基于一维梁理论模型的金属单搭粘接贴片接头强度分析

摘要/Abstract

摘要：

摘要：为了提高单搭粘接接头的强度，基于Goland和Reissner的一维梁理论模型，设计了单搭粘接贴片接头；对铝合金5052(AA5052)单搭粘接接头、AA5052单搭粘接贴铝片接头和AA5052单搭粘接贴铜片接头进行了拉伸剪切试验，并通过有限元数值模拟获得3种接头破坏位置附近胶层的应力分布情况.结果表明：随着搭接端部刚度的增大，单搭粘接接头的强度逐渐增大，胶层中间部分的应力变化逐渐趋于平缓；与AA5052单搭粘接接头相比，AA5052单搭粘接贴铝片接头的强度提高了3.8%，AA5052单搭粘接贴铜片接头的强度提高了4.9%，从而验证了采用单搭粘接贴片接头的方法具有较好的可行性和有效性.

关键词: 金属, 单搭粘接, 贴片接头, 一维梁理论模型, 刚度, 剥离效应

Abstract:

Abstract： In order to enhance the strength of adhesive bonding of single lap joints (SLJs), the adhesive bonding of SLJ with reinforcements was designed based on Goland and Reissner’s onedimensional beam theory model. The adhesive bonding of SLJs whose adherends were aluminum alloy 5052 (Al5052), Al5052 with pasting aluminum and Al5052 with pasting copper were separately tested under tensionshear loading, and stress distributions were acquired by means of finite element analysis. The results show that the strength of joints and the state of stress in the adhesive layer are influenced by the stiffness at the end of the overlap region. The strength of adhesive bonding of SLJ whose adherend is Al5052 with pasting copper is stronger than that of other kinds of joints. The feasibility and validity of adhesive bonding of SLJ with reinforcements are verified by these analysis results.
Key words：

Key words: metal, single lap adhesive, single lap joints, onedimensional beam theory model, rigidity, peeling effect

中图分类号:

王玉奇，何晓聪，丁燕芳，邢保英. 基于一维梁理论模型的金属单搭粘接贴片接头强度分析[J]. 上海交通大学学报（自然版）, 2015, 49(01): 49-55.

WANG Yuqi,HE Xiaocong,DING Yanfang,XING Baoying. Analysis of Strength of Adhesive Bonding of Single Lap Joints of Metal with Reinforcements Based on OneDimensional Beam Theory[J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 49-55.

参考文献

［1］He X C, Gu F S, Ball A. A review of numerical analysis of friction stir welding［J］. Progress in Materials Science, 2014, 65:166.

［2］He X C. A review of finite element analysis of adhesively bonded joints［J］. International Journal of Adhesion and Adhesives, 2011, 31(4): 248264.

［3］史冬岩，王青山，石先杰, 等. 任意边界条件下正交各向异性薄板自由振动特性分析［J］. 上海交通大学学报, 2014,48(3): 434438, 444.

SHI Dongyan, WANG Qingshan, SHI Xianjie, et al. Free vibration analysis of orthotropic thin plates in general boundary conditions［J］. Journal of Shanghai Jiaotong University, 2014, 48(3): 434438,444.

［4］Kumar V R L, Bhat M R, Murthy C R L. Analysis of composite single lap joints using numerical and experimental approach［J］. Journal of Adhesion Science and Technology, 2014, 28(10): 893914.

［5］Moradi A, Leguillon D, Carrère N. Influence of the adhesive thickness on a debonding—An asymptotic model［J］. Engineering Fracture Mechanics, 2013, 114: 5568.

［6］Teutenberg D, Hahn O. Predicting production influences on adhesively bonded joints subjected to cyclic load［J］. Welding in the World, 2013, 57(2): 203213.

［7］Sugiman S, Crocombe A D, Aschroft I A. Modelling the static response of unaged adhesively bonded structures［J］. Engineering Fracture Mechanics, 2013, 98: 296314.

［8］李龙, 胡平, 刘立忠.不同胶层厚度单搭接接头剪切试验与强度预测［J］. 农业机械学报，2010, 41(12):1721.

LI Long, HU Ping, LIU Lizhong. Strength of adhesively bonded single lap for differential bondline thickness and tension loading prediction［J］. Transactions of the Chinese Society for Agricultural Machinery, 2010, 41(12):1721.

［9］王玉奇，何晓聪，刘福龙, 等.奇异性法预测粘接厚度对单搭粘接接头失效的影响［J］. 力学季刊，2014, 35(2):341349.

WANG Yuqi, HE Xiaocong, LIU Fulong, et al. A stress singularity approach to predict initiate failure of single lap joints with varying bondline thickness［J］. Chinese Quarterly of Mechanics, 2014, 35(2):341349.

［10］严沾谋, 游敏, 郑小玲, 等.胶粘剂弹性模量对间隙接头应力和强度的影响［J］. 航空学报，2007, 289(1): 253256.

