基于稳定性分析的电控离合器任务调度周期设计

doi:10.16183/j.cnki.jsjtu.2019.04.007

摘要/Abstract

摘要： 离合器接合过程在短时间内经过空行程、滑摩和锁止3个阶段，需要合理设计其电子控制器的实时任务调度周期，以避免离散化导致系统失稳，降低接合品质.基于实时调度与控制性能协同设计的思路，建立离合传动系统动力学模型及其闭环控制模型，采用z变换进行离散化，根据离散系统稳定性得到控制任务的临界调度周期，然后模拟计算不同任务调度周期对离合器接合过程冲击度、滑摩功的影响，并在传动台架上进行试验验证.结果表明，任务调度周期小于临界值时，离合器接合品质未见显著改变；但任务调度周期一旦超过临界值，接合品质急剧恶化.

关键词: 任务调度周期, 离合器接合控制, 稳定性, 动态响应

Abstract: Clutch engagement process consists of three sequential phases, i.e., open, slipping and stick (locked). The task scheduling period of the clutch control task should be selected carefully in case that the improper discretization leads to instability and deteriorates the engagement quality. An integrated approach which considers both control performance and real-time scheduling aspects is applied to allocate task scheduling periods. Firstly, the model of a closed-loop control system for a powertrain with a clutch element is developed and discretized by z-transformation. The stability criterion of the discretized system during slipping phase is derived, thus, the critical task scheduling period can be determined. The engagement quality in terms of vehicle jerk and clutch frictional losses is evaluated by simulation data, further, the dynamic response is also tested on transmission dynamometers. The results show that, the clutch engagement quality is insensitive to the task period which is less than the critical value, however, is deteriorated seriously when the task period exceeds the critical value.

Key words: task scheduling period, clutch engagement, stability, dynamic response

中图分类号:

U 463

程小宣,陈俐. 基于稳定性分析的电控离合器任务调度周期设计[J]. 上海交通大学学报（自然版）, 2019, 53(4): 438-446.

CHENG Xiaoxuan,CHEN Li. Task Scheduling Period Selection Based on Stability Analysis of Automatic Clutches[J]. Journal of Shanghai Jiaotong University, 2019, 53(4): 438-446.

