Application of Digital Image Correlation Method to In-Situ Dynamic Strain Measurement

doi:10.1007/s12204-017-1864-y

Abstract

Abstract: Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and pointwise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.

Key words: digital image correlation (DIC)| in-situ dynamic strain| metallic material| deformation measurement

摘要： Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and pointwise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.

关键词: digital image correlation (DIC)| in-situ dynamic strain| metallic material| deformation measurement

CLC Number:

TG 404

LIN Liexiong (林烈雄), LU Hao* (陆皓), XU Jijin (徐济进),CHEN Junmei (陈俊梅), YU Chun (余春). Application of Digital Image Correlation Method to In-Situ Dynamic Strain Measurement[J]. Journal of Shanghai Jiao Tong University (Science), 2017, 22(6): 719-725.

References 19

[1]	SUN C, BROWN D W, CLAUSEN B, et al. In-situneutron diffraction study on temperature dependentdeformation mechanisms of ultrafine grained austeniticFe-14Cr-16Ni alloy [J]. International Journal of Plasticity,2014, 53: 125-134.
[2]	POLATIDIS E, ZOTOV N, BISCHOFF E, et al. Theeffect of cyclic tensile loading on the stress-inducedtransformation mechanism in superelastic NiTi alloys:An in-situ X-ray diffraction study [J]. Scripta Materialia,2015, 100: 59-62.
[3]	ZHAO L, JING H Y, XU L Y, et al. Effect of residualstress on creep crack growth behavior in ASME P92steel [J]. Engineering Fracture Mechanics, 2013, 110:233-248.
[4]	REN Z G, CHEN M, LU Z A, et al. Dynamicmechanical property of hybrid fiber reinforcedconcrete (HFRC) [J]. Journal of Wuhan Universityof Technology-Materials Science Edition, 2012, 27(4):783-788.
[5]	WOO W, EM V T, KIM E Y, et al. Stress-strain relationshipbetween ferrite and martensite in a dual-phasesteel studied by in-situ neutron diffraction and crystalplasticity theories [J]. Acta Materialia, 2012, 60(20):6972-6981.
[6]	SMITH R T, LOLLA T, GANDY D, et al. In-situ Xraydiffraction analysis of strain-induced transformationsin Fe- and Co-base hard facing alloys [J]. ScriptaMaterialia, 2015, 98: 60-63.
[7]	PAN B, QIAN K M, XIE H M, et al. Two-dimensionaldigital image correlation for in-plane displacement andstrain measurement: A review [J]. Measurement Scienceand Technology, 2009, 20: 062001.
[8]	PAN B, XIE H M, XU B Q, et al. Performance of subpixelregistration algorithms in digital image correlation[J]. Measurement Science and Technology, 2006,17: 1615-1621.
[9]	ZHAO J, ZHAO D. Investigation of strain measurementsusing digital image correlation with a finite elementmethod [J]. Journal of the Optical Society ofKorea, 2013, 17(5): 399-404.
[10]	CHOI I Y, KANG Y J, HONG K M, et al. Study onthe improvement of the image analysis speed in thedigital image correlation measurement system for the3-point bend test [J]. Journal of the Optical Society ofKorea, 2014, 18(5): 523-530.
[11]	UMEZAKI E, ICHIKAWA T. Measurement of deformationof epoxy resin plates with an embedded SMAwire using digital image correlation [J]. InternationalJournal of Modern Physics B, 2003, 17(8/9): 1750-1755.
[12]	S′ANCHEZ-AR′EVALO F M, PULOS G. Use of digitalimage correlation to determine the mechanical behaviorof materials [J]. Materials Characterization, 2008,59(11): 1572-1579.
[13]	JIN T L, LEE S H, GOO N S. Thermal stress measurementof a double ring structure using digital imagecorrelation method [J]. Experimental Techniques, 2013.Doi: 10.1111/ext.12053 (published online).
[14]	CARROLL J D, ABUZAID W, LAMBROS J, etal. High resolution digital image correlation measurementsof strain accumulation in fatigue crack growth[J]. International Journal of Fatigue, 2013, 57: 140-150.
[15]	PAN B, LI K. A fast digital image correlation methodfor deformation measurement [J]. Optics and Lasers inEngineering, 2011, 49(7): 841-847.
[16]	SCHREIER H W, SUTTON M A. Systematic errorsin digital image correlation due to undermatched subsetshape functions [J]. Experimental Mechanics, 2002,42(3): 303-310.
[17]	PAN B, XIE H M, GUO Z, et al. Full-field strainmeasurement using a two-dimensional Savitzky-Golaydigital differentiator in digital image correlation [J].Optical Engineering, 2007, 46(3): 033601.
[18]	PAN B, ASUNDI A, XIE H M, et al. Digital imagecorrelation using iterative least squares and point-wiseleast squares for displacement field and strain fieldmeasurements [J]. Optics and Lasers in Engineering,2009, 47(7): 865-874.
[19]	ZHOU P, GOODSON K E. Subpixel displacement anddeformation gradient measurement using digital image/speckle correlation (DISC) [J]. Optical Engineering,2001, 40(8): 1613-1620.