[1] Schuerz S, Fleischanderl M, Luckeneder G H, et al. Corrosion behavior of Zn-Al-Mg coated steel sheet in sodium chloride-containing environment [J].Corrosion Science, 2009, 51(10): 2355-2363. [2] Sch¨urz S, Luckeneder G H, Fleischanderl M, et al. Chemistry of corrosion products on Zn-Al-Mg alloy coated steel [J]. Corrosion Science, 2010, 52(10):3271-3279. [3] Morimoto Y, Honda K, Nishimura K, et al. Excellent corrosion-resistant Zn-Al-Mg-Si alloy hot-dip galvanized steel sheet “Super Dyma” [J]. Nippon Steel Technical Report, 2003, 87(1): 24-26. [4] Edavan R P, Kopinski R. Corrosion resistance of painted zinc alloy coated steels [J]. Corrosion Science,2009, 51(10): 2429-2442. [5] Li Qian, Zhao Yang-zi, Luo Qun, et al. Experimental study and phase diagram calculation in Al-Zn-Mg-Si quaternary system [J]. Journal of Alloys and Compounds,2010, 501(2): 282-290. [6] Jiang L, Volovitch P, Wolpers M, et al. Activation and inhibition of Zn-Al and Zn-Al-Mg coatings on steel by nitrate in phosphoric acid solution [J]. Corrosion Science, 2012, 60(7): 256-264. [7] Commenda C, P¨uhringer J. Microstructural characterization and quantification of Zn-Al-Mg surface coatings [J]. Materials Characterization, 2010, 61(10):943-951. [8] Dutta M, Halde A K, Singh S B. Morphology and properties of hot dip Zn-Mg and Zn-Mg-Al alloy coatings on steel sheet [J]. Surface and Coatings Technology,2010, 205(7): 2578-2584. [9] Honda K, Ushioda K, Yamada W. Influence of Si addition to the coating bath on the growth of Al-Fe alloy layers in hot-dip Zn-Al-Mg alloy-coated steel sheets [J]. Iron and Steel Institute of Japan, 2011, 97(1): 19-25 (in Japanese). [10] Klein J, Schneider J, Muske M, et al. Aluminuminduced crystallization of amorphous silicon: Influence of the aluminum layer on the process [J]. Thin Solid Films, 2004, 451-452(22): 481-484. [11] Nomura H, Kimata Y, Kanai H. Corrosion resistance of prepainted Zn-11%Al-3%Mg-0.2%Si coated steel sheet [C]//Galvatech 2004 Conference Proceedings.Chicago, American: Local Organizing Committee,2004: 761-770. [12] Wattiez B, Gourgues A F, Deschamps A, et al. Experimental investigation of microstructure and ageing behaviour of bulk Zn-(1-18)%Al-(0-0.06)%Mg alloys [J]. Materials Science and Engineering, 2010,A527(29-30): 7901-7911. [13] Zhu Y H, Man H C, LeeWB. Exothermic reaction in eutectoid Zn-Al based alloys [J]. Materials Science and Engineering, 1999, A268(1-2): 147-153. [14] Sandoval-Jimenez A, Negrete J, Torres-Villasenor G. The triclinic high temperature modification of the α phase of the Zn-Al system [J].Mater Research Bulletin, 1999, 34(14-15): 2291-2296. [15] Sandoval-Jimenez A, Negrete J, Torres-Villasenor G. Phase transformations in the Zn-Al eutectoid alloy after quenching from the high temperature triclinic beta phase [J]. Materials Characterization, 2010, 61(11): 1286-1289.
|