Simulation of Excess Pore Water Pressure During
Deep Soil Mixing Columns Installing

doi:10.1007/s12204-012-1298-5

摘要/Abstract

摘要： Most of current studies of deep soil mixing (DSM) methods are focused on the soil strength improvement and soil treatment effectiveness. But the DSM installation leads to excess pore water pressure and soil disturbance, which will bring great harm to adjacent structures, such as shell tunnels and historic buildings. The procedure of excess pore water pressure buildup while large number DSM columns are installed is complicated. In order to find methods to predict and simulate the excess pore water pressure during DSM column installation, the complicated dissipation and buildup of excess pore water pressure through in-situ test are studied in this paper. In-situ test was conducted in soft clay near the Huangpu River in Shanghai. The pore water pressure was investigated by an automatic monitoring system. Test results indicate that the excess pore water pressure induced by one DSM column installation is composed of the compaction pressure and the reversing pressure. The empirical equations of excess pore water pressure dissipation and buildup were built by mathematical fitting methods. A compound method is proposed to simulate the excess pore water pressure due to DSM installation. Using this method to predict the excess pore water pressure in the situ test, results show a well agreement between the prediction and the measurements.

关键词: deep soil mixing (DSM), installation, in-situ test, simulation, excess pore water pressure, prediction

Abstract: Most of current studies of deep soil mixing (DSM) methods are focused on the soil strength improvement and soil treatment effectiveness. But the DSM installation leads to excess pore water pressure and soil disturbance, which will bring great harm to adjacent structures, such as shell tunnels and historic buildings. The procedure of excess pore water pressure buildup while large number DSM columns are installed is complicated. In order to find methods to predict and simulate the excess pore water pressure during DSM column installation, the complicated dissipation and buildup of excess pore water pressure through in-situ test are studied in this paper. In-situ test was conducted in soft clay near the Huangpu River in Shanghai. The pore water pressure was investigated by an automatic monitoring system. Test results indicate that the excess pore water pressure induced by one DSM column installation is composed of the compaction pressure and the reversing pressure. The empirical equations of excess pore water pressure dissipation and buildup were built by mathematical fitting methods. A compound method is proposed to simulate the excess pore water pressure due to DSM installation. Using this method to predict the excess pore water pressure in the situ test, results show a well agreement between the prediction and the measurements.

Key words: deep soil mixing (DSM), installation, in-situ test, simulation, excess pore water pressure, prediction

中图分类号:

TU 46
TU 473

ZHANG Jun-feng (张俊峰), CHEN Jin-jian (陈锦剑), WANG Jian-hua (王建华). Simulation of Excess Pore Water Pressure During Deep Soil Mixing Columns Installing[J]. 上海交通大学学报（英文版）, 2012, 17(4): 401-407.

ZHANG Jun-feng (张俊峰), CHEN Jin-jian (陈锦剑), WANG Jian-hua (王建华). Simulation of Excess Pore Water Pressure During Deep Soil Mixing Columns Installing[J]. Journal of shanghai Jiaotong University (Science), 2012, 17(4): 401-407.

参考文献

[1] Zheng G, Liu S Y, Chen R P. State of advancement of column-type reinforcement element and its application
in China [C]// Proceedings of the 2009 US-China Workshop on Ground Improvement Technologies. Orlando,
USA: Geotechnical Special Publication, 2009: 12-25.
[2] Dasenbrock D. Application of deep mixing method to a challenging bridge construction project: The glen
road interchange [C]// Innovations in Grouting and Soil Improvement, Geo-Frontiers 2005. Austin, USA:
Geotechnical Special Publication, 2005: 1777-1786.
[3] Maher A, Schaefer V, Yang D, et al. In-situ deep soil mixing for solidification of soft estuarine sediments
— Shear strength [C]// Proceedings of Sessions of GeoCongress 2008: Geotechnics of Waste Management
and Remediation. New Orleans, USA: Geotechnical Special Publication, 2008: 668-675.
[4] ORourke T D, McGinn A J. Case history of deep mixing soil stabilization for Boston Central
Artery [C]// Geotechnical Engineering for Transportation Projects: Proceedings of GeoTrans 2004. Los Angeles,
USA: Geotechnical Special Publication, 2004:77-136.
[5] Hu Z F, Yue Z Q, Zhou J, et al. Design and construction of a deep excavation in soft soils adjacent to
the Shanghai Metro tunnels [J]. Canadian Geotechnical Journal, 2003, 40(5): 933-948.
[6] Zhu Lei. Monitored adjacent tunnel displacement induced by soil cement column installation [J]. Railway
Engineering, 2007, 2: 46-47 (in Chinese).
[7] Pan Xing-zhuang, Pan Jian-hua, XuWei-cheng. Effect of deep mixing pile construction on environment [J].
Dam Observation and Geotechnical Tests, 2001, 25(1):46-49 (in Chinese).
[8] Liu Tao, Liu Guo-bin, Shi Shi-yong. Displacement of subway tunnels induced by above foundation pit reinforcement
[J]. Journal of Harbin Institute of Technology, 2009, 141 (2): 141-144 (in Chinese).
[9] Fu Yan-bin, Liao Shao-ming, Zhu He-hua. Soil squeezing effect of DCM pile and its application to subway
tunnel [J]. Rock and Soil Mechanics, 2009, 30(7):2005-2010 (in Chinese).
[10] Sariosseiri F, Muhunthan B. Effect of cement treatment on geotechnical properties of some Washington
State soils [J]. Engineering Geology, 2009, 104(1-2): 119-125.
[11] Shen S L, Han J, Du Y J. Deep mixing induced property changes in surrounding sensitive marine clays [J].
Journal of Geotechnical and Geoenvironmental Engineering,2008, 134(6): 845-854.
[12] Massoudi N. Jet grouting for support of excavations near historic structures [C]// Proceedings of Session of
GeoCongress 2008: Geosustainability and Geohazard Mitigation. Orleans, USA: Geotechnical Special Publication, 2008: 955-959.
[13] Shen S L, Miura N, Koga H. Interaction mechanism between deep mixing column and surrounding clay
during installation [J]. Canadian Geotechnical Journal, 2003, 40(2): 293-307.
[14] Guan Yun-fei, Zhao Wei-bing, Yu Jin. Excess pore water pressure around deep mixing column in soft
clay [J]. Chinese Journal of Solid Mechanics, 2008, 29(Sup): 122-126 (in Chinese).