参考文献

［1］葛安林, 吴锦秋, 郭万富. 离合器最佳接合规律的研讨［J］. 汽车工程, 1988(2): 54-65. GE Anlin, WU Jinqiu, GUO Wanfu. Research on optimizing enagaged-schedule of clutch［J］. Automotive Engineering, 1988(2): 54-65. ［2］王书全. 液力机械式自动变速器技术及发展［J］. 北京汽车, 1997(3): 1-6. WANG Shuquan. Development of hydraulic mechanical automatic transmission［J］. Beijing Automotive Engineering, 1997(3): 1-6. ［3］李君, 张建武, 冯金芝, 等.电控机械式自动变速器的发展、现状和展望［J］. 汽车技术, 2000(3): 1-3. LI Jun, ZHANG Jianwu, FENG Jinzhi, et al. Deve-lopment, current situation and forecast of electric controlled automated mechanical transmission［J］. Automobile Technology, 2000(3): 1-3. ［4］吴光强, 杨伟斌, 秦大同. 双离合器式自动变速器控制系统的关键技术［J］. 机械工程学报, 2007, 43(2): 13-21. WU Guangqiang, YANG Weibin, QIN Datong. Key technique of dual clutch transmission control system［J］. Journal of Mechanical Engineering, 2007, 43(2): 13-21. ［5］杨亚联, 秦大同, 谢勇. 汽车无级变速器的类型及基本原理［J］. 汽车技术, 1997(3): 59-61. YANG Yalian, QIN Datong, XIE Yong. Type and basic principle of automobile stepless transmission［J］. Automobile Technology, 1997(3): 59-61. ［6］CHAN C C. The state of the art of electric, hybrid, and fuel cell vehicles［J］. Proceedings of the IEEE, 2007, 95(4): 704-718. ［7］陈俐, 张建武, 习纲. 自动离合器的自适应最优控制［J］. 上海交通大学学报, 2000, 34(10): 1312-1316. CHEN Li, ZHANG Jianwu, XI Gang. Adaptive optimal control for automatic clutch［J］. Journal of Shanghai Jiao Tong University, 2000, 34(10): 1312-1316. ［8］HORN J, BAMBERGER J, MICHAU P, et al. Flatness-based clutch control for automated manual transmissions［J］. Control Engineering Practice, 2003, 11(12): 1353-1359. ［9］GLIELMO L, IANNELLI L, VACCA V, et al. Gearshift control for automated manual transmissions［J］. Control Engineering Practice, 2006, 11(1): 17-26. ［10］GAO B, CHEN H, LIU Q, et al. Clutch slip control of automatic transmissions: A nonlinear feedforward-feedback design［C］//Proceedings of the 2010 IEEE International Conference on Control Applications, Yokohama, 2010: 884-889. ［11］DOLCINI P, BECHART H, WIT C C D. Observer-based optimal control of dry clutch engagement［C］//Proceedings of the 44th IEEE Conference on Decision and Control, Seville, Spain, 2005, 62(4): 440-445. ［12］GLIELMO L, VASCA F. Optimal control of dry clutch engagement［M］. SAE Technical Paper, 2000. ［13］AMARI R, TONA P, ALAMIR M. Experimental evaluation of a hybrid MPC strategy for vehicle start-up with an automated manual transmission［C］//Proceedings of the 2009 European Control Conference, Budapest, 2009: 4271-4277. ［14］刘怀, 王绪伟, 胡继峰. 控制系统周期性任务调度中优化采样频率的求取［J］. 计算机工程与应用, 2002, 38(14): 76-78. LIU Huai, WANG Xuwei, HU Jifeng. Solving optimal sampling frequencies for periodic task scheduling in control system［J］. Computer Engineering and Applications, 2002, 38(14): 76-78. ［15］WU Y, BUTTAZZO G, BINI E, et al. Parameter selection for real-time controllers in resource-constrained systems［J］. IEEE Transactions on Industrial Informatics, 2010, 6(4): 610-620. ［16］AYDIN H, MELHEM R, MOSSE D, et al. Optimal reward-based scheduling for periodic real-time tasks［J］. IEEE Transactions on Computers, 2001, 50(2): 111-130. ［17］CERVIN A, VELASCO M, MARTI P, et al. Optimal online sampling period assignment: Theory and experiments［J］. IEEE Transactions on Control Systems Technology, 2011, 19(4): 902-910. ［18］DAI S L, LIN H, GE S S. Scheduling-and-control codesign for a collection of networked control systems with uncertain delays［J］. IEEE Transactions on Control Systems Technology, 2010, 18(1): 66-78. ［19］ZHANG L, GAO H, KAYNAK O. Network-induced constraints in networked control systems—A survey［J］. IEEE Transactions on Industrial Informatics, 2013, 9(1): 403-416. ［20］KULKARNI M, SHIM T, ZHANG Y. Shift dynamics and control of dual-clutch transmissions［J］. Mechanism and Machine Theory, 2007, 42(2): 168-182. ［21］CHEN L, XI G, SUN J. Torque coordination control during mode transition for a series-parallel hybrid electric vehicle［J］. IEEE Transactions on Vehicular Technology, 2012, 61(7): 2936-2949. ［22］CHEN L, LIU F, YAO J, et al. Design and validation of clutch-to-clutch shift actuator using dual-wedge mechanism［J］. Mechatronics, 2017, 42(Sup C): 81-95. ［23］GAO B, CHEN H, HU Y, et al. Nonlinear feedforward-feedback control of clutch-to-clutch shift technique［J］. Vehicle System Dynamics, 2011, 49(12): 1895-1911. ［24］陈俐, 张建武, 黄维纲. 汽车电控离合器的反馈线性化控制［J］. 上海交通大学学报, 2000, 34(3): 384-388. CHEN Li, ZHANG Jianwu, HUANG Weigang. Feedback linearization control for electrically controllable clutches［J］. Journal of Shanghai Jiao Tong University, 2000, 34(3): 384-388. ［25］程东升, 顾力强, 张建武. 基于反馈线性化的汽车AMT离合器滑模控制［J］. 汽车工程, 2002, 24(5): 384-386. CHENG Dongsheng, GU Liqiang, ZHANG Jianwu. Sliding mode control for electrically controlled clutch of AMT based on feedback linearization［J］. Automotive Engineering, 2002, 24(5): 384-386. ［26］RICHARD C D, ROBERT H B. Modern control systems［M］. 13th Edition. Boston: Pearson, 2016: 602-620.

