In this paper, physical property parameters including density, viscosity and surface tension of different
contents of diesel-gasoline blend fuel were measured and analyzed. The experiments were performed on the dieselgasoline
blend fuels with 4 different volume fractions of diesel (20%, 40%, 60% and 80%) at temperature from 5?C to 65?C. The influence of temperature
and diesel content on the blends’ properties was summarized based on
experimental data, formulas about the material parameters were established, and the accuracy of these formulas
was verified. Besides, saturated vapor pressure, freezing point and flash point of the blend fuel have also been
measured and analyzed, and a database of the material parameters of the blends was also established.
BAO Tang-tang (包堂堂), ZHOU Bo (周波), DENG Jun (邓俊), WU Zhi-jun* (吴志军)
. Research on the Physical Property of Diesel-Gasoline Blend Fuel[J]. Journal of Shanghai Jiaotong University(Science), 2014
, 19(6)
: 721
-727
.
DOI: 10.1007/s12204-014-1574-7
[1] Luo Ma-ji. A simulation research on the HCCI combustion of the neat diethyl ether fuel and DME-LPG blending fuels [D]. Report of Post-Doctoral Research,Shanghai Jiao Tong University, Shanghai, 2004 (in Chinese).
[2] Ryan T, Callahan T J. Homogeneous charge compression ignition of diesel fuel [C]//International Fuels & Lubricants Meeting & Exposition. Detroit, Michigan,USA: Society of Automotive Engineers, 1996.
[3] Lavy J, Dabadie J, Angelberger C, et al. Innovative ultra-low NOx controlled auto-ignition combustion process for gasoline engines: the 4-SPACE Project [C]//CEC/SAE Spring Fuels & Lubricants Meeting.Paris, France: Co-ordinating European Council & Society of Automotive Engineers, 2000.
[4] Bessonette P, Schleyer C H, Duffy K P, et al.Effects of fuel property changes on heavy-duty HCCI combustion [C]//SAE 2007 World Congress & Exhibition.Detroit, Michigan, USA: Society of Automotive Engineers, 2007.
[5] Turner D, Tian G H, Xu H M, et al. An experimental study of dieseline combustion in a direct injection engine [C]//SAE 2009 World Congress & Exhibition.Detroit, Michigan, USA: Society of Automotive Engineers,2009.
[6] Han D, Ickes A M, Assanis D N, et al. Attainment and load extension of high-efficiency premixed low-temperature combustion with dieseline in a compression ignition [J]. Energy and Fuels, 2010, 24(6):3517-3525.
[7] Kokjohn S L, Hanson R M, Splitter D A, et al. Experiments and modeling of dual-fuel HCCI and PCCI combustion using in-cylinder fuel blending [J].SAE International Journal of Engines, 2010, 2(2): 24-39.
[8] Smallbone A, Bhave A, Coble A, et al. Simulating PM emissions and combustion stability in gasoline/diesel fuelled engines [C]//SAE 2011 World Congress & Exhibition. Detroit, Michigan, USA: Society of Automotive Engineers, 2011.
[9] Cha J, Kwon S, Park S. An experimental and modeling study of the combustion and emission characteristics for gasoline-diesel dual-fuel engines [J]. Journal of Automobile Engineering, 2010, 225(6): 801-812.
[10] Sahin Z. Experimental and theoretical investigation of the effects of gasoline blends on single-cylinder diesel engine performance and exhaust emissions [J]. Energy & Fuels, 2008, 22(5): 3201-3212.
[11] GB17930-2011, Chinese national standard, gasoline fuel for motor vehicle (Phase4) [S]. (in Chinese).
[12] GB19147-2009, Chinese national standard, diesel fuel for motor vehicle (Phase4) [S]. (in Chinese).[13] Yaws C L. Chemical properties handbook [M]. New York: McGraw-Hill Book, 1999: 185-187.
