上海交通大学学报(自然版) ›› 2014, Vol. 48 ›› Issue (11): 1644-1649.

• 原子能技术 • 上一篇    下一篇

溶解氧对高温水中冷变形316L应力腐蚀开裂的影响规律

杜东海1,陆辉1,陈凯1,张乐福1,石秀强2,徐雪莲2   

  1. (1. 上海交通大学 机械与动力工程学院,上海 200240;2. 上海市核电工程重点实验室,上海 200233)
  • 收稿日期:2014-04-30
  • 基金资助:

    大型先进压水堆核电站重大专项子项目资助(2011ZX0600400908)

SCC Crack Growth Rate Dependence of Cold Worked 316L Stainless Steel on Dissolved Oxygen in High Temperature Water

DU Donghai1,LU Hui1,CHEN Kai1,ZHANG Lefu1,SHI Xiuqiang2,XU Xuelian2   

  1. (1. School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China;2. Shanghai Key Laboratory for Nuclear Power Engineering, Shanghai 200233, China)
  • Received:2014-04-30

摘要:

摘要:  为研究冷变形不锈钢材料在不同溶解氧含量时的开裂规律,使用经冷弯变形的管道316L不锈钢在模拟压水堆一回路温度和压力的条件下进行实验.使用直流电压降法,原位在线测量材料在水中不同含氧量下的裂纹扩展速率.实验结果:材料的裂纹扩展速率随溶解氧含量的升高而升高.在含氧量小于0.2 mg/L时这种变化趋势非常的显著,而当超过该值后,这种变化趋势变得缓慢.对这一现象产生的原因进行了分析.

关键词: 316L不锈钢, 高温高压, 溶解氧, 应力腐蚀, 裂纹扩展速率

Abstract:

Abstract: The cold bent 316L pipe was used to study the dependence of crack growth rate on dissolved oxygen in simulated temperature and pressure of primary side water environment. The crack growth rates were measured insitu realtime using the direct current potential drop method. Experimental results indicate that the crack growth rates increase with the increase of dissolved oxygen. When the oxygen content is less than 0.2 mg/L, the increase of the crack growth rate is very significant, while above this value, it becomes unconspicuous. This result was compared with those of other researchers’ and possible reasons were analyzed.

Key words: 316L stainless steel; high temperature and high pressure, dissolved oxygen (DO);stress corrosion cracking (SCC), crack growth rate (CGR)

中图分类号: