基于温度积分方法的大型数控机床光栅定位热误差建模及实时补偿

上海交通大学学报（自然版） ›› 2016, Vol. 50 ›› Issue (05): 710-715.

基于温度积分方法的大型数控机床光栅定位热误差建模及实时补偿

冯文龙，黄奕乔，拓占宇，李慧敏，杨建国

（上海交通大学机械与动力工程学院，上海 200240）

收稿日期:2015-06-29 出版日期:2016-05-28 发布日期:2016-05-28
基金资助:
辽宁省科技创新重大专项（201301001），上海市经信委军民结合项目（JMJH2013002），上海市闵行区产学研项目（2013MH111），上海市引进技术的吸收与创新技术项目（13XI07）

Modeling of Thermally Induced Grating Positioning Error of Large Machine Tools Based on Temperature Integral Method

FENG Wenlong,HUANG Yiqiao,TUO Zhanyu,LI Huimin,YANG Jianguo

(School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Received:2015-06-29 Online:2016-05-28 Published:2016-05-28

摘要/Abstract

摘要： 摘要：为了提高大型数控机床的光栅定位精度，提出了基于热特性分析的光栅定位热误差建模理论及补偿方法.阐述了光栅受热膨胀产生热伸长从而导致定位偏差的机理，并对光栅定位误差产生的影响及表现形式进行了说明.建立了光栅热伸长量和温升量的线性关系表达式.在光栅尺上均匀布置多个温度传感器，实时采集光栅尺多点温度，通过插值运算，拟合出光栅尺各点的温度值.由于在机床运动过程中，光栅尺各点的温升量不尽相同，采用对光栅尺各点温升量积分的方法，求出光栅各点热伸长量，建立了光栅定位热误差模型.利用自主研发的数控机床误差补偿系统，应用光栅定位热误差模型，对落地镗床TK6920进行光栅尺定位热误差补偿.结果显示：光栅定位热误差模型对运动过程中的光栅定位误差进行准确的预测，补偿后残差控制在15 μm以内，定位精度提升90%以上，显著提高了光栅的定位精度.

关键词: 大型数控机床, 光栅定位热误差, 温度积分方法, 误差补偿

Abstract: Abstract： To decrease the grating positioning error of large machine tools, a novel modeling theory based on thermal characteristic analysis with its compensation method were proposed. The case of the error was analyzed to be the thermal deformation of the grating scale, whose manifestations were discussed. By analyzing the thermal characteristic, the mathematical expression between the elongation of grating scale and the variation of temperature was established. Several temperature sensors were installed on the grating scale, with which the temperature of grating scale were recorded. The temperature of each point on the grating scale were calculated by interpolating between adjacent sensors. The thermally induced positioning error of the grating scale model was established by conducting the integral for the variations of position and temperature. By using the developed compensation system, the compensation for floor type borer TK6920 was implemented by applying the established model. The results show that the thermally induced positioning error of the grating scale has been decreased by 90% and the residual error is less than 1.5 μm/m. The positioning accuracy of the grating scale is significant improved.

Key words: Key words： large machine tools, thermally induced positioning error of grating scale, temperature integral method, error compensation

中图分类号:

TH 161

冯文龙，黄奕乔，拓占宇，李慧敏，杨建国. 基于温度积分方法的大型数控机床光栅定位热误差建模及实时补偿[J]. 上海交通大学学报（自然版）, 2016, 50(05): 710-715.

FENG Wenlong,HUANG Yiqiao,TUO Zhanyu,LI Huimin,YANG Jianguo. Modeling of Thermally Induced Grating Positioning Error of Large Machine Tools Based on Temperature Integral Method [J]. Journal of Shanghai Jiaotong University, 2016, 50(05): 710-715.