编辑推荐 0

Metrics

阅读次数

全文

412

HTML			PDF

最新录用	在线预览	正式出版	最新录用	在线预览	正式出版
0	0	0	0	0	412

来源	本网站	其他网站

次数	4	408
比例	1%	99%

摘要

1668

最新录用	在线预览	正式出版

0	0	1668

来源	本网站	其他网站

次数	253	1415
比例	15%	85%

[1]	CHEN Feier (陈飞儿), ZHAO Qiyuan (赵祺源), CAO Mingming (曹明明), CHEN Jiayi (陈嘉屹), FU Guiyuan (傅桂元). Adaptive Agent-Based Modeling Framework for Collective Decision-Making in Crowd Building Evacuation[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 522-533.
[2]	JING Mengjie (荆梦杰), CUI Zhixin (崔志鑫), FU Hang (傅航), CHEN Xiaojun (陈晓军). Real-Time Deformation Simulation of Kidney Surgery Based on Virtual Reality[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 290-297.
[3]	AKAMPUMUZA Obed, WU Jiajun (吴佳骏), QUAN Zhenzhen (权震震), QIN Xiaohong (覃小红). Simulation of Bimodal Fiber Distribution Effect on Transient Accumulation of Particles During Filtration[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 176-185.
[4]	ZENG Judan (曾巨丹), CAO Wenjiao (曹文娇), WANG Lihua (王丽华) . Recent Advances and Future Directions of Diagnostic and Prognostic Prediction Models in Ovarian Cancer[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 10-16.
[5]	ZHANG Xue, CUI Hao, LUO Qianyue, ZHANG Hui . Nonlinear Distributed Model Predictive Control for Multiple Missiles Against Maneuvering Target with a Trajectory Predictor[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 779-789.
[6]	KOU Haixia, AN Zongwen, MA Qiang, GUO Xu. Lifetime Prediction of Wind Turbine Blade Based on Full-Scale Fatigue Testing [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 755-761.
[7]	GUO Longlong, WU Zebing, HE Yutian, WEI Wenlan, XIA Shengyong, JU Luyan, WANG Bo , ZHANG Yong . Prediction of Formation Quality of Inconel 625 Clads Using Support Vector Regression[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 746-754.
[8]	CHENG Daolai, XU Lei, SUN Xiaojie . Vibration of Axle Box from Wheel Diameter Difference in Vehicle[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(4): 509-518.
[9]	WEN Xiaofei, ZHOU Ruiping, YUAN Qiang, LEI Junsong . Coupling Mathematical Model of Marine Propulsion Shafting in Steady Operating State[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(4): 463-469.
[10]	GUO Wenqiang (郭文强), SUN Pengwen (孙鹏文), NIU Lei (牛磊), WANG Zongtao (王宗涛). Fatigue Life Analysis of Longitudinal Welding Seam for Wind Turbine Tower[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(2): 261-265.
[11]	LI Sijia (李斯佳), SONG Kun (宋琨), YANG Boran (杨博然), GAO Yucen (高宇岑), GAO Xiaofeng (. Preliminary Assessment of the COVID-19 Outbreak Using 3-Staged Model e-ISHR[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(2): 157-164.
[12]	ZHOU Lingyun (周凌云), WU Kaiwei (吴凯伟), LIU Hanzhi (刘涵之), GAO Yuanning (高远宁), GAO X. CIRD-F: Spread and Influence of COVID-19 in China[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(2): 147-156.
[13]	ZHOU Jian (周剑), YANG Qidong (杨启东), ZHANG Xiaofei (张小飞), HAN Chong (韩崇), SUN Lij. Traffic Prediction Method for GEO Satellites Combining ARIMA Model and Grey Model[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(1): 65-69.
[14]	YAN Shuai (闫帅), CAI Daolin (蔡道林), CHEN Yifeng (陈一峰), XUE Yuan (薛媛), LIU. Reliability Modelling and Prediction Method for Phase Change Memory Using Optimal Pulse Conditions[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(1): 1-9.
[15]	ZHOU Feng (周峰), ZHANG Zixu (张紫旭), WU Chang (武畅), TIAN Xin (田鑫), LIU Haotian (刘昊天. Optimization of Numerical Control Program and Machining Simulation Based on VERICUT[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(6): 763-768.