基于模糊随机故障模式与影响分析的
产品再设计模块识别

doi:10.16183/j.cnki.jsjtu.2017.10.006

摘要/Abstract

摘要： 针对现有再设计方法基本以用户需求为依据，较少考虑产品运行故障数据的问题，在产品运行故障数据基础上，提出了一种基于模糊随机故障模式与影响分析(Failure Mode and Effects Analysis, FMEA)的再设计模块识别方法.引入再设计必要性指数作为产品模块再设计的依据，根据故障发生的随机性以及风险判断模糊性特点，构建了模糊随机FMEA模型来度量故障模式与产品模块之间的关联关系，采用可信性理论和模糊随机模拟技术处理模糊变量和随机变量多值性问题，并通过履带起重机再设计模块识别验证了所提方法的可行性与有效性.

关键词: , 产品再设计模块识别, , 故障模式与影响分析, 可信性理论

Abstract: Redesign is a work for improving a new product after it has been used a period. Identification of the redesign modules is the precondition. The existing identification methods mainly focus on customer demands, without considering product failure data. Therefore, a new identification method is proposed using fuzzy random FMEA. A redesign necessity index is defined to evaluate the design risk of product modules. Considering the randomness and fuzziness of the risk judgment, a fuzzy random FMEA model is constructed to measure the relationship between the failure modes and the product modules. Besides, credibility theory and fuzzy stochastic simulation technique are employed to deal with the multi valued problem of fuzzy variables and random variables. Finally, the feasibility and effectiveness of the proposed method is verified by the identification and verification of the crawler crane.

Key words: redesign module identification, failure mode and effects analysis, credibility theory

中图分类号:

周鹏辉，马红占，陈东萍，陈梦月，褚学宁. 基于模糊随机故障模式与影响分析的
产品再设计模块识别[J]. 上海交通大学学报（自然版）, 2017, 51(10): 1189-1195.

ZHOU Penghui,MA Hongzhan,CHEN Dongping,CHEN Mengyue,CHU Xuening. Identification of Product Redesign Modules Based on
Fuzzy Random Failure Mode and Effects Analysis[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1189-1195.

参考文献

［1］李良. 工程机械产品识别设计策略研究［D］.长沙: 湖南大学设计艺术学院, 2013.
［2］黄风立. 基于顾客满意度的产品方案再设计研究［D］. 杭州: 浙江工业大学科学院, 2005.
［3］SMITH S, SMITH G, SHEN Y, Redesign for product innovation［J］. Design Studies, 2012, 33(2): 160184.
［4］杨涛, 杨育, 薛承梦, 等. 考虑客户需求偏好的产品创新设计方案多属性决策评价［J］. 计算机集成制造系统, 2015, 21(2): 417426.
YANG Tao, YANG Yu, XUE Chengmeng, et al. Multiattribute decisionmaking evaluation method for product innovation design scheme with demand preferences of customers［J］. Computer Integrated Manufacturing Systems, 2015, 21(2): 417426.
［5］徐芳平. 基于在线评论的产品再设计需求研究［D］.大连: 大连理工大学科学院, 2012.
［6］XU K , TANG L C , XIE M , et al. Fuzzy assessment of FMEA for engine systems［J］. Reliability Engineering and System Safety, 2002, 75(1): 1729.
［7］BOWLES J B, PELAEZ C E. Fuzzy logic prioritization of failures in a system failure modes effects and criticality analysis［J］.Reliability Engineering System Safety, 1995, 50(2): 203213.
［8］KAI M T, LIM C P. Fuzzy FMEA with a guided rules reduction system for prioritization of failures ［J］. International Journal of Quality & Reliability Management, 2006, 23(8): 10471066.
［9］门峰. 模糊集理论与灰色关联理论的FMEA方法［J］. 工业工程, 2008, 11(4): 109112.
MEN Feng. FMEA method based upon fuzzy set theory and grey relational theory［J］. Industrial Engineering Journal, 2008, 11(4): 109112.
［10］ZHANG Zaifang, CHU Xuening. Risk prioritization in failure mode and effects analysis under uncertainty［J］. Expert Systems with Applications, 2011, 38(1): 206214.
［11］LIU B, LIU Y. Expected value of fuzzy variable and fuzzy expected value models［J］. IEEE Transactions on Fuzzy Systems, 2002, 10(4): 445450.
［12］凌丹. 威布尔分布模型及其在机械可靠性中的应用研究［D］.成都: 电子科技大学科学院, 2011.

编辑推荐

Metrics

阅读次数

全文

127

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	4	0	123

来源	本网站	其他网站

次数	31	96
比例	24%	76%

摘要

985

最新录用	在线预览	正式出版

86	0	899

来源	本网站	其他网站

次数	485	500
比例	49%	51%

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.