基于多点约束法的减摇鳍加强结构
CAD/CAE一体化设计

上海交通大学学报（自然版） ›› 2012, Vol. 46 ›› Issue (08): 1280-1283.

基于多点约束法的减摇鳍加强结构 CAD/CAE一体化设计

周清华, 杜留法, 杨雄辉

（中国舰船研究设计中心，武汉 430064）

收稿日期:2011-10-19 出版日期:2012-08-31 发布日期:2012-08-31
基金资助:
国防十二五预先研究项目（401040202）

CAD/CAE Integrated Design of Fin Stabilizer Reinforced Structure Based on Multi-Point Constraint Method

ZHOU Qing-Hua, DU Liu-Fa, YANG Xiong-Hui

(China Ship Development and Design Center, Wuhan 430064, China)

Received:2011-10-19 Online:2012-08-31 Published:2012-08-31

摘要/Abstract

摘要： 针对减摇鳍加强结构设计难度大和载荷复杂的特点，提出一种CAD/CAE一体化设计和分析方法.对减摇鳍加强结构进行三维结构设计、水动力分析和结构性能评估.其中，采用多点约束法实现模拟减摇鳍加强结构与鳍座的2种非协调性单元之间的载荷传递，应用自由面格林函数法和三维线性势流理论求解船体运动响应和水动压力.通过研究关键技术，为减摇鳍加强结构设计和分析提供新的技术途径.

关键词: 减摇鳍, 多点约束法, 虚拟单元, CAD/CAE一体化, 势流理论

Abstract: According to the complicated characteristic of the ship fin stabilizer reinforced structural design and loads, a CAD/CAE integrated design and analysis method was presented to do three-dimensional structure design, hydro-dynamic analysis and structure property assessment of fin stabilizer reinforced structure. In this research, the multi-point constraint method is adopted to realize the load transfer between two kinds of discordant elements, which simulate fin stabilizer reinforced structure and fin stabilizer foundation, the ship motion response and hydrodynamic pressure are obtained by the free surface Green function method and the three dimensional linear potential flow theory. The key techniques discussed in this research provide a new technical approach for fin stabilizer reinforced structural design and analysis.

Key words: fin stabilizer, multi-point constraint method, dummy element, CAD/CAE integration, potential theory

中图分类号:

U 661.43

周清华, 杜留法, 杨雄辉. 基于多点约束法的减摇鳍加强结构 CAD/CAE一体化设计 [J]. 上海交通大学学报（自然版）, 2012, 46(08): 1280-1283.

ZHOU Qing-Hua, DU Liu-Fa, YANG Xiong-Hui. CAD/CAE Integrated Design of Fin Stabilizer Reinforced Structure Based on Multi-Point Constraint Method[J]. Journal of Shanghai Jiaotong University, 2012, 46(08): 1280-1283.

参考文献

［1］Surana K S.Transition finite elements for axisymmetric stress analysis ［J］. International Journal for Numerical Methods in Engineering， 1980, 15(6):809832.
［2］Surana K S.Transition finite elements for threedimensional stress analysis ［J］. International Journal for Numerical Methods in Engineering， 1980, 15(7):9911020.
［3］王勖成.有限单元法［M］.北京：清华大学出版社，2003.
［4］吴嘉蒙,刘见华,金咸定.非标准交接板梁组合结构的有限元建模新方法［J］.上海交通大学学报，2002, 36(11):16211624.
WU Jiameng, LIU Jianhua, JIN Xianding.A new finite element method model for platebeam combined structures with nonstandard connection［J］. Journal of Shanghai Jiaotong University，2002, 36(11):16211624.
［5］蔡洪能, 王雅生, 闵行.有限元分析中体元和壳元的连接［J］.西安交通大学学报，1999, 33(9):7679.
CAI Hongneng, WANG Yasheng, MIN Hang. Connection of brick element and shell element in finite element analysis ［J］. Journal of Xi’an Jiaotong University， 1999, 33(9):7679.
［6］张永昌.MSC.Nastran有限元分析理论基础与应用［M］.北京：科学出版社，2004.
［7］Perez T, Goodwin G C. Constrained predictive control of ship fin stabilizers to prevent dynamic stall ［J］. Control Engineering Practice, 2008, 16(4):482494.
［8］冯国庆,刘相春,任慧龙.基于PCL语言的波浪压力自动加载方法［J］.船舶力学,2006,10(5):107112.
FENG Guoqing, LIU Xiangchun, REN Huilong. A PCL based automatic loading approach for wave pressures ［J］. Journal of Ship Mechanics， 2006, 10(5):107112.
［9］Lee S, Rhee K P, Choi J W. Design of the roll stabilization controller using fin stabilizers and pod propellers ［J］. Applied Ocean Research, 2011, 33(4):229239.
［10］Lee S H.A CADCAE integration approach using featurebased multiresolution and multiabstraction modeling techniques［J］. ComputerAided Design, 2005, 37(9):941955.

[1]	姚汝林, 樊奇东, 余龙, 汪学锋. 基于重叠网格方法的中型邮轮减摇鳍数值和试验分析[J]. 上海交通大学学报, 2023, 57(S1): 178-184.
[2]	袁心怡, 苏焱, 刘祖源. 基于高精度Boussinesq方程的三维浅水晃荡数值研究[J]. 上海交通大学学报, 2021, 55(5): 521-526.
[3]	赵东亚，胡志强，陈刚. 浮式液化天然气系统液体装载船体的耦合响应[J]. 上海交通大学学报, 2019, 53(5): 540-548.
[4]	陈嘉豪,刘格梁,胡志强. 海上浮式风机时域耦合程序原理及其验证[J]. 上海交通大学学报, 2019, 53(12): 1440-1449.
[5]	韩旭亮, 谢彬, 王世圣, 喻西崇, 李焱. 海上多浮体作业系统运动响应数值模拟及模型试验[J]. 海洋工程装备与技术, 2017, 4(5): 287-292.
[6]	文俊华, 陈震. 五体船波浪载荷特性及侧体布局影响规律分析 [J]. 上海交通大学学报（自然版）, 2012, 46(08): 1230-1237.
[7]	徐敏, 张世联. 三体船波浪载荷与片体布局优化[J]. 上海交通大学学报（自然版）, 2011, 45(04): 470-474.
[8]	王从晶,夏利娟. 全船有限元结构分析的若干关键技术[J]. 上海交通大学学报（自然版）, 2010, 44(06): 768-0773.