压头半径对岩石点荷载试验影响的数值仿真研究

doi:10.1007/s12204-023-2583-1

J Shanghai Jiaotong Univ Sci ›› 2024, Vol. 29 ›› Issue (5): 909-918.doi: 10.1007/s12204-023-2583-1

压头半径对岩石点荷载试验影响的数值仿真研究

王智1，欧阳义平1，杨启1,2

（1. 上海交通大学海洋工程国家重点实验室；高新船舶与深海开发装备协同创新中心，上海 200240；2. 上海交大海洋水下工程科学研究院有限公司，上海 200231）

收稿日期:2021-10-08 接受日期:2021-10-22 出版日期:2024-09-28 发布日期:2024-09-28

Numerical Simulation on Effect of Indenter Radius During Point Load Test

WANG Zhi¹ (王智), OUYANG Yiping¹ (欧阳义平), YANG Qi^1,2∗ (杨启)

(1. State Key Laboratory of Ocean Engineering; Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai Jiao Tong University, Shanghai 200240, China; 2. Shanghai Jiao Tong University Underwater Engineering Institute Co., Ltd., Shanghai 200231, China)

Received:2021-10-08 Accepted:2021-10-22 Online:2024-09-28 Published:2024-09-28

摘要/Abstract

摘要： 为探明点荷载试验中压头半径对试验结果的影响，采用基于平直节理接触的离散元模型进行数值仿真研究。研究结果表明：基于平直节理的离散元模型能够准确呈现岩石在点荷载作用下的破坏过程和尺寸效应；在不同半径的压头加载作用下，岩样破坏形式均为竖向劈裂破坏，且压头半径越大，破坏面积越大；岩样点荷载强度的测量值随着压头半径的增大而增大，服从幂函数关系。研究结果可为点荷载试验中压头的选择、机械破岩中刀具的设计提供理论依据。

关键词: 离散元法, 平直节理模型, 点荷载强度, 尺寸效应

Abstract: To investigate the effect of the radius of the spherical heads of the indenter on the results of a point load test, this study uses a discrete element model based on the flat joint contact for numerical simulation. Results show that the discrete element model based on the flat joint model can accurately describe the damage process and size effects of rocks under point loads. Damage of rock samples under the loading of different radii of the indenter can be characterized as vertical splitting damage, and the larger the radius of the indenter is, the larger the damage area. Values of the point load strength of rock samples increase with increasing the radius of the indenter and obey a power function relationship. The results of this study provide a theoretical basis for the selection of the spherical heads of indenters in point load tests and tool design for mechanical rock breaking.

中图分类号:

TU 45

王智1, 欧阳义平1, 杨启1, 2. 压头半径对岩石点荷载试验影响的数值仿真研究[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(5): 909-918.

WANG Zhi¹ (王智), OUYANG Yiping¹ (欧阳义平), YANG Qi^{1, 2∗} (杨启). Numerical Simulation on Effect of Indenter Radius During Point Load Test[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(5): 909-918.

参考文献

[1] LIU Q S, ZHAO Y F, ZHANG X P, et al. Study and discussion on point load test for evaluating rock strength of TBM tunnel constructed in limestone [J]. Rock and Soil Mechanics, 2018, 39(3): 977-984 (in Chinese).
[2] PANEK L A, FANNON T A. Size and shape effects in point load tests of irregular rock fragments [J]. Rock Mechanics and Rock Engineering, 1992, 25: 109-140.
[3] CHAU K T, WEI X X. A new analytic solution for the diametral point load strength test on finite solid circular cylinders [J]. International Journal of Solids and Structures, 2001, 38(9):1459-1481.
[4] MASOUMI H, SAYDAM S, HAGAN P C. Unified sizeeffect law for intact rock [J]. International Journal of Geomechanics, 2016, 16(2): 04015054.
[5] CHEN P Y, KONG Y, YU H M. Research on the calibration method of microparameters of a uniaxial compression PFC2D model for rock [J]. Chinese Journal of Underground Space and Engineering, 2018, 14(5):1240-1249 (in Chinese).
[6] POTYONDY D O. A flat-jointed bonded-particle material for hard rock [C]//46th U.S. Rock Mechanics/Geomechanics Symposium. Chicago: American Rock Mechanics Association, 2012: ARMA-2012-501.
[7] DING X B, ZHANG L Y. A new contact model to improve the simulated ratio of unconfined compressive strength to tensile strength in bonded particle models [J]. International Journal of Rock Mechanics and Mining Sciences, 2014, 69: 111-119.
[8] DU G S, CHEN S J, GAO Z W. Estimation of uniaxial strength of iron ore by point load test based on PFC [J]. China Mining Magazine, 2019, 28(S2): 406-410 (in Chinese).
[9] BAHAADDINI M, SHEIKHPOURKHANI A M, MANSOURI H. Flat-joint model to reproduce the mehanical behaviour of intact rocks [J]. European Journal of Environmental and Civil Engineering, 2021, 25(8): 1427-1448.
[10] OUYANG Q A. Laboratory experiments and distinct element method research on quasi-static and dynamic mechanical properties of ice [D]. Tianjin: Tianjin University, 2017 (in Chinese).
[11] POULSEN B A, ADHIKARY D P. A numerical study of the scale effect in coal strength [J]. International Journal of Rock Mechanics and Mining Sciences, 2013,63: 62-71.
[12] OUYANG Y P, YANG Q, CHEN X Q. Bonded-particle model with nonlinear elastic tensile stiffness for rocklike materials [J]. Applied Sciences, 2017, 7(7): 686.
[13] XU J M, HUANG D Y, ZHU H C. Relations between macro- and meso-scopic mechanical parameters of granite based on actual distributions of mesocompositions [J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(S1): 2635-2643 (in Chinese).
[14] FU Z L. Experiment course on rock mechanics [M]. Beijing: Chemical Industry Press, 2011 (in Chinese).

压头半径对岩石点荷载试验影响的数值仿真研究

Numerical Simulation on Effect of Indenter Radius During Point Load Test

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价

[1]	毛佳, 肖景文, 赵兰浩, 底瑛棠. 基于浸入边界法的高解析度CFD-DEM流固耦合方法[J]. 上海交通大学学报, 2023, 57(8): 988-995.
[2]	胡安峰, 南博文, 陈缘, 付鹏. 基于砂土刚度衰减模型的修正p-y曲线法[J]. 上海交通大学学报, 2020, 54(12): 1316-1323.
[3]	傅慧萍a,b，李杰b. 微气泡减阻的数值模拟方法及尺寸效应[J]. 上海交通大学学报（自然版）, 2016, 50(02): 278-282.