上海交通大学学报(自然版) ›› 2012, Vol. 46 ›› Issue (03): 474-479.
巫江虹,李程,杨兆光
收稿日期:
2011-03-07
出版日期:
2012-03-30
发布日期:
2012-03-30
基金资助:
广东省教育部产学研项目(2009B090300380), 广东省教育部产学研重点项目(2011A090200018), 2011年广东省战略性新兴产业发展专项资金新能源汽车产业项目
WU Jiang-Hong, LI Cheng, YANG Zhao-Guang
Received:
2011-03-07
Online:
2012-03-30
Published:
2012-03-30
摘要: 为了研究CO2流量分配不均匀度对气冷器流动特性和传热特性的影响,建立了跨临界CO2制冷系统的微通道气冷器分解模型. 实验结果表明:随着CO2制冷剂质量流量由110 kg/h增大到470 kg/h,扁平管内最大流量不均匀度由97% 降低到18%,流量是影响不均匀度的重要因素;流量分配不均度对CO2微通道气冷器的流动特性影响明显,而对传热特性影响较小. 比较了不同工况下相应的模拟结果与实验数据,平均换热系数误差为4.82%~38.25%,摩擦系数误差为6.09%~26.65%.
中图分类号:
巫江虹, 李程, 杨兆光. CO2微通道气冷器的流场分解模拟及实验验证[J]. 上海交通大学学报(自然版), 2012, 46(03): 474-479.
WU Jiang-Hong, LI Cheng, YANG Zhao-Guang. Decomposing Numerical Simulation and Experimental Verification of Carbon Dioxide Micro-channel Gas Cooler[J]. Journal of Shanghai Jiaotong University, 2012, 46(03): 474-479.
[1]Jabardo J M S, Mamani W G, Ianella M R. Modeling and experimental evaluation of an automotive air conditioning system with a variable capacity compressor[J]. International Journal of Refrigeration, 2002, 25(8):11571172.[2]Peles Y P, Haber S. A steady state, one dimensional, model for boiling two phase flow in triangular microchannel[J]. International Journal of Multiphase Flow, 2000, 26(7):10951115.[3]Chung K, Lee K S, Cha D J. A numerical study of flow distribution effect on a parallel flow heat exchanger[J]. KSME International Journal, 2001, 15(11):15631571.[4]饶政华, 廖胜明. CO2微通道气体冷却器的数值仿真与性能优化[J].化工学报, 2005, 56(9):17211726.RAO Zhenghua, LIAO Shengming. Numerical simulation and performance optimization of carbon dioxide microchannel gas cooler[J]. Journal of Chemical Industry and Engineering, 2005, 56(9):17211726.[5]陆平, 陈江平, 陈芝久. 微通道平行流气冷器流量分配的数值模拟[J]. 应用科学学报, 2007, 25(3):317322.LU Ping, CHEN Jiangping, CHEN Zhijiu. Computational fluid dynamics simulation of flow distribution in a gas cooler with microchannel parallel flow[J]. Journal of Applied Sciences, 2007, 25(3):317322.[6]黄冬平, 梁贞潜, 丁国良,等. 基于模型的CO2微通道气体冷却器性能分析[J].化工学报, 2002, 53(8):832836.HUANG Dongping, LIANG Zhenqian, DING Guoliang, et al. Modeling and performance analysis of carbon dioxide microchannel gas cooler[J]. Journal of Chemical Industry and Engineering, 2002, 53(8):832836.[7]梁贞潜, 丁国良, 张春路, 等. 二氧化碳汽车空调器仿真与优化[J].上海交通大学学报, 2002, 36(10):13971399.LIANG Zhenqian, DING Guoliang, ZHANG Chunlu, et al. Simulation and optimization of carbon dioxide automobile air conditioner[J]. Journal of Shanghai Jiaotong University, 2002, 36(10):13971399.[8]Uddin M F, Nurujjaman M, Assi C. Joint scheduling and spectrum allocation in wireless networks with frequencyagile radios[C]// Proc 9th International Conference on AdHoc Networks and Wireless. Edmonton, Canada: University of Alberta, 2010: 95108.[9]Xue R, Zhao D F, Zhu T L. An improved method for the convergence of iterative detection in turboCPM system[C]// Proc 5th International Conference on Wireless Communications, Networking and Mobile Computing. Beijing, China: IEEE Press, 2009: 445449.[10]Mclinden M, Klein S A, Lemmon E W, et al. Thermodynamic and transport properties of refrigerant and refrigerant mixtureREFPROP[R]. Version 601. National Institute of Standards and Technology, USA, 1998.[11]李程, 巫江虹, 崔晓龙, 等. CO2微通道气体冷却器压降与传热特性研究[J].西安交通大学学报, 2010, 44(9):4853.LI Cheng, WU Jianghong, CUI Xiaolong, et al. CO2 pressure drop and heat transfer characteristics in microchannel gas cooler[J]. Journal of Xi’an Jiaotong University, 2010, 44(9):4853.[12]于绿,郝柏林. 相变与临界现象[M].北京: 科学出版社,1992.[13]阙雄才, 陈江平. 汽车空调实用技术[M].北京: 机械工业出版社,2003.[14]Liao S M, Zhao T S. Measurement of heat transfer coefficient from supercritical carbon dioxide flowing in horizontal mini/micro channels[J]. Journal of Heat TransferTransactions of the ASME, 2002, 124(3):413420.[15]Yoon S H, Kim J H, Hwang Y W, et al. Heat transfer and pressure drop characteristics during the intube cooling process of carbon dioxide in the supercritical region[J]. International Journal of Refrigeration, 2003, 26(8):857864.[16]Dang C, Hihara E. Intube cooling heat transfer of supercritical carbon dioxide. Part 1. Experimental measurement[J]. International Journal of Refrigeration, 2004, 27(7):736747.[17]Huai X L, Koyama S, Zhao T S. An experimental study of flow and heat transfer of supercritical carbon dioxide in multiport mini channels under cooling conditions[J]. Chemical Engineering Science, 2005, 60(12):33373345.[18]Son C H, Park S J. An experimental study on heat transfer and pressure drop characteristics of carbon dioxide during gas cooling process in a horizontal tube[J]. International Journal of Refrigeration, 2006, 29(4):539546.[19]Huai X, Koyama S. Heat transfer characteristics of supercritical CO2 flow in smallchanneled structures[J]. Experimental Heat Transfer, 2007, 20(1):1933. |
[1] | 王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49. |
[2] | 袁振钦, 邹 科, 孙亚峰, 刘 刚, 屈 衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55. |
[3] | 王 娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31. |
[4] | 陈 欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36. |
[5] | 尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57. |
[6] | ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481. |
[7] | MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502. |
[8] | 安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-. |
[9] | KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162. |
[10] | ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230. |
[11] | ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9. |
[12] | HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39. |
[13] | WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713. |
[14] | QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778. |
[15] | WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||