Previous studies show that the tip clearance loss limits the improvement of pumpjet propulsor (PJP) performance, and the tip clearance flow field is the most complicated part of PJP flow. In this work, the noncavitation and cavitation hydrodynamic performances of PJP with a tip clearance size of 1mm are obtained by using the detached-eddy simulation (DES). At constant oncoming velocity, cavitation first occurs on the duct and then disappears with the decrease of the advance ratio. The rotor blade cavitation occurs at the low advance ratio and comprises tip clearance cavitation, tip leakage cavitation, and blade sheet cavitation. In the rotor region, the typical vortices include tip separation vortex, tip leakage vortex, trailing edge shedding vortex, and blade root horseshoe vortex. Combined with the pressure distribution, both the Q and λ2 criteria give reliable results of vortex identification. The cavitation causes an expansion of tip leakage vortex in the circumferential direction and decreases the intensities of tip separation vortex in the whole tip clearance area and tip leakage vortex in the cavitation area, and enhances the strength of tip leakage vortex in the downstream non-cavitation area.
[1] PAN G, LU L, SAHOO P K. Numerical simulation of unsteady cavitating flows of pumpjet propulsor [J].Ships and Offshore Structures, 2016, 11(1): 64-74. [2] CHOWJ S, ZILLIAC G G, BRADSHAWP. Mean and turbulence measurements in the near field of a wingtip vortex [J]. AIAA Journal, 1997, 35(10): 1561-1567. [3] HUANG B, ZHAO Y, WANG G Y. Large eddy simulation of turbulent vortex-cavitation interactions in transient sheet/cloud cavitating flows [J]. Computers & Fluids, 2014, 92(3): 113-124. [4] YOU D Y, MITTAL R, WANG M, et al. Computational methodology for large-eddy simulation of tipclearance flows [J]. AIAA Journa, 2004, 42(2): 271-279. [5] WANG Y J, ABDEL-MAKSOUD M, WANG K Q, et al. Prediction of tip vortex cavitation inception with low-order panel method [J]. Ocean Engineering, 2016,125: 124-133. [6] GAGGERO S, TANI G, VIVIANI M, et al. A study on the numerical prediction of propellers cavitating tip vortex [J]. Ocean engineering, 2014, 92: 137-161. [7] HUANG R F, JI B, LUO XW, et al. Numerical investigation of cavitation-vortex interaction in a mixed-flow waterjet pump [J]. Journal of Mechanical Science and Technology, 2015, 29(9): 3707-3716. [8] ZHANG D S, SHI L, SHIW D, et al. Numerical analysis of unsteady tip leakage vortex cavitation cloud and unstable suction-side-perpendicular cavitating vortices in an axial flow pump [J]. International Journal of Multiphase Flow, 2015, 77: 244-259. [9] ZHANG D S, SHI L, ZHAO R J, et al. Study on unsteady tip leakage vortex cavitation in an axial-flow pump using an improved filter-based model [J]. Journal of Mechanical Science and Technology, 2017, 31(2):659-667. [10] SHI L, ZHANG D S, ZHAO R J, et al. Effect of blade tip geometry on tip leakage vortex dynamics and cavitation pattern in axial-flow pump [J]. Science China Technological Sciences, 2017, 60(10): 1480-1493. [11] SURYANARAYANA C, SATYANARAYANA B, RAMJI K, et al. Cavitation studies on axi-symmetric underwater body with pumpjet propulsor in cavitation tunnel [J]. International Journal of Naval Architecture and Ocean Engineering, 2010, 2(4): 185-194. [12] LU L, PAN G, WEI J, et al. Numerical simulation of tip clearance impact on a pumpjet propulsor [J].International Journal of Naval Architecture and Ocean Engineering, 2016, 8(3): 219-227. [13] PEREIRA F, SALVATORE F, FELICE D F, et al. Experimental and numerical investigation