髋关节假体脱位与日常行为动作关系

上海交通大学学报（自然版） ›› 2012, Vol. 46 ›› Issue (11): 1857-1861.

髋关节假体脱位与日常行为动作关系

周海, 季文婷, 曾祥森, 韦山, 王成焘

(上海交通大学机械与动力工程学院，上海 200240)

收稿日期:2012-06-26 出版日期:2012-11-30 发布日期:2012-11-30
基金资助:
国家自然科学基金资助（30810103908），上海市科学技术委员会基金（09441900300）资助项目

Research on the Relationship Between Dislocation After Total Hip Replacement and the Action of Daily Living

ZHOU Hai, JI Wen-Ting, ZENG Xiang-Sen, WEI Shan, WANG Cheng-Tao

(School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Received:2012-06-26 Online:2012-11-30 Published:2012-11-30

摘要/Abstract

摘要： 以髋关节置换术后常见的脱位失效为研究对象，在Adams运动学分析软件环境下，设计并开发了可视化髋关节假体运动分析模块.该模块能够构建不同设计参数的髋关节假体模型，模拟各种行为条件下的髋关节运动，检测关节假体的活动范围.利用光学运动捕捉系统对正常人群进行日常行为的下肢运动学测量.将模块对假体的运动学分析结果与实验测量的天然关节的运动数据对比，研究并发现了髋关节假体的脱位与行为运动的关系，结果显示术后的高屈曲动作脱位风险较大，尤其是下蹲动作.

关键词: 髋关节假体, 脱位, 行为动作, 碰撞

Abstract: Taking the common dislocation failure after total hip arthroplasty as research object, the visual motion analysis module of hip prosthesis based on Adams was designed and developed. This module can construct the hip prosthesis model with different design parameters, simulate motions for various behavior condition, and acquire motion range of hip prosthesis. The kinematics data of the lower limbs during action of daily living was obtained by using the optical motion capture system. Comparing the theoretical motion data obtained by module and the experimental kinematics data of the natural joint, this paper studied the relationship between the dislocation of the hip prosthesis and the action of daily living. The results unveil that it is of high risk performing high flexion activities, especially squatting activity. The research results would be helpful for clinical rehabilitation, prosthesis design and optimization.

Key words: hip prosthesis, dislocation, activities, impingement

中图分类号:

R 318.01

周海, 季文婷, 曾祥森, 韦山, 王成焘. 髋关节假体脱位与日常行为动作关系[J]. 上海交通大学学报（自然版）, 2012, 46(11): 1857-1861.

ZHOU Hai, JI Wen-Ting, ZENG Xiang-Sen, WEI Shan, WANG Cheng-Tao. Research on the Relationship Between Dislocation After Total Hip Replacement and the Action of Daily Living [J]. Journal of Shanghai Jiaotong University, 2012, 46(11): 1857-1861.

参考文献

［1］McCollum D E, Gray W J. Dislocation after total hip arthroplasty: Causes and prevention［J］. Clinical Orthopaedics and Related Research, 1990, 261(12):159170.
［2］Morrey B F. Instability after total hip arthroplasty［J］. Orthopedic Clinics of North America, 1992, 23: 237248.
［3］Woo R Y G, Morrey B F. Dislocations after total hip arthroplasty［J］. Journal of Bone and Joint SurgeryAmerican Volume, 1982, 64(9): 12951306.
［4］Canadian Joint Replacement Registry (CJRR). Hip and knee replacements in Canada 2008-2009 annual report［EB/OL］. ［20120626］. http://secure.cihi.ca/cihiweb/products/2008_cjrr_annual_report_en.pdf.
［5］New Zealand Orthopaedic Association, the New Zealand Joint Registry. Eleven year report january 1999 to december 2009［EB/OL］. ［20120626］. http://www.cdhb.govt.nz/njr/reports/A2D65CA3.pdf.
［6］The Norwegian Arthroplasty Register, The Norwegian Cruciate Ligament Register, The Norwegian Hip Fracture Register, Centre of excellence of Joint Replacements. Report June 2010［EB/OL］. ［20120626］. http://nrlweb.ihelse.net/eng/Report_2010.pdf.
［7］Yoshimine F. The influence of the oscillation angle and the neck anteversion of the prosthesis on the cup safezone that fulfills the criteria for range of motion in total hip replacements. The required oscillation angle for an acceptable cup safezone［J］. Journal of Biomechanics, 2005, 38(1): 125132.
［8］Yoshimine F. The safezones for combined cup and neck anteversions that fulfill the essential range of motion and their optimum combination in total hip replacements［J］. Journal of Biomechanics, 2006, 39(7): 13151323.
［9］Widmer K H, Zurfluh B. Compliant positioning of total hip components for optimal range of motion［J］. Clinical Orthopaedics and Related Research, 2004, 22 (4): 815821.
［10］Widmer K H. Comment on “A mathematical formula to calculate the theoretical range of motion for total hip arthroplasty” ［J］. Journal of Biomechanics, 2003, 36(4): 615.
［11］Mills P M, Morrison S, Lloyd D G, et al. Repeatability of 3D gait kinematics obtained from an electromagnetic tracking system during treadmill locomotion［J］. Journal of Biomechanics, 2007, 40(2): 15041511.
［12］Widmer K H, Majewski M. The impact of the CCDangle on range of motion and cup positioning in total hip arthroplasty［J］. Clinical Biomechanics, 2005, 20(7): 723728.
［13］Padgett D E, Lipman J, Robie B, et al. Influence of total hip design on dislocation: A computer model and clinical analysis［J］. Clinical Orthopaedics and Related Research, 2006, 447: 4852.
［14］Ji W T, Tao K, Wang C T. A threedimensional parameterized and visually kinematic simulation module for the theoretical range of motion of total hip arthroplasty［J］. Clinical Biomechanics, 2010, 25(5): 427432.
［15］王成焘. 中国力学虚拟人［J］. 医用生物力学, 2006, 21(3): 172178.
WANG Chengtao. Mechanical virtual human of China［J］. Journal of Medical Biomechanics, 2006, 21(3): 172178．

