On the multi-layer forging die used in daily life, stressed ring can strength the die structure within elastic deformation and the die material can be self-strengthened through uniform plastic deformation by autofrettage effect, whereas the thermal effect generated during forging process can directly influence the stress state and dimension of the forging die in service. In this study, an analytical solution of the thermo-elastic-plastic deformation in the forging die is derived. The relationships between the radial and circumferential stresses and the temperature distribution, which are directly related to geometric parameters, material properties and working pressure, are determined. This helps to better understand the thermo-elastic-plastic deformation behavior of the die and design the combined forging die to achieve long service life and high accuracy product.
CAO Minye (曹民业), MIAO Hongliang (苗宏量), HU Chengliang∗ (胡成亮), ZHAO Zhen (赵 震)
. Analytical Solution of Thermo-Elastic-Plastic Deformation of the Combined Forging Die[J]. Journal of Shanghai Jiaotong University(Science), 2023
, 28(2)
: 280
-288
.
DOI: 10.1007/s12204-021-2388-z
[1] QIN Y, BALENDRA R. FE simulation of the influence of die-elasticity on component dimensions in forward extrusion [J]. International Journal of Machine Tools and Manufacture, 1997, 37(2): 183-192.
[2] PARK Y B, LEE K H. Study on the deformation of die and product in closed die upsetting [J]. Journal of Materials Processing Technology, 2001, 118(1/2/3): 417-421.
[3] LEE Y, LEE J, ISHIKAWA T. Analysis of the elastic characteristics at forging die for the cold forged dimensional accuracy [J]. Journal of Materials Processing Technology, 2002, 130/131: 532-539.
[4] ISHIKAWA T, YUKAWA N, YOSHIDA Y, et al. Prediction of dimensional difference of product from tool in cold backward extrusion [J]. CIRP Annals-Manufacturing Technology, 2000, 49(1): 169-172.
[5] QIN Y, BALENDRA R, CHODNIKIEWICZ K. Analysis of temperature and component form-error variation with the manufacturing cycle during the forward extrusion of components [J]. Journal of Materials Processing Technology, 2004, 145(2): 171-179.
[6] LONG H, BALENDRA R. FE simulation of the influence of thermal and elastic effects on the accuracy of cold-extruded components [J]. Journal of Materials Processing Technology, 1998, 84(1/2/3): 247-260.
[7] HU C L, YANG F Y, ZHAO Z, et al. Thermo-elastic deformation of three-layer combined die under steady-state temperature field [J]. Journal of Thermal Stresses, 2016, 39(1): 103-119.
[8] LI Z B, ZENG F, ZHAO Z, et al. Optimized design for a combined die with two stress rings in cold forging considering thermal-mechanical effects [J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(3): 304-314.
[9] HU C L, ZHAO Z, ZHI Y S, et al. Thermoelastic deformation of three-layer combined die with nonuniform temperature distribution [J]. Journal of Thermal Stresses, 2014, 37(10): 1230-1243.
[10] ?RTS PEDERSEN T. Numerical modelling of cyclic plasticity and fatigue damage in cold-forging tools [J]. International Journal of Mechanical Sciences, 2000, 42(4): 799-818.
[11] JAHED H, FARSHI B, HOSSEINI M. Fatigue life prediction of autofrettage tubes using actual material behaviour [J]. International Journal of Pressure Vessels and Piping, 2006, 83(10): 749-755.
[12] ZARE H R, DARIJANI H. A novel autofrettage method for strengthening and design of thick-walled cylinders [J]. Materials & Design, 2016, 105: 366-374.
[13] HU C L, YANG F Y, ZHAO Z, et al. An alternative design method for the double-layer combined die using autofrettage theory [J]. Mechanical Sciences, 2017, 8(2): 267-276.
[14] GRONOSTAJSKI Z, HAWRYLUK M. The main aspects of precision forging [J]. Archives of Civil and Mechanical Engineering, 2008, 8(2): 39-55.
[15] HUR K D, CHOI Y, YEO H T. Design for stiffness reinforcement in backward extrusion die [J]. Journal of Materials Processing Technology, 2002, 130/131: 411-415.
[16] LONG H. Quantitative evaluation of dimensional errors of formed components in cold backward cup extrusion [J]. Journal of Materials Processing Technology, 2006, 177(1/2/3): 591-595.
[17] ISHIKAWA T, ISHIGURO T, YUKAWA N, et al. Control of thermal contraction of aluminum alloy for precision cold forging [J]. CIRP Annals-Manufacturing Technology, 2014, 63(1): 289-292.
