上海交通大学学报(自然版) ›› 2011, Vol. 45 ›› Issue (04): 439-445.
• 交通运输 • 下一篇
许鑫, 杨建民, 吕海宁
收稿日期:
2010-03-18
出版日期:
2011-04-29
发布日期:
2011-04-29
基金资助:
国家高技术研究发展计划(863)项目(2006AA09A107),上海市科委基地能力建设项目(07DZ22027)
XU Xin, YANG Jian-Min, 吕Hai-Ning
Received:
2010-03-18
Online:
2011-04-29
Published:
2011-04-29
摘要: 以一座导管架平台实际安装为例,分别使用数值计算和模型试验的方法对浮托法安装进行了系统的研究.对整个浮托安装过程仔细剖析,选出具有代表性的工况,分别从频域和时域两方面分析.分析结果表明,数值计算与模型试验结果吻合良好,数值模拟方法具有较高的可靠性.在所考虑的海况条件下,驳船与上部模块运动符合要求,各种装置上受力均在允许范围内,可以进行安装作业.
中图分类号:
许鑫, 杨建民, 吕海宁. 导管架平台浮托法安装的数值模拟与模型试验[J]. 上海交通大学学报(自然版), 2011, 45(04): 439-445.
XU Xin, YANG Jian-Min, LV Hai-Ning . Experimental and Numerical Analysis for Floatover Installation on Jacket[J]. Journal of Shanghai Jiaotong University, 2011, 45(04): 439-445.
[1]O’Neill L A, Fakas E, Ronalds B F, et al. History, trends and evolution of floatover installation in open waters[C]// Society of Petroleum Engineers Conference. Texas, USA : SPE,2000,: 1240.[2]Michel Seij , Henk de Groot. State of the art in floatovers [C]// Offshore Technology Conference. Houston, USA : OTC, 2007: 19072.[3]Tribout C, Emery D,Weber P. Floatovers offshore west africa [C]// Offshore Technology Conference. Houston, USA: OTC, 2007: 19073.[4]杜夏英, 孔令海, 陈涛, 等. 南堡352CEP组块Floatover安装方法探索[J]. 中国海洋平台, 2007,22(4):3943.DU Xiaying, KONG Linghai, CHEN Tao ,et al. Searching for floatover installation of Nanpu 352 CEP moudule [J]. China Offshore Platform, 2007,22(4):3943.[5]张威,杨建民,胡志强,等. 深水半潜式平台模型试验与数值分析[J]. 上海交通大学学报, 2007, 41(9): 14291434.ZHANG Wei, YANG Jianmin, HU Zhiqiang ,et al. The experimental and numerical analysis for a deepwater semisubmersible platform. [J]. Journal of Shanghai Jiaotong University, 2007, 41(9): 14291434.[6]JeanMarc Cholley, Anne Vanneste. Comparison of tank testing and numerical analysis for the design of a catamaran for deck installation by the floatover method [C]//Offshore Technology Conference. Houston, USA : OTC, 2009: 19835.[7]Arcandra Tahar, John Halkyard, Atle Steen ,et al. Float over installation method comprehensive comparison between numerical and model test results[J].Journal of Offshore Mechanics and Arctic Engineering. 2006, 128: 257262. |
[1] | 王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49. |
[2] | 袁振钦, 邹 科, 孙亚峰, 刘 刚, 屈 衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55. |
[3] | 王 娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31. |
[4] | 陈 欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36. |
[5] | 尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57. |
[6] | MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502. |
[7] | ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481. |
[8] | 安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-. |
[9] | KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162. |
[10] | ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230. |
[11] | ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9. |
[12] | HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39. |
[13] | WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713. |
[14] | QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778. |
[15] | WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||