J Shanghai Jiaotong Univ Sci

Journal of Shanghai Jiaotong University(Science) >

2012 , Vol. 17 >Issue 5: 579 - 585

DOI: https://doi.org/10.1007/s12204-012-1328-3

Articles

Modified Nafion Polymer Electrolyte Membranes by γ-Ray Irradiation Used in Direct Methanol Fuel Cells

Expand
  • (1. Faculty of Science, Kunming University of Science and Technology, Kunming 650500, China; 2. Metallurgical Engineering Postdoctoral Flow Station, Kunming University of Science and Technology, Kunming 650093, China; 3. Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650500, China; 4. Faculty of Metallurgy and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China; 5. Department of Applied Engineering, Zhejiang Economic & Trade Polyetchnic, Hangzhou 310018, China)

Online published: 2012-11-16

Fold

Abstract

Modification of the commercial polymer electrolyte membrane (PEM) Nafion 117 by γ-ray irradiation to produce an improved proton exchange membrane for direct methanol fuel cells (DMFCs) was described. The Nafion 117 membrane was exposed under γ-ray irradiation circumstance with the irradiation doses from 103 to 105 Gy. Subsequently the properties of the membrane itself, in terms of swelling ratio, water uptake rate, proton conductivity and methanol permeability, together with the performance of its membrane electrode assembly (MEA) in DMFC were analyzed and contrasted with the untreated material. When the Nafion 117 membrane was exposed under γ-ray irradiation circumstance, the degradation and crosslinking reactions occurred at the same time. Specific scopes of the γ-ray irradiation dose may cause the membrane crosslinking, thus reduce the membrane swelling ratio and decrease the methanol crossover. By reducing the membrane swelling ratio and methanol permeation, the single DMFC with the modified Nafion 117 membrane produced reasonable power density performance as high as 32W/m2 under 2mol/L methanol solution at room temperature.

Key words： Nafion 117 membrane; γ-ray irradiation; modification; direct methanol fuel cell (DMFC)

Cite this article

SUO Chun-guang1,2* (索春光), ZHANG Wen-bin3 (张文斌)， WANG Hua4 (王华), YANG Feng-jie5 (杨凤杰) . Modified Nafion Polymer Electrolyte Membranes by γ-Ray Irradiation Used in Direct Methanol Fuel Cells[J]. Journal of Shanghai Jiaotong University(Science), 2012 , 17(5) : 579 -585 . DOI: 10.1007/s12204-012-1328-3

References

[1] Baldauf M, Preidel W. Starus of the development of a direct methanol fuel cell [J]. Journal of Power Sources, 1999, 84: 161-166.

[2] Kamarudin S K, Daud W R W, Ho S L, et al.Overview on the challenges and developments of microdirect methanol fuel cells (DMFC) [J]. Journal of Power Sources, 2007, 163: 743-754.

[3] Sharma S, Pollet B G. Support materials for PEMFC and DMFC electrocatalysts: A review [J].Journal of Power Sources, 2012, 208: 96-119.

[4] Heinzel A, Barragan V M. A review of the stateof-the-art of the methanol crossover in direct methanol fuel cells [J]. Journal of Power Sources, 1999, 84: 70-74.

[5] Wei Y, Matar S, Shen L, et al. A novel membrane for DMFC-Na2Ti3O7 nanotubes/Nafion composite membrane: Performances studies [J].International Journal of Hydrogen Energy, 2012, 37:1857-1864.

[6] Maiti J, Kakati N, Lee S H, et al. PVA nano composite membrane for DMFC application [J]. Solid State Ionics, 2011, 201: 21-26.

[7] Haubold H G, Vad T, Jungbluth H, et al. Nano structure of Nafion: A SAXS study [J]. Electrochimica Acta, 2001, 46: 1559-1563.

[8] Kim Y J, Choi W C, Woo S I, et al. Proton conductivity and methanol permeation in Nafion/ORMOSIL prepared with various organic silanes [J]. Journal of Membrane Science, 2004, 238: 213-222.

[9] Liu J, Wang H, Cheng S, et al. Nafion-polyfurfuryl alcohol nanocomposite membranes for direct methanol fuel cells [J]. Journal of Membrane Science, 2005, 246:95-101.

[10] Zhong S, Cui X, Cai H, et al. Crosslinked sulfonated poly(ether ether ketone) proton exchange membranes for direct methanol fuel cell applications [J]. Journal of Power Sources, 2007, 164: 65-72.

[11] Li L, Zhang Y. Chemical modification of Nafion membrane with 3,4-ethylenedioxythiophene for direct methanol fuel cell application [J]. Journal of Power Sources, 2008, 175: 256-260.

[12] Jaafar J, Ismail A F, Matsuura T, et al. Performance of SPEEK based polymer-nanoclay inorganic membrane for DMFC [J]. Journal of Membrane Science,2011, 382: 202-211.

[13] Yang C C, Lee Y J. Preparation of the acidic PVA/MMT nanocomposite polymer membrane for the direct methanol fuel cell (DMFC) [J]. Thin Solid Films,2009, 517: 4735-4740.

[14] Lakouraj M M, Tajbakhsh M, Mokhtary M.Synthesis and swelling characterization of cross-linked PVP/PVA hydrogels [J]. Iranian Polymer Journal,2005, 14(12): 1022-1030.

[15] Yildirim M H, Schwarz A, Stamatialis D F, et al. Impregnated mambranes for direct methanol fuel cells at high methanol concentrations [J]. Journal of Membrane Science, 2009, 328: 127-133.

[16] Caracino P, Ballabio O, Colombo M, et al. Polymeric fluorine-free electrolyte for application in DMFC [J]. International Journal of Hydrogen Energy, 2009,34: 4653-4660.

[17] Dimitrova P, Friedrich K A, Vogt B, et al. Transport properties of ionomer composite membranes for direct methanol fuel cells [J]. Journal of Electroanalytical Chemistry, 2002, 532: 75-83.

[18] Tricoli V. Proton and methanol transport in poly(perfluorosulfonate) membranes containing Cs+ and H+ cations [J]. Journal of The Electrochemical Society, 1998, 145(11): 3798-3801.

[19] Wu Hong, Wang Yu-xin, Wang Shi-chang. A new alcohol rejecting and proton conductive membrane in DMFC: PVA-blend-Nafion membranes [J]. Journal of Chemical Engineering of Chinese Universities, 2002,16(3): 326-330 (in Chinese).

[20] Antonucci P L, Arico A S, Creti P, et al. Investigation of a direct methanol fuel cell based on a composite Nafion-silica electrolyte for high temperature operation [J]. Solid State Ionics, 1999, 125: 431-437.

Options
Outlines

/

〈 〉