[1]	. 基于输入映射及事件触发自适应策略的刚柔混合机械臂模型预测控制[J]. J Shanghai Jiaotong Univ Sci, 2026, 31(1): 36-47.
[2]	高磊, 马骏超, 吕敬, 刘佳宁, 王晨旭, 蔡旭. 基于频域模态法的新能源电力系统振荡稳定性评估[J]. 上海交通大学学报, 2025, 59(6): 821-835.
[3]	王语阳, 张琛, 张宇, 王一鸣, 许颇, 蔡旭. 提升弱网有功稳定输出能力的光伏逆变器Q-V下垂系数在线调整方法[J]. 上海交通大学学报, 2025, 59(6): 845-856.
[4]	. 浮动式多机器人协调吊运系统负载稳定性分析[J]. J Shanghai Jiaotong Univ Sci, 2025, 30(6): 1162-1170.
[5]	. 特发性脊柱侧后凸的动态响应[J]. J Shanghai Jiaotong Univ Sci, 2025, 30(3): 482-492.
[6]	司文佳, 陈俊儒, 张成林, 刘牧阳. 直流电压控制对跟网型并网变换器的影响机理[J]. 上海交通大学学报, 2025, 59(3): 313-322.
[7]	胡猛1, 梁真源2, 徐志升3, 曹英举3. 励磁涌流抑制器在南海奋进FPSO上的应用[J]. 海洋工程装备与技术, 2025, 12(2): 48-51.
[8]	韩华玲, 贾一超, 马子涵, 邓俊, 黄萌. 基于神经网络的LCL型单相并网逆变器稳定性分析[J]. 上海交通大学学报, 2025, 59(12): 1805-1814.
[9]	费壬翔, 徐海亮, 葛平娟, 陈翔宇. 不对称弱电网下双馈风力发电机稳定运行域评估及扩展方法[J]. 上海交通大学学报, 2025, 59(10): 1510-1522.
[10]	徐敏杰1, 2, 王全保1, 段登平1. 变质心机构动态响应下的平流层飞艇纵向运动仿真[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(6): 1139-1150.
[11]	邓旭a, 冯正平a, b, 何晨璐a, 崔振华a. 水下无人平台载荷释放过程中的姿态镇定控制[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(5): 766-772.
[12]	张啸天1，何德峰1，廖飞2. 复杂环境及约束下舰载机自动着舰迭代模型预测控制[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(4): 712-724.
[13]	王晓静1，刘晓华2，高荣2. 具有状态时滞的奇异随机系统基于滚动时域控制的镇定[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(3): 436-449.
[14]	吴斌峰. 海洋石油平台智能化技术在生产稳定性与效率提升中的应用研究[J]. 海洋工程装备与技术, 2024, 11(2): 29-33.
[15]	王志伟1, 何炎平1, 李铭志1, 仇明2, 黄超1, 刘亚东1, 王梓1. 水平管内气液两相流流固耦合动力响应特性的数值研究[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 237-244.