Peng-1, WANG Xiao-Jun-2, PAN Yan-Pin-2. Permeability, Thermal Conductivity and the Pore Characters of Sintered Porous Metal Materials[J]. Journal of Shanghai Jiaotong University, 2013, 47(03): 352-357.

参考文献

［1］汤慧萍，谈萍，奚正平，等.烧结金属多孔材料研究进展［J］. 稀有金属材料与工程, 2006,35(增2):429431.
TANG Huiping, TAN Ping, XI Zhengping, et al. Research progress of sintered porous metal［J］. Rare Metal Materials
and Engineering, 2006, 35(sup 2):429431.
［2］孔佩敏，张健，孙旭东，等.金属多孔材料孔结构的表征技术［J］.热加工工艺，2009,38（12）：5054.
KONG Peimin, ZHANG Jian, SUN Xudong, et al. Characterization technology of pore structure of metallic porous
materials ［J］. Hot Working Technology, 2009, 38(12):5054.
［3］奚正平, 汤慧萍, 朱纪磊，等. 金属多孔材料在能源与环保中的应用［J］. 稀有金属材料与工程, 2006,35(增2):413417.
XI Zhengping, TANG Huiping, ZHU Jilei , et al. Application of porous metal in fields of energy source and
environment protection［J］. Rare Metal Materials and Engineering, 2006, 35(sup 2):413417.
［4］汤慧萍，奚正平，廖际常，等.金属多孔材料表面燃烧器的发展现状［J］. 稀有金属材料与工程, 2006,35(增2):423427.
TANG Huiping, XI Zhengping, LIAO Jichang, et al. Progress of metal porous media surface burner［J］. Rare Metal
Materials and Engineering, 2006, 35(sup 2):423427.
［5］汪强兵，汤慧萍，奚正平，等.煤气化技术用金属多孔材料研究进展［J］. 稀有金属材料与工程, 2006,35(sup 2):448451.
WANG Qiangbing, TANG Huiping, XI Zhengping, et al. The study progress of the metal porous material using in the
gasification technology［J］. Rare Metal Materials and Engineering, 2006, 35(sup 2): 448451.
［6］王小军, 任小军, 张鹏, 等. 超流氦相分离器的研究综述［J］. 低温与超导, 2011,39(7):612.
WANG Xiaojun, REN Xiaojun, ZHANG Peng, et al. A review of the porous plug phase separator for superfluid helium［J］.
Cryogenics and Superconductivity, 2011, 39(7): 612.
［7］He Y. Rapid thermal conductivity measurement with a hot disk sensor. Part 1. Theoretical considerations［J］.
Thermochimi Acta, 2005, 436:122129.
［8］Yuan S W K. The nonnewtonian heat and mass transport of helium Ⅱin porous media used for vaporliquid phase
separator［D］. Los Angeles: University of California, 1985.
［9］Montes J M, Rodriguez J A, Herrera E J. Thermal and electric conductivities of sintered power compacts ［J］. Power
Metallurgy, 2003, 46(3): 251256.
［10］Bhattacharya A, Calmidi V V, Mahajan R L. Thermophysical properties of high porosity metal foams［J］.
International Journal of Heat and Mass Transfer, 2002, 45:10171031.
［11］Fricke H. A mathematical treatment of the electrical conductivity and capacity of disperse systems［J］. Physical
Review, 1924, 24:575587.
［12］Koh J C, Fortini A. Thermal conductivity and electrical resistivity of porous materials［R］. NASA Report, NO NAS3
12012, CR120854, USA,1971.