电池联接方式对燃料电池/燃气轮机混合动力系统性能影响

上海交通大学学报（自然版） ›› 2012, Vol. 46 ›› Issue (07): 1117-1121.

电池联接方式对燃料电池/燃气轮机混合动力系统性能影响

刘爱虢1,翁一武2,张玲1

（1. 沈阳航空航天大学航空航天学部，辽宁沈阳 110136;2. 上海交通大学机械与动力工程教育部重点实验室，上海 200240）

收稿日期:2011-08-22 出版日期:2012-07-30 发布日期:2012-07-30
基金资助:
国家重点基础研究发展规划（973）项目（2010CB227301）

Effect of Different cell Connection Methods on MCFC/MGT Hybrid System Performance

LIU Ai-Guo-1, WENG Yi-Wu-2, ZHANG Ling-1

(1. Faculty of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, China; 2. Key Laboratory of Machinery and Power Engineering of Education Ministry, Shanghai Jiaotong University, Shanghai 200240, China)

Received:2011-08-22 Online:2012-07-30 Published:2012-07-30

摘要/Abstract

摘要： 为了研究不同电池联接方式对混合动力系统性能的影响，应用模块化建模的方法建立了混合动力系统模型.利用该模型分析了电池的燃料和氧化剂都采用串联以及燃料串联氧化剂并联2种不同电池联接模式下燃料电池及整个混合动力系统性能的变化.将所有电池都并联的联接方式作为参考，不同联接方式的结果与参考工况进行了比较.结果表明，将电池的燃料和氧化剂都串联后电池堆可以被更好地冷却，电池堆内的温度分布更加均匀，系统的特性会有明显改善.

关键词: 熔融碳酸盐, 燃料电池, 系统性能

Abstract: The model of hybrid system was built using modular modelling method to compare the effect of different connection methods on the system performance. Characteristics of fuel cell stacks and hybrid system were compared when the fuel and oxidant are both series and series fuel and parallel oxidant. The condition that fuel and oxidant are both parallel was viewed as an example and the comparisons between different connection methods and example were completed. The results show that the fuel cell stack can be cooled better and the temperature distributions are uniform with the fuel and oxidant are both series, so the performance of whole hybrid system is better.

Key words: molten carbonate, fuel cell, system performance

中图分类号:

TM 911

刘爱虢1, 翁一武2, 张玲1. 电池联接方式对燃料电池/燃气轮机混合动力系统性能影响[J]. 上海交通大学学报（自然版）, 2012, 46(07): 1117-1121.

LIU Ai-Guo-1, WENG Yi-Wu-2, ZHANG Ling-1. Effect of Different cell Connection Methods on MCFC/MGT Hybrid System Performance[J]. Journal of Shanghai Jiaotong University, 2012, 46(07): 1117-1121.

参考文献

［1］Santangelo E, Tartarini P. Fuel cell system and traditional technologies. Part I: Experimental CHP