参考文献

［1］RAMESH R, MANNAN M A, POO A N. Error compensation in machine toolsa review Part I: geometric, cuttingforce induced and fixturedependent errors［J］. International Journal of Machine Tools and Manufacture, 2000, 40(9)：12351256. ［2］王维, 杨建国. 基于插值算法的数控机床复合误差补偿技术［J］. 上海交通大学学报, 2014,48(1): 1215. WANG Wei, YANG Jianguo. Compound error compensation technique for CNC machine tools based on interpolation method［J］. Journal of Shanghai Jiaotong University, 2014,48(1): 1215. ［3］LI Z, FAN K, YANG J, et al. Timevarying positioning error modeling and compensation for ball screw systems based on simulation and experimental analysis［J］. International Journal of Advanced Manufacturing Technology, 2014, 73:773782. ［4］XU Z Z, LIU X J, KIM H K, et al. Thermal error forecast and performance evaluation for an aircooling ball screw system［J］. International Journal of Machine Tools and Manufacture, 2011,51(7/8): 605611.［5］FAN Kaiguo, YANG Jianguo, YANG Liyan. Orthogonal polynomialsbased thermally induced spindle and geometric error modeling and compensation［J］. The International Journal of Advanced Manufacturing Technology,2013,65(9): 17911800. ［6］WANG Wei, ZHANG Yi, YANG Jianguo, et al. Geometric and thermal error compensation for CNC milling machines based on Newton interpolation method［J］. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013, 227(4): 771778. ［7］FENG Wenlang, LI Zihan, GU Qunying, et al. Thermally induced positioning error modelling and compensation based on thermal characteristic analysis［J］. International Journal of Machine Tools and Manufacture, 2015,93: 2636. ［8］陈彦君, 马喜权, 耿海洋. 用激光干涉仪恢复数控机床的定位精度［J］. 制造技术与机床, 2013(8): 139141+152. CHEN Yanjun, MA Xiquan, GENG Haiyang. Using laser interferometer to resume positioning accuracy of CNC machine［J］. Manufacturing Technology & Machine Tool, 2013(8): 139141+152. ［9］涂雪飞, 易传云, 钟瑞龄, 等, 基于光栅尺的数控机床定位精度和重复定位精度检测［J］. 机械与电子, 2012(4): 3234. XU Xuefei, YI Chuanyun, ZHONG Ruiling, et al. Test of positioning accuracy and repeated positioning accuracy of CNC machine tool based on grating［J］. Machinery & Electronics, 2012(4): 3234. ［10］FENG W L, YAO X D, AZAMAT A, et al. Straightness error compensation for large CNC gantry type milling centers based on Bspline curves modeling［J］. International Journal of Machine Tools and Manufacture, 2015,88:165174. ［11］Intemational Organization for Standardization. ISO2302. Test code for machine toolspart 2：Determination of accuracy and repeatability of positioning numerically controlled axes［S］. Geneva, Switzerland: ISO copyright office, 2006. ［12］Intemational Organization for Standardization. ISO2303. Test code for machine toolspart 3：Determination of thermal effects［S］. Geneva, Switzerland: ISO copyright office, 2007. ［13］SHEN Hongyao, FU Jianzhong, HE Yong, et al. Online asynchronous compensation methods for static/quasistatic error implemented on CNC machine tools［J］. International Journal of Machine Tools and Manufacture,2012,60: 1426.

[1]	牛牧, 许黎明, 赵达, 范帆. 基于工件轮廓图像的砂轮磨损在线检测方法[J]. 上海交通大学学报, 2021, 55(3): 221-228.
[2]	陶正瑞, 党嘉强, 徐锦泱, 安庆龙, 陈明, 王力, 任斐. 基于支持向量机回归的曲面零件涡流测距标定方法[J]. 上海交通大学学报, 2020, 54(7): 674-681.
[3]	胡一星，许黎明，范帆，张哲. 曲线磨削砂轮廓形的原位视觉检测和误差补偿[J]. 上海交通大学学报, 2019, 53(6): 654-659.
[4]	荆旭1，邱世广1，范秀敏1,2，何其昌1,2. 基于关节自由度约束的上臂轴旋转跟踪误差补偿[J]. 上海交通大学学报（自然版）, 2014, 48(12): 1667-1674.
[5]	王维，杨建国. 基于插值算法的数控机床复合误差补偿技术[J]. 上海交通大学学报（自然版）, 2014, 48(1): 12-21.
[6]	许建国，张志利，周召发. 交互式地图匹配算法在组合导航中的应用[J]. 上海交通大学学报（自然版）, 2013, 47(08): 1323-1328.
[7]	李冬冬1, 2, 查体建1, 许明明1, 胡德金1, 许黎明1. 传统展成式球面磨削中球面形状误差分析与补偿 [J]. 上海交通大学学报（自然版）, 2012, 46(07): 1011-1014.
[8]	张毅,杨建国. 基于灰色神经网络的机床热误差建模[J]. 上海交通大学学报（自然版）, 2011, 45(11): 1581-1586.
[9]	李冬冬，许明明，侯海云,胡德金,许黎明. 高硬度球面磨削中球面形状误差分析与补偿[J]. 上海交通大学学报（自然版）, 2011, 45(11): 1690-1694.
[10]	蔡念, 张海员, 张楠. 基于Contourlet的改进加权抛物线插值图像超分辨率算法[J]. 上海交通大学学报（自然版）, 2011, 45(10): 1509-1515.
[11]	叶萍，张炎华，翟传润，战兴群. 磁干扰误差补偿算法在舰船及水下航向测量技术中的应用 [J]. 上海交通大学学报（自然版）, 2010, 44(09): 1297-1301.
[12]	许开州，魏臣隽，胡德金. 展成法球面磨床的几何误差补偿[J]. 上海交通大学学报（自然版）, 2010, 44(04): 478-0483.