[1]	王屹. 单点吊装作业视景仿真应用研究[J]. 海洋工程装备与技术, 2022, 9(2): 38-42.
[2]	孙鸿强, 张占月, 方宇强. 基于NSGA-II算法的编队卫星重构策略[J]. 上海交通大学学报, 2021, 55(3): 320-330.
[3]	黄福祥, 李隶辉, 阴炳钢, 刘国锋, 陈金铭. FPSO舷侧立管碰撞损伤与风险研究[J]. 海洋工程装备与技术, 2019, 6(2): 487-493.
[4]	张东明, 张晓云, 杨小波, 侯心一. 基于正交实验和多项式回归分析方法的非典型接触状态车人碰撞事故参数分析[J]. 上海交通大学学报, 2019, 53(1): 55-61.
[5]	徐峰, 阮胜福, 胡永明, 靳宝旺, 田维兴. 一种导管架与水下导向桩对接的计算方法[J]. 海洋工程装备与技术, 2018, 5(3): 191-196.
[6]	吴长征1，岳义1,2，韦宝琛1，刘殿富3. 双臂机器人自碰撞检测及其运动规划[J]. 上海交通大学学报（自然版）, 2018, 52(1): 45-53.
[7]	尹金鸽1，孔维梁1，王福新1，刘洪1，杨坤2. 过冷水滴碰撞过程的实验研究[J]. 上海交通大学学报（自然版）, 2017, 51(8): 939-945.
[8]	胡永利, 尹汉军, 王盛炜, 姚宝恒, 连琏. 一种新型水下升降装置着底碰撞动力响应分析[J]. 上海交通大学学报, 2016, 50(03): 456-459.
[9]	鲍义东1,2，吴冬梅1. 自适应细分及优化编码八叉树碰撞检测算法[J]. 上海交通大学学报（自然版）, 2015, 49(08): 1114-1122.
[10]	王鑫1，贾庆轩1，高欣1，陈钢1，赵兵2. 基于位图构建的RFID自适应N树防碰撞算法[J]. 上海交通大学学报（自然版）, 2015, 49(02): 150-157.
[11]	章斯亮1，朱平1，陈卫1,2. 基于两种不确定的稳健设计方法及其在车身轻量化设计中的应用[J]. 上海交通大学学报（自然版）, 2013, 47(05): 834-839.
[12]	印桂生1, 王海玲1, 2, 张菁1, 倪军2, 王建3. 快速高效的碰撞检测算法 [J]. 上海交通大学学报（自然版）, 2012, 46(06): 962-966.
[13]	邹凡, 刘锦阳, 余征跃. 柔性体碰撞阻尼模型的适用性分析[J]. 上海交通大学学报（自然版）, 2011, 45(10): 1444-1449.
[14]	刘忠, 曹其新, 朱笑笑, 王雯珊. 基于VRML节点树的双臂移动机器人碰撞检测及优化[J]. 上海交通大学学报（自然版）, 2011, 45(07): 985-989.
[15]	张勇，李光耀. 基于序列响应面方法的汽车板选材优化设计[J]. 上海交通大学学报（自然版）, 2010, 44(01): 62-0067.