[1] Wong Y L, Lam L, Poon C S, et al. Properties of fly ash-modified cement mortar-aggregate interfaces [J].Cement and Concrete Research, 1999, 29(12): 1905-1913.[2] Stevula L, Madej J, Kozankova J, et al. Hydration products at the blast furnace slag aggregate-cement paste interface [J]. Cement and Concrete Research,1994, 24(3): 413-423.[3] Qian Chun-xiang, Huang Bei, Dong Hua. Influence of size and shape of aggregate and mineral admixture on interface of concrete [J]. Journal of Southeast University:Natural Science Edition, 2009, 39(4): 840-843(in Chinese).[4] Zheng Ke-ren, Sun Wei, Lin Wei, et al. Effects of blast furnace slag on micro-mechanical properties of interface transition zone [J]. Journal of Nanjing University of Aeronautics and Astronautics, 2008, 40(3):407-411 (in Chinese).[5] Kilinc?ale F M, Dogan G G. Performance of concretes produced with superplasticizer [J]. Journal of Applied Polymer Science, 2007, 103(5): 3214-3219.[6] Prokopski G, Halbiniak J. Interfacial transition zone in cementitious materials [J]. Cement and Concrete Research, 2000, 30(4): 579-583.[7] Shah S P, Li Z, Lange D A. Properties of aggregatecement interface for high performance concrete [C]//Proceedings of the 9th Conference on Engineering Mechanics.Texas, USA: ASCE, 1992: 852-855.[8] Larbi J A, Bijen J M. Orientation of calcium hydroxide at the Portland cement paste-aggregate interface in mortars in the presence of silica fume [J].Cement and Concrete Research, 1990, 20(3): 461-470.[9] Aligizaki K K, De R M R, Macdonald D D. Analysis of iron oxides accumulating at the interface between aggregates and cement paste [J]. Cement and Concrete Research, 2000, 30(12): 1941-1945.[10] Diamond S. Considerations in image analysis as applied to investigations of the ITZ in concrete [J].Cement and Concrete Composites, 2001, 23(2-3): 171-178.[11] Scrivener K L. Backscattered electron imaging of cementitious microstructures: Understanding and quantification [J]. Cement and Concrete Composites, 2004,26(8): 935-945.[12] Xing F, Quo X Y, Leng F G, et al. Study on distribution feature of fracture toughness of interface between coarse aggregate and hardened cement mortar in concrete[J]. Key Engineering Materials, 2006: 302-303,514-520.[13] Chen Hui-su, Sun Wei, Zhao Qing-xin. Analytical solution on the overestimation of thickness of interfacial transition zone around grain with arbitrary convex shape by the section analysis method [J]. Acta Materiae Compositae Sinica, 2006, 23(4): 155-163 (in Chinese).[14] Chen Wei, Tian Ya-po, Zhou Zi-chen. Carbonation of fly ash concrete and micro hardness analysis [J]. Journal of Wuhan University of Technology, 2009, 31(11):48-51 (in Chinese).[15] Igarashi S, Bentur A, Mindess S. Microhardness testing of cementitious materials [J]. Advanced Cement Based Materials, 1996, 4(2): 48-57.[16] Igarashi S, Bentur A, Mindess S. Characterization of the microstructure and strength of cement paste by micro hardness testing [J]. Advances in Cement Research,1996, 30(8): 87-92.[17] Glinicki M A, Zielinski M. Depth-sensing indentation method for evaluation of efficiency of secondary cementitious materials [J]. Cement and Concrete Research,2004, 34(4): 721-724.[18] Lian Li, Yin Hai-chun, Liao Wei-dong. Study on micro hardness of interface zone in cement concrete [J].Science and Technology of Overseas Building Materials,2005, 26(2): 8-11 (in Chinese).[19] Velez K, Maximilien S, Damidot D, et al. Determination by nano indentation of elastic modulus and hardness of pure constituents of Portland cement clinker [J]. Cement and Concrete Research, 2001,31(4): 555-561.[20] Yuan Run-zhang. Binding materials [M]. Wuhan:Press of Wuhan University of Technology, 1996 (in Chinese). |