YAN Zhanmou, YOU Min, ZHENG Xiaoling, et al. Influence of elastic modulus of adhesive on the stress and strength of joint with recessing［J］. Acta Aeronautica Et Astronautica Sinica, 2007, 28(1): 253256.

［11］李龙, 胡平, 刘立忠. 刚度不平衡单搭接粘接接头剪切试验与强度分析［J］. 农业机械学报, 2011, 42(1): 213217.

LI Long, HU Ping, LIU Lizhong. Strength of unsymmetric singlelap adhesively bonded joints［J］. Transactions of the Chinese Society for Agricultural Machinery, 2011, 42(1): 213217.

［12］You M, Li Z, Zheng X L, et al. A numerical and experimental study of preformed angle in the lap zone on adhesively bonded steel single lap joint［J］. International Journal of Adhesion and Adhesives, 2009, 29(3): 280285.

［13］Haghani R, AlEmrani M, Kliger R. Stress distribution in adhesive joints with tapered laminates—Effect of tapering length and material properties［J］. Journal of Composite Materials, 2010, 44(3): 287302.

［14］Fessel G, Broughton J G, Fellows N A, et al. Evaluation of different lapshear joint geometries for automotive applications［J］. International Journal of Adhesion and Adhesives, 2007, 27(7): 574583.

［15］Pereira A M, Ferreira J M, Antunes F V, et al. Analysis of manufacturing parameters on the shear strength of aluminium adhesive singlelap joints［J］. Journal of Materials Processing Technology, 2010, 210(4): 610617.

［16］He X C, Ichikawa M. Effect of thickness control of adhesive layer on strength of adhesive joints［C］//Proceeding of 70th JSME Spring Annual Meeting. Tokyo, Japan: JSME, 1993:490491.

［17］Goland M, Reissner E. The stresses in cemented joints［J］. Journal of Applied Mechanics of ASME, 1944, 11(1): 1727.

［18］Wu Z J, Romeijin A, Wardenier J. Stress expressions of singlelap adhesive joints of dissimilar adherends［J］. Composite Structure, 1997, 38(4): 273280.

[1]	刘庆升, 薛鸿祥, 袁昱超, 唐文勇. 含复合材料结构的非黏结柔性立管弯曲特性[J]. 上海交通大学学报, 2022, 56(9): 1247-1255.
[2]	张源, 李范春, 贾德君. 点阵压气机叶轮的设计与3D打印仿真[J]. 上海交通大学学报, 2021, 55(6): 729-740.
[3]	谢肖礼, 庞木林, 邱辰, 覃石生. 上承式加V拱桥动力特性研究及试验验证[J]. 上海交通大学学报, 2021, 55(3): 276-289.
[4]	张聪, 贾德君, 李范春, 徐一通, 张源. 面向3D打印的钛合金点阵接骨板设计及其仿真[J]. 上海交通大学学报, 2021, 55(2): 170-178.
[5]	厉天威, 刘磊, 陈坚. 考虑雷电流参数概率分布的雷击金属损伤估算方法[J]. 上海交通大学学报, 2020, 54(12): 1252-1258.
[6]	胡安峰, 南博文, 陈缘, 付鹏. 基于砂土刚度衰减模型的修正p-y曲线法[J]. 上海交通大学学报, 2020, 54(12): 1316-1323.
[7]	胡安峰，肖志荣，江进华，付鹏，南博文. 双向循环荷载下的单桩基础累积侧向位移[J]. 上海交通大学学报, 2020, 54(1): 85-91.
[8]	张威，敖三三，罗震，郝志壮，陈瑶，冯梦楠，解龑. 焊接能量对铝镍超声波焊接接头性能的影响[J]. 上海交通大学学报, 2019, 53(9): 1130-1135.
[9]	杨德庆,秦浩星. 基于功能基元拓扑优化法的任意正泊松比超材料结构设计[J]. 上海交通大学学报, 2019, 53(7): 819-829.
[10]	孔谅，凌展翔，王泽，王敏，潘华，雷鸣. 镀锌Q&P980钢电阻点焊接头液态金属脆裂纹的形态及分布[J]. 上海交通大学学报, 2019, 53(6): 704-707.
[11]	茅梦云,彭林法,来新民. 不同晶粒的纯铜表面划痕实验研究[J]. 上海交通大学学报（自然版）, 2019, 53(3): 253-259.
[12]	刘昺轶，张继革，王德忠，李斌. 屏蔽式核主泵飞轮裂纹寿命评估[J]. 上海交通大学学报（自然版）, 2019, 53(3): 315-320.
[13]	潘鹤斌, 宋波涛, 王皓. 基于优化法的飞行器复杂结构连接面刚度参数辨识[J]. 空天防御, 2019, 2(2): 1-4.
[14]	张义福,张华,朱政强,苏展展. 沉积路径对激光增材制造结构件残余应力的影响[J]. 上海交通大学学报, 2019, 53(12): 1488-1494.
[15]	李雪龙，于忠奇，赵亦希，EVSYUKOV S A. 多道次普旋预成形阶段法兰起皱预测[J]. 上海交通大学学报, 2019, 53(11): 1375-1380.