低温热能有机物朗肯循环发电系统的最佳负载特性实验研究

摘要/Abstract

摘要：

针对低温热能的回收利用，搭建了采用涡旋膨胀机的有机物朗肯循环发电实验系统，以异丁烷为工质，研究了热源温度和负载对小型有机物朗肯循环发电系统性能的影响.结果表明：在不同的热源温度和工质流量条件下，都存在一个最佳负载电阻，使得系统具有最大的发电功率、比发电功率和发电效率；在设计发电系统时，应为涡旋膨胀机匹配合适的永磁发电机和负载电阻，以使系统发挥最优性能；当热源温度不超过120 ℃时，系统的最大发电功率为1.05 kW，最高发电效率为4.51%，膨胀机的最大转速和膨胀比分别可达2 922 r/min和3.03.

关键词: , 低温热能, 有机物朗肯循环, 涡旋膨胀机, 负载电阻, 匹配

Abstract:

The experimental study of the small organic Ranine cycle (ORC) power system performance under different heat resource temperature and different load resistance was conducted. The organic Rankine cycle power generation experimental system was built using scroll expander with the working fluid R600a utilizing low temperature heat. The results show that when the heat source temperature does not exceed 120 ℃, the experimental system has a maximum generating power of 1.05 kW and power generation efficiency of up to 4.51%, the scroll expander rotation speed and expansion ratio can reach 2 922 r/min and 3.03, respectively; There exists an optimum load resistance value which makes the power generation, unit power output and power generation efficiency ratio maximum under different heat temperatures and different working fluid mass flow rates. The scroll expander should match permanent magnet generator and the load when designing power systems so that the system can get the best performance.

Key words: low temperature heat, organic Ranine cycle (ORC), scroll expander, load resistance, match

中图分类号:

TK 17

汤磊，王羽平，杨平，翁一武. 低温热能有机物朗肯循环发电系统的最佳负载特性实验研究[J]. 上海交通大学学报（自然版）, 2014, 48(09): 1268-1273.

TANG Lei，WANG Yuping，YANG Ping，WENG Yiwu. Experimental Study of Optimal Load Characteristics of Low Temperature Heat Organic Ranine Cycle Power Generation[J]. Journal of Shanghai Jiaotong University, 2014, 48(09): 1268-1273.

参考文献

［1］Gu W, Weng Y, Wang Y, et al．Theoretical and experimental investigation of an organic Rankine cycle for a waste heat recovery system ［J］．Journal of Power and Energy， 2009， 223(5)： 523533．

［2］顾伟，孙绍芹，翁一武，等．采用涡旋膨胀机的低品位热能有机物朗肯循环发电系统实验研究［J］．中国电机工程学报， 2011， 31(7)： 2025.

GU Wei， SUN Shaoqin， WENG Yiwu， et al．Experimental study on low grade heat driven organic rankine cycle by scroll expander ［J］. Proceeding of the CSEE, 2011， 31(7): 2025．

［3］Mathias J A， Johnston J R， Cao J M， et al．Experimental testing of gerotor and scroll expanders used in，and energetic and exergetic modeling of an organic rankine cycle［J］．Journal of Energy Resources Technology， 2009， 131(1)： 19．

［4］Peterson R B， Wang H， Herron T．Performance of a smallscale regenerative Rankine power cycle employing a scroll expander［J］．Journal of Power and Energy， 2008， 222(3)： 271282．

［5］Quoilin S, Lemort V, Lebrun J. Experimental study and modeling of an organic rankine cycle using scroll expander ［J］. Applied Energy, 2010, 87(4): 12601268．

［6］Li M G, Wang J F, He W F, et al．Construction and preliminary test of a lowtemperature regenerative organicrankine cycle (ORC) using R123［J］. Renewable Energy， 2013, 57： 216212．

［7］Kang S H．Design and experimental study of ORC (organic Rankine cycle) and radial turbine using R245fa working fluid［J］. Energy, 2012, 41(1): 514524．

［8］Pei G, Li J, Li Y Z, et al．Construction and dynamic test of a smallscale organic rankine cycle ［J］. Energy， 2011， 36(5)： 32153223．

［9］Pan W G, Ren J X, Li Y G．Experimental study of a novel heat pipetype photovoltaic/thermal system ［J］．Advanced Materials Research, 2012, 347353: 403408．

［10］Li J, Pei G, Li Y, et al．Examination of the expander leaving loss in variable organic Rankine cycle operation ［J］． Energy Conversion and Management，2013, 65： 6674．

［11］Gao P, Zhao L. Theoretical and experimental investigation on component’ proportion of zeotropic mixtures based on relation betweentemperature and enthalpy during phase change ［J］. Energy Conversion and Management， 2008， 49(6)： 15671573．

［12］王世峰. 风轮、发电机与负载的匹配性研究［D］．呼和浩特:内蒙古工业大学能源与动力工程学院, 2007．

（上接第1267页）

［8］匡震邦. 非线性连续介质力学［M］. 上海:上海交通大学出版社, 2002: 179185.

［9］Gao Z, Lister K, Desai J P. Constitutive modelling of liver tissue: Experiment and theory ［J］. Annals of Biomedical Engineering, 2010, 38(2): 505516.

［10］Toms S R, Eberhardt A W. A nonlinear finite element analysis of the periodontal ligament under orthodontic tooth loading ［J］. American Journal of Orthodontics and Dentofacial Orthopedics, 2003, 123(6): 657665.

［11］Toms S R, Dakin G J, Lemons J E, et al. Quasilinear viscoelastic behavior of the human periodontal ligament ［J］. Journal of Biomechanics, 2002, 35 (10):14111415.

［12］黄辉祥, 汤文成, 吴斌, 等. 基于超弹性模型的牙周膜生物力学响应［J］.东南大学学报:自然科学版, 2013, 43(2): 340344.

HUANG Huixiang, TANG Wencheng, WU Bin, et al. Biomechanical response for periodontal ligament based on hyperelastic model ［J］. Journal of Southeast University: Natural Science Edition, 2013, 43(2): 340344.第48卷第9期2014年9月上海交通大学学报JOURNAL OF SHANGHAI JIAO TONG UNIVERSITYVol.48 No.9Sep. 2014

编辑推荐 0

Metrics

阅读次数

全文

189

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	0	0	189

	来源	其他网站

	次数	189
	比例	100%

摘要

142

最新录用	在线预览	正式出版

0	0	142

	来源	其他网站

	次数	142
	比例	100%

[1]	李林晏, 韩爽, 乔延辉, 李莉, 刘永前, 阎洁, 刘海东. 面向高比例新能源并网场景的风光-电动车协同调度方法[J]. 上海交通大学学报, 2022, 56(5): 554-563.
[2]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[3]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[4]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[5]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[6]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[7]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[8]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[9]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[10]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[11]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[12]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[13]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[14]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[15]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.