[1] |
LIU X Y, ZHAI W M. Analysis of vertical dynamicwheel/rail interaction caused by polygonal wheels onhigh-speed trains [J]. Wear, 2014, 314(1/2): 282-290.
|
[2] |
LIU Y M, LI J Y, CAI Y L, et al. Current state and developmenttrend of rail grinding technology [J]. ChinaRailway Science, 2014, 35(4): 29-37 (in Chinese).
|
[3] |
CUERVO P A, SANTA J F, TORO A. Correlationsbetween wear mechanisms and rail grinding operationsin a commercial railroad [J]. Tribology International,2015, 82: 265-273.
|
[4] |
JIA J Z, SI D L. Target profile of rail grinding for smallradius curve of Shuohuang railway [J]. China RailwayScience, 2014, 35(4): 15-21 (in Chinese).
|
[5] |
MAGEL E E, KALOUSEK J. The application of contactmechanics to rail profile design and rail grinding[J]. Wear, 2002, 253(1/2): 308-316.
|
[6] |
ZHOU Q Y, ZHANG Y H, TIAN C H, et al. Profiledesign and test study of 60N rail [J]. China RailwayScience, 2014, 35(2): 128-135 (in Chinese).
|
[7] |
SHEN G, ZHONG X B. Implementations of newly developedwheel and rail profile design methods [J]. Journalof Traffic and Transportation Engineering, 2014,1(3): 221-227.
|
[8] |
PERSSON I, NILSSON R, BIK U, et al. Use of a geneticalgorithm to improve the rail profile on stockholmunderground [J]. Vehicle System Dynamics, 2010,48(sup1): 89-104.
|
[9] |
ZAKHAROV S, GORYACHEVA I, BOGDANOV V,et al. Problems with wheel and rail profiles selectionand optimization [J]. Wear, 2008, 265(9/10): 1266-1272.
|
[10] |
XIAO J L, LIU X Y. Design method of rail asymmetricsilhouette [J]. Journal of Southwest Jiaotong University,2010, 45(3): 361-365 (in Chinese).
|
[11] |
MA Y W, REN M F, HU G H, et al. Optimal analysison rail pre-grinding profile in high-speed railway [J].Journal of Mechanical Engineering, 2012, 48(8): 90-97 (in Chinese).
|
[12] |
PIEGL L, TILLER W. The NURBS book [M]. ZHAOG, MU G W, WANG L Z(trans). Beijing: TsinghuaUniversity Press, 2010 (in Chinese).
|
[13] |
ESPATH L F R, BRAUN A L, AWRUCH A M, et al.NURBS-based three-dimensional analysis of geometricallynonlinear elastic structures [J]. European Journalof Mechanics A/Solids, 2014, 47: 373-390.
|
[14] |
CHEN S P. Interpolation and application for cubicNURBS curves [J]. Mechanical Science and Technology,2001, 20(5): 692-693 (in Chinese).
|
[15] |
WANG K Y, ZHAI W M, CAI C B. The influence ofwheel/rail profile and the system parameters on thewheel/rail contact geometry relationship [J]. RailwayVehicles, 2002, 40(2): 14-18 (in Chinese).
|
[16] |
HOU C L, ZHAI W M, DENG R. Finite element analysisof the elastic-plastic contact of the worn wheelsand rails o curve [J]. China Railway Science, 2009,30(5): 28-33 (in Chinese).
|
[17] |
JIA G F, TAFLANIDIS A A. Kriging metamodelingfor approximation of high-dimensional wave and surgeresponses in real-time storm/hurricane risk assessment[J]. Computer Methods in Applied Mechanics and Engineering,2013, 261-262: 24-38.
|
[18] |
ZENG W, YANG Y, XIE H, et al. CF-Kriging surrogatemodel based on the combination forecastingmethod [J]. Journal of Mechanical Engineering Science,2016, 230(18): 3274-3284.
|
[19] |
ROSHANIAN J, EBRAHIMI M. Latin hypercubesampling applied to reliability-based multidisciplinarydesign optimization of a launch vehicle [J]. AerospaceScience and Technology, 2013, 28: 297-304.
|
[20] |
ZHU P, PAN F, CHEN W, et al. Lightweight designof vehicle parameters under crashworthiness using conservativesurrogates [J]. Computers in Industry, 2013,64(3): 280-289.
|
[21] |
XIE Y M, YU H P, CHEN J, et al. The reliability estimationbased on Kriging model [J]. Journal of ShanghaiJiao Tong University, 2007, 41(2): 177-180 (inChinese).
|
[22] |
ZHAO R G, LI J J. NSGA-II algorithm and its improvement[J]. Control Engineering of China, 2009,16(supl): 61-63 (in Chinese).
|