[1] |
GONTSOV N G, MARINOVA O A, TANANAEV A V. Turbulent flow around a bend in a circular pipe [J].Hydrotechnical Construction, 1984, 18(12): 596-602.
|
[2] |
DUTTA P, NANDI N. Numerical study on turbulent separation reattachment flow in pipe bends with different small curvature ratio [J]. Journal of the Institution of Engineers (India): Series C, 2019, 100(6):995-1004.
|
[3] |
XIE H Y. Numerical simulation of local water pressure loss for bend pipe of circular section at 90 degrees [J].Journal of Water Resources and Water Engineering,2014, 25(5): 190-192 (in Chinese).
|
[4] |
WEI Z Y. Numerical simulation of resistance loss and flow field characteristics of bend [J]. Gansu Water Resources and Hydropower Technology, 2018, 54(6): 34-36 (in Chinese).
|
[5] |
LUO Y H, YANG J, PAN W M. Calculation of turbulent flow in 90? elbow pipe with square cross-section[J]. Engineering Journal of Wuhan University, 2003,36(2): 62-65 (in Chinese).
|
[6] |
QIU L J, ZHANG G F, HAO M. Numerical simulation of internal flow field in bend duct based on FLUENT[J]. Journal of Liaoning Shihua University, 2013,33(1): 48-52 (in Chinese).
|
[7] |
SUN Y Z, HU S G, ZHAO J, et al. Numerical study on flow characteristics of 90° bend pipe under different Reynolds number [J]. Journal of University of Shanghai for Science and Technology, 2010, 32(6): 525-529(in Chinese).
|
[8] |
DUTTA P, SAHA S K, NANDI N, et al. Numerical study on flow separation in 90? pipe bend under high Reynolds number by k-ε modelling [J]. Engineering Science and Technology, an International Journal,2016, 19(2): 904-910.
|
[9] |
HUMPHREY J A C, WHITELAW J H, YEE G. Turbulent flow in a square duct with strong curvature [J].Journal of Fluid Mechanics, 1981, 103: 443-463.
|
[10] |
DING Z R. Engineering fluid mechanics (Volume 1)[M]. Beijing: Mechanical Industry Press, 2013 (in Chinese).
|
[11] |
WANG Z J, LI X H, TANG L J, et al. Optimization research on deflectors installed in right-angle bend tube with rectangular section [J]. Huadian Technology,2019, 41(8): 32-37 (in Chinese).
|
[12] |
LAN L W. Numerical simulation analysis of inducting elbow [J]. Guangzhou Chemical Industry, 2014, 42(1):105-106 (in Chinese).
|
[13] |
YU F, LIU M, LI W D, et al. Layout optimization of guide plates in a 90 degree elbow with rectangular cross section [J]. Journal of Chinese Society of Power Engineering, 2015, 35(2): 147-152 (in Chinese).
|
[14] |
LIU F, HE J Y, LONG Z H. Parameter sensitivity analysis of water head loss calculation of 90° curved pipe based on CFD [J]. Journal of Irrigation and Drainage, 2019, 38(8): 79-83 (in Chinese).
|