上海交通大学学报(自然版) ›› 2012, Vol. 46 ›› Issue (11): 1746-1752.
谢志强1, 2, 刘长海1, 杨静2
收稿日期:
2012-03-02
出版日期:
2012-11-30
发布日期:
2012-11-30
基金资助:
国家自然科学基金资助项目(60873019,61073043),黑龙江省自然科学基金资助项目(F200901,F201101),中国博士后科学基金资助项目(20090460880),哈尔滨市优秀学科带头人项目(2010RFXXG054,2011RFXXG015)
XIE Zhi-Qiang-1, 2 , LIU Chang-Hai-1, YANG Jing-2
Received:
2012-03-02
Online:
2012-11-30
Published:
2012-11-30
摘要: 提出了考虑后续工序且批处理工序数为2的批综合调度算法.该算法根据复杂产品具有树状工艺结构的特点,对非批处理设备上的工序采用已有的优先级、调度长路径和长用时策略调度;对批处理设备上的工序,综合考虑先行工序和后续工序的加工时间对批处理的影响,当被等待工序非批处理延迟时间大于批处理时批处理工序的后续工序加工时间之差时,等待工序与被等待工序一同批处理.通过采用批处理判断策略、提前最大化策略以及并行最大化策略使批处理调度结果更合理.理论分析和实例证明,该算法可使批处理工序数为2的批综合调度结果更优,而且复杂度不超过二次多项式.
中图分类号:
谢志强1, 2, 刘长海1, 杨静2. 考虑后续工序且批处理工序数为2的批综合调度算法[J]. 上海交通大学学报(自然版), 2012, 46(11): 1746-1752.
XIE Zhi-Qiang-1, 2 , LIU Chang-Hai-1, YANG Jing-2. Batch Integrated Scheduling Algorithm Considering Posterior Operations and with Constraint of 2 Operations Batches Processing[J]. Journal of Shanghai Jiaotong University, 2012, 46(11): 1746-1752.
[1]Ikura Y, Gimple M. Scheduling algorithms for a single batch processing machine [J]. Operations Research Letters, 1986, 5(1): 6165.[2]赵玉芳,唐立新. 极小化总完工时间的单机连续型批调度问题[J]. 电子学报, 2008, 36(2): 367370.ZHAO Yufang, TANG Lixin. Scheduling a single continuous batch processing machine to minimize total completion time[J]. Acta Electronica Sinica, 2008, 36(2): 367370.[3]Ng C T,Cheng T C E,Yuan J J, et al. On the single machine serial batching scheduling problem to minimize total completion time with precedence constraints, release dates and identical processing times[J]. Operations Research Letters, 2003, 31(2): 323326.[4]Coffman E G Jr, Yannakakis M, Magazine M J, et al. Batch sizing and job sequencing on a single machine [J]. Annals of Operations Research, 1990, 26(2): 135147.[5]Brucker P, Gladky A, Hoogeveen H, et al. Scheduling a batching machine[J]. Journal of Scheduling,1998, 1(1): 3154.[6]薛耀锋, 袁景淇. 基于预排序的并行批处理过程调度模型[J]. 上海交通大学学报, 2007, 41(8): 13301333.XUE Yaofeng, YUAN Jingqi. A scheduling model of parallel batch process based on preordering[J]. Journal of Shanghai Jiaotong university, 2007, 41(8): 13301333.[7]谢志强. 工件间有约束的复杂产品工序调度研究[D]. 哈尔滨:哈尔滨理工大学机械动力工程学院, 2009.[8]谢志强, 王悦, 杨静. 存在批量为2的批处理设备的综合调度算法[J]. 北京工业大学学报, 2011, 37(10): 14711478.XIE Zhiqiang, WANG Yue, YANG Jing. Integrated scheduling algorithm with batch processing machines with the lotsize being two[J]. Journal of Beijing University of Technology, 2011, 37(10): 14711478.[9]谢志强, 张磊, 杨静. 基于调度长路径的复杂产品综合调度算法[J]. 计算机科学, 2010, 37(2): 150153.XIE Zhiqiang, ZHANG Lei, YANG Jing. Integrated scheduling algorithm of complex product based on scheduling longpath[J]. Computer Science, 2010, 37(2): 150153.[10]谢志强, 杨静, 杨光, 等. 可动态生成具有优先级工序集的动态JobShop调度算法[J]. 计算机学报, 2008, 31(3): 502508.XIE Zhiqiang, YANG Jing, YANG Guang, et al. Dynamic jobshop scheduling algorithm with dynamic set of operation having priority[J]. Chinese Journal of Computers, 2008, 31(3): 502508.[11]熊禾根, 李建军, 孔建益, 等. 考虑工序相关性的动态Job Shop调度问题启发式算法[J]. 机械工程学报, 2006, 42(8): 5055.XIONG Hegen, LI Jianjun, KONG Jianyi, et al. Heuristic method for dynamic job shop scheduling problem with operation relativity[J]. Chinese Journal of Mechanical Engineering, 2006,42(8):5055.[12]曾立平, 黄文奇. 求解JobShop调度问题的一种新的邻域搜索算法[J]. 计算机研究与发展, 2005, 42(4): 582587.ZENG Liping, HUANG Wenqi. A new local search algorithm for the job shop scheduling problem[J]. Journal of Computer Research and Development, 2005,42(4):582587. |
[1] | 王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49. |
[2] | 袁振钦, 邹 科, 孙亚峰, 刘 刚, 屈 衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55. |
[3] | 王 娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31. |
[4] | 陈 欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36. |
[5] | 尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57. |
[6] | ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481. |
[7] | MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502. |
[8] | 安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-. |
[9] | KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162. |
[10] | ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230. |
[11] | ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9. |
[12] | HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39. |
[13] | WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713. |
[14] | QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778. |
[15] | WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||