座舱功能试验压力控制系统建模与PID控制器设计

上海交通大学学报（自然版） ›› 2011, Vol. 45 ›› Issue (07): 1074-1079.

座舱功能试验压力控制系统建模与PID控制器设计

韩叶飞，方刚，胡永祥，姚振强

(上海交通大学机械与动力工程学院，上海 200240)

收稿日期:2010-08-23 出版日期:2011-07-29 发布日期:2011-07-29
基金资助:
上海市科委重点项目资助课题（09DZ1122200）

Modeling and PID Controller Designing for
Pressure Control System of Cabin Function Test

HAN Ye-Fei, FANG Gang, HU Yong-Xiang, YAO Zhen-Qiang

(School of Mechanical Engineering, Shanghai Jiaotong University. Shanghai 200240, China)

Received:2010-08-23 Online:2011-07-29 Published:2011-07-29

摘要/Abstract

摘要： 针对座舱功能试验压力控制系统参数调试不允许在飞机座舱上直接进行的问题，建立了包括气动减压阀阀芯构件动态特性与试验管道压力变化过程等因素在内的座舱功能试验压力控制系统模型，可使压力控制系统设计客观化、解析化.通过对系统模型进行线性化和拟合降阶，再根据降阶模型应用解析化方法，设计了座舱功能试验压力控制系统的比例、积分、微分（PID）控制器，并对设计结果进行了仿真验证.结果表明，解析化方法设计的PID控制器可以满足飞机座舱功能试验压力控制系统的技术要求.
关键词：

关键词: , 座舱功能试验, 压力控制, 模型线性化, 比例、积分、微分控制器

Abstract: Aiming at the problem that it is not allowed to debug pressure control system parameters of cabin function test directly in the airplane cabin, the model of pressure control system in cabin function test was built. The model contains the effects caused by the dynamic characteristics of pneumatic valve components and the pressure variation process of pipeline, which makes the design of the control system objective and analytical. The model linearization and model reduction were applied to design PID controller for pressure control system in the cabin function test. The simulation results of pressure control system show the PID controller obtained by analytical method can meet the technical requirements of airplane cabin function test.

Key words: cabin function test, pressure control, model linearization, proportion integration differentiation(PID) controller

中图分类号:

V261.8

韩叶飞, 方刚, 胡永祥, 姚振强. 座舱功能试验压力控制系统建模与PID控制器设计[J]. 上海交通大学学报（自然版）, 2011, 45(07): 1074-1079.

HAN Ye-Fei, FANG Gang, HU Yong-Xiang, YAO Zhen-Qiang. Modeling and PID Controller Designing for
Pressure Control System of Cabin Function Test[J]. Journal of Shanghai Jiaotong University, 2011, 45(07): 1074-1079.

参考文献

［1］林更元. 航空制造工程手册［M］. 北京: 航空工业出版社, 1993:578580.

［2］Hunt E H, Reid D H, Space D R, et al. Commercial airliner environmental control system［EB/OL］.(199505).［20100725］. www.boeing.com/commercial/cabinair/ecs.pdf.

［3］Dobrescu E, Balazinski M. Fuzzy logic aircraft environment controller［C］//IEEE International Fuzzy Systems Conference. Atlanta, USA: Georgia State University, 2004:4145.

［4］武艳, 张大林.数字电子气动式座舱压力控制系统模型机性能分析［J］. 南京航空航天大学学报, 2008, 40(3):324328.

WU Yan, ZHANG Dalin. Modeling and performance analysis of Digital electronicpneumatic cabin pressure control system［J］. Journal of Nanjing University of Aeronautics & Astronautics, 2008, 40(3):324328.

［5］朱磊, 付永领, 赵竞全,等. 数字式座舱压力调节系统的模糊滑模变结构控制［J］. 应用科学学报, 2009,27 (5):545549.

ZHU Lei, FU Yongling, ZHAO Jingquan, et al. Fuzzy sliding mode variable structure control of digital cabin pressure regulating system［J］. Journal of Applied Sciences, 2009,27 (5):545549.

［6］Dong Y H, Gao H L, Zhou J E, et al. Mathematical modeling of gas release through holes in pipelines ［J］. Chemical Engineering Journal, 2003, 32:237241.

［7］Sorli M, Figliolini G, Pastorelli S. Dynamic model and experimental investigation of a pneumatic proportional pressure valve［J］. ASME Transactions on Mechatronics, 2004, 9 (1):7886.

［8］Ang K H, Chong G C, Li Y. PID control system analysis, design, and technology［J］. IEEE Transactions on Control Systems Technology, 2005, 13(4): 559576.

［9］Xue D Y，Chen Y Q，Atherton D P. Linear feedback control analysis and design with MATLAB［M］. Philadelphia, USA: SIAM Press, 2007:187198.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[7]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.