approach［J］. Applied Thermal Engineering, 2007, 27(89): 12781284.
［2］Kang B, Koh J H, Lim H C. Effects of system configuration and operating condition on MCFC system efficiency［J］. Journal of Power Sources, 2002, 108(12): 232238.
［3］Park S K, Kim T S. Comparison between pressurized design and ambient pressure design of hybrid solid oxide fuel cell–gas turbine systems［J］. Journal of Power Sources, 2006, 163(1): 490499.
［4］陈启梅，翁一武，翁史烈，等. 高温燃料电池与燃气轮机相结合的发电系统——混合发电系统［J］. 热能动力工程，2005, 20(2): 111115.
CHEN Qimei, WENG Yiwu, WENG Shilie, et al. A power generation system based on the combination of hightemperature fuel cells and gas turbinesa hybrid power generation system［J］. Journal of Engineering for Thermal Energy and Power, 2005, 20(2): 111115.
［5］陈启梅，翁一武，朱新坚，等. 熔融碳酸盐燃料电池燃气轮机混合动力系统特性分析［J］. 中国电机工程学报, 2007, 27(8): 9498.
CHEN Qimei, WENG Yiwu, ZHU Xinjian, et al. Performance analysis of molten carbonate fuel cell gas turbine hybrid system［J］. CSEE, 2007, 27(8): 9498.
［6］Zhang H S, Weng S L, Su M. Evaluation of topping and bottoming cycle hybrid power plants with mcfcmicro turbine［C］∥Proceedings of ASME Turbo Expo 2004. Vienna, Australia: ASME, 2004: GT53397,16.
［7］Standaert F, Hemmes K, Woudstra N. Nerst loss and multistage oxidation in fuel cells［C］//Proceedings of the Fuel cell seminar. California, USA:［s.n.］, 1998: 9295.
［8］Williams M C. Fuel cell handbook［M］. 5th ed. New York: EG&G Services Parspns Inc, 2000.
［9］Au S T, Woudstra N, Hemmes K. Study of multistage oxidation by flowsheet calculations on a combined heat and power molten carbonate fuel cell plant［J］. Journal of Power Sources, 2003, 122(1): 2836.
［10］Vivanpatarakij S, Assabumrungrat S, Laosiripojana N. Improvement of solid oxide fuel cell performance by using nonuniform potential operation［J］. Journal of Power Sources, 2007, 167(1): 139144.
［11］刘爱虢，翁一武. 不同控制方式对熔融碳酸盐燃料电池/微型燃气轮机混合动力系统运行特性的影响［J］. 中国电机工程学报, 2009, 29（35）：4147.
LIU Aiguo, WENG Yiwu. Effect of various control methods on the molten carbonate fuel cell/ microgas turbine hybrid system performances［J］. CSEE, 2009, 29(35): 4147.
［12］刘爱虢,翁一武.熔融碳酸盐燃料电池热力特性研究与实验分析［J］.上海交通大学学报，2010, 44(7):994999.
LIU Aiguo, WENG Yiwu. Study on thermodynamic characteristics and experimental analysis of molten carbonate fuel cell［J］. Journal of Shanghai Jiaotong University, 2010,44(7):994999.
［13］Azar S, Jens P. Networked solid oxide fuel cell stacks combined with a gas turbine cycle［J］. Journal of Power Sources, 2002, 106(1) :7682.
［14］Standeart F. Analytical fuel cell modeling and exergy analysis of fuel cells［D］. Delft: Delft university of technology, 1998.
［15］Liebhafsky H A, Cairns E J. Fuel cells and fuel batteries［M］. New York: Wiley, 1968.

[1]	姜勇，李洋，周阳，巩建鸣. 奥氏体不锈钢双极板的低温超饱和气体渗碳表面改性[J]. 上海交通大学学报（自然版）, 2019, 53(2): 247-252.
[2]	周苏，姜缜，DE LILE J R. 基于密度泛函理论的过渡金属酞菁配合物氧还原反应催化能力[J]. 上海交通大学学报（自然版）, 2017, 51(12): 1422-1427.
[3]	刘爱虢1，翁一武2，曾文1，陈保东1. 基于燃气轮机的MCFC/MGT混合动力系统特性[J]. 上海交通大学学报（自然版）, 2015, 49(04): 418-423.
[4]	刘爱虢1，翁一武2，陈雷1，马洪安1. 增压型MCFC/MGT混合动力系统中燃料电池的特性分析[J]. 上海交通大学学报（自然版）, 2014, 48(09): 1239-1245.
[5]	刘爱虢1，翁一武2，曾文1，王冰1. 燃料电池-燃气轮机混合动力系统的燃烧与系统性能分析[J]. 上海交通大学学报（自然版）, 2013, 47(12): 1957-1962.
[6]	周苏1a, 1b, 纪光霁1a, 刘冀晨1a, 胡哲2. 基于电流调节的燃料电池发动机过氧比波动研究[J]. 上海交通大学学报（自然版）, 2012, 46(11): 1712-1717.
[7]	徐宏, 徐帆, 张桂梅, 马锐, 郭晓霞, 房建华. 含咪唑基磺化聚酰亚胺质子交换膜的制备及性能[J]. 上海交通大学学报（自然版）, 2012, 46(03): 498-503.
[8]	全睿，全书海,黄亮，陈启宏. 基于模糊故障树的燃料电池发动机氢安全[J]. 上海交通大学学报（自然版）, 2010, 44(07): 951-0956.
[9]	刘爱虢，翁一武，于立军. 熔融碳酸盐燃料电池热力特性研究与实验分析[J]. 上海交通大学学报（自然版）, 2010, 44(07): 994-0999.