基于光谱特征的铝合金钨极气体保护焊气孔在线检测

doi:10.1007/s12204-022-2495-5

J Shanghai Jiaotong Univ Sci ›› 2024, Vol. 29 ›› Issue (2): 339-348.doi: 10.1007/s12204-022-2495-5

基于光谱特征的铝合金钨极气体保护焊气孔在线检测

蒋浩强，陈善本，许靖远

（上海交通大学材料科学与工程学院，上海200240）

收稿日期:2021-11-16 接受日期:2021-12-13 出版日期:2024-03-28 发布日期:2024-03-28

On-Line Detection of Porosity in Gas Tungsten Arc Welding of Aluminum Alloy Based on Spectrum Features

JIANG Haoqiang (蒋浩强), CHEN Shanben^* (陈善本), XU Jingyuan (许靖远)

(School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China)

Received:2021-11-16 Accepted:2021-12-13 Online:2024-03-28 Published:2024-03-28

摘要/Abstract

摘要： 焊接过程中气孔率的实时检测是智能焊接制造中需要解决的一个重要问题。提出了一种基于电弧谱的机器人弧焊铝合金孔隙率在线检测方法。首先，利用k-shape和改进的k-means对预处理后的弧谱进行初始特征选择，降低数据维数；其次，根据特征的重要度进行二次特征选择，进一步降低特征冗余；然后，将最终特征参数与焊缝X射线图像相结合，建立最优样品标签库。最后，提出了一种基于光梯度增强机（LightGBM）的铝合金钨极气体保护焊气孔率在线检测方法。与极端梯度增强（XGBoost）和分类增强（CatBoost）相比，该方法可以获得更好的检测性能。本文提出的新方法可用于其他焊接缺陷的检测，有助于智能焊接技术的发展。

关键词: 孔隙度检测，机器人弧焊，电弧谱

Abstract: The real-time detection of porosity in welding process is an important problem to be solved in intelligent welding manufacturing. A new on-line detection method for porosity of aluminum alloy in robotic arc welding based on arc spectrum is proposed in this paper. First, k-shape and the improved k-means were used for the initial feature selection of the preprocessed arc spectrum to reduce the data dimension. Second, the secondary feature selection was carried out based on the importance of features to further reduce feature redundancy. Then, the optimal sample label library was established by combining the final characteristic parameters and the X-ray pictures of welds. Finally, an on-line detection method of porosity in gas tungsten arc welding of aluminum alloy based on light gradient boosting machine (