WANG Tiantian1 (王天田), LIN Feng1* (林峰), HU Jie1 (胡杰),KE Yuqiang2 (柯于强), ZHANG Yueqiu3 (张岳秋) . Control Strategy Research of a Selective Catalytic Reduction System for Heavy-Duty Application[J]. Journal of Shanghai Jiaotong University(Science), 2017 , 22(5) : 577 -588 . DOI: 10.1007/s12204-017-1866-9

[1] SKAF Z, ALIYEV T, SHEAD L, et al. The state ofthe art in selective catalytic reduction control [J]. SAETechnical, 2014. Doi: 10.4271/2014-01-1533 (publishedonline). [2] ZHANG S M, TIAN F, REN G F, et al. SCR controlstrategy based on ANNs and fuzzy PID in a heavyduty diesel engine [J]. International Journal of AutomotiveTechnology,2012, 13(5): 693-699. [3] SURENAHALLI H S, PARKER G, JOHNSON J. ExtendedKalman filter estimator for NH3 storage, NO,NO2 and NH3 estimation in a SCR [J]. SAE Technical,2013. Doi: 10.4271/2013-01-1581 (published online). [4] CHEN P E, WANG J M. Nonlinear and adaptivecontrol of NO/NO2 ratio for improving selective catalyticreduction system performance [J]. Journal of theFranklin Institute. 2013, 350(8): 1992-2012. [5] HU J, ZHAO Y G, CHEN T, et al. Study of controlstrategy for urea-SCR after-treatment system of heavyduty diesel engine [J]. Chinese Internal CombustionEngine Engineering, 2011, 32(2): 1-5 (in Chinese). [6] SCH¨AR C M, ONDER C H, GEERING H P. Controlof an SCR catalyst converter system for a mobileheavy-duty application [J]. IEEE Transactions onControl Systems Technology, 2006, 14(4): 641-652. [7] BLAKEMAN P, ARNBY K, MARSH P, et al.Optimization of an SCR catalyst system to meetEU-IV heavy duty diesel legislation [C]//2008 SAEInternational Powertrains, Fuels and LubricantsCongress. Shanghai: SAE, 2008: 1-8. [8] DEVARAKONDAM, PARKER G, JOHNSON J H, etal. Model-based control system design in a urea-SCRafter treatment system based on NH3 sensor feedback[J]. International Journal of Automotive Technology,2009, 10(6): 653-662. [9] HAGA H, HASHIMOTO E, NAKAJIMA K, et al. Newconcept urea-SCR control for super clean diesel vehicle[C]//7th IFAC Symposium on Advances in AutomotiveControl. Tokyo: The International Federation of AutomaticControl, 2013:15-16. [10] ZHANG H, WANG J M. Ammonia coverage ratio aninput simultaneous estimation in ground vehicle selectivecatalytic reduction (SCR) systems [J]. Journal ofthe Franklin Institute, 2015, 352(2): 708-723. [11] WILLEMS F, CLOUDT R, VAN DEN EIJNDEN E,et al. Is closed-loop SCR control required to meet futureemission targets [J]. SAE Technical, 2007. Doi:10.4271/2007-01-1574 (published online). [12] ZHANG H, WANG J M, WANG Y Y. Nonlinear observerdesign of diesel engine selective catalytic reductionsystems with NOx sensor measurements [J].IEEE/ASME Transactions on Mechatronics, 2015,20(4): 1585-1594. [13] ZHANG H, WANG J M, WANG Y Y. Sensor reductionin diesel engine two-cell selective catalytic reduction(SCR) systems for automotive applications[J]. IEEE/ASME Transactions on Mechatronics, 2015,20(5): 2222-2233. [14] CHEN P E, WANG J M. Estimation of automotiveurea-based selective catalytic reduction systems duringlow temperature operations [C]//American ControlConference. Portland, Oregon: IEEE, 2014: 1523-1528. [15] SALANTA G, ZHENG G Y, KOTRBA A, et al.Optimization of a urea SCR system for on-highwaytruck applications [J]. SAE Technical, 2010. Doi:10.4271/2010-01-1938 (published online). [16] HERMAN A, WU M C, CABUSH D, et al. Modelbased control of SCR dosing and OBD strategies ithfeedback from NH3 sensors [J]. SAE InternationalJournal of Fuels & Lubricants, 2009, 2(1): 375-385. [17] WILLEMS F, CLOUDT R. Experimental demonstrationof a new model-based SCR control strategy forcleaner heavy-duty diesel engines [J]. IEEE Transactionson Control Systems Technology, 2011, 19(5):1305-1313. [18] HSIEH M F, WANG J M. Diesel engine selective catalyticreduction (SCR) ammonia surface coverage controlusing a computationally-efficient model predictivecontrol assisted method [C]//ASME 2009 DynamicSystems and Control Conference. Hollywood, California:ASME, 2009: 865-872. [19] CHEN P E, WANG J M. Sliding-mode observers forurea selective catalytic reduction system state estimationsbased on nitrogen oxide sensor measurements [J].Journal of Automobile Engineering, 2015, 229(7): 835-849. [20] LIU C B. Research on control strategy and matchingof amino SCR system of diesel engine [D]. Wuhan:School of Automotive Engineering, Wuhan Universityof Technology, 2013 (in Chinese). [21] Tong D H. Study on control strategy for SCR technologyto reduce NOx emission from heavy-duty dieselengines [D]. Jinan: School of Energy and Power Engineering,Shandong University, 2009 (in Chinese). [22] SONG Q W, ZHU G. Model-based closed-loop controlof urea SCR exhaust after treatment system fordiesel engine [C]//SAE 2002 World Congress. Detroit,Michigan: SAE, 2002: 1-8. [23] CHI J N. Control challenges for optimal NOx conversionefficiency from SCR after treatment systems[J]. SAE Technical, 2009. Doi: 10.4271/2009-01-0905(published online). [24] ZHANG H. NOx sensor ammonia-cross-sensitivity factorestimation in diesel engine selective catalytic reductionsystems [C]//International Conference on Mechatronicsand Control. Jinzhou: IEEE, 2014:1916-1921. [25] HSIEH M F, WANG J M. Design and experimentalvalidation of an extended Kalman filter-based NOx,concentration estimator in selective catalytic reductionsystem applications [J]. Control Engineering Practice,2011, 19(4): 346-353. [26] WANG T T, YAN F W, HU J, et al. Feed back controlfor SCR system by cross-sensitivity of the NOx sensorto NH3 [J]. Transactions of CSICE, 2015, 27(5): 417-422 (in Chinese).