of the cavitation pattern on a marine propeller [C]//Proceedings of the 24th Symposium on Naval Hydrodynamics.Fukuoka, Japan, 2002: 236-251. [14] SALVATORE F, STRECKWALL H, TERWISGA T V. Propeller cavitation modelling by CFD: Results from the VIRTUE 2008 Rome Workshop[C]//Proceedings of the First International Symposium on Marine Propulsors. Trondheim, Norway, 2009: 1-10. [15] SUBHAS, SAJI V F, RAMAKRISHNA S, et al. CFD analysis of a propeller flow and cavitation [J]. International Journal of Computer Applications, 2012, 55(16):26-33. [16] MORGUT M, NOBILE E. Influence of the mass transfer model on the numerical prediction of the cavitating flow around a marine propeller [C]//Proceedings of Second International Symposium on Marine Propulsors.Hamburg, Germany, 2011: 1-8. [17] MENTER F R. Zonal two equation k-ω turbulence models for aerodynamic flows [C]//AIAA 24th Fluid Dynamics Conference. Orlando, Florida: AIAA, 1993:2906. [18] MENTER F R. Two-equation eddy-viscosity turbulence models for engineering applications [J]. AIAA Journal, 1994, 32(8): 1598-1605. [19] WILCOX D C. Turbulence modeling for CFD [M]. La Canada, California: DCW Industries Inc, 1993. [20] SPALART P R, JOUWH, STRELETS M, et al. Comments on the feasibility of LES for wings, and on a hybird RANS/LES approach [C]//Proceedings of First AFOSR International Conference on DNS/LES. Greyden Press, 1997: 1-10. [21] STRELETS M. Detached eddy simulation of massively separated flows [C]// 39th AIAA Aerospace Sciences Meeting and Exhibit. Reno, NV: AIAA, 2001: 0879. [22] SPALART P R, DECK S, SHURML, et al. A new version of detached-eddy simulation, resistant to ambiguous grid densities [J]. Theoretical and Computational Fluid Dynamics, 2006, 20(3): 181-195. [23] SPALART P R. Detached-eddy simulation [J]. Annual Review of Fluid Mechanics, 2009, 41: 181-202. [24] BRENNEN C E. Cavitation and bubble dynamics [M].Oxford: Oxford University Press, 2013. [25] PLESSET M S. The dynamics of cavitation bubbles[J]. Journal of Applied Mechanics, 1949, 16: 277-282. [26] RAYLEIGH L. On the pressure developed in a liquid during the collapse of a spherical cavity [J]. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, 1917, 34: 94-98. [27] SHI Y, PAN G, HUANG Q G, et al. Numerical simulation of cavitation characteristics for pump-jet propeller[J]. Journal of Physics: Conference Series, 2015,640(1): 012035. [28] STERN F, WILSON R V, COLEMAN H W, et al.Comprehensive approach to verification and validation of CFD simulations. Part 1. Methodology and procedures[J]. Journal of Fluids Engineering, 2001, 123:793-802. [29] WILSON R, SHAO J, STERN F. Discussion: Criticisms of the “correction factor” verification method [J].Journal of Fluids Engineering, 2004, 126: 704-706. [30] STERN F, WILSON R, SHAO J. Quantitative V&V of CFD simulations and certification of CFD codes [J].International Journal for Numerical Methods in Fluids,2006, 50: 1335-1355. [31] CHONG M S, PERRY A E, CANTWELL B J. A general classification of three-dimensional flow fields [J].Physics of Fluids A: Fluid Dynamics, 1990, 2(5): 765-777. [32] ZHOU J, ADRIAN R J, BALACHANDAR S, et al. Mechanisms for generating coherent packets of hairpin vortices in channel flow [J]. Journal of Fluid Mechanics,1999, 387: 353-396. [33] HUNT J C R, WRAYA A, MOIN P. Eddies, streams, and convergence zones in turbulent flows[C]//Proceeding of the Summer Program in Center for Turbulence Research. Stanford (CA): CTR, 1988: 193-208. [34] JEONG J, HUSSAIN F. On the identification of a vortex [J]. Journal of Fluid Mechanics, 1995, 285: 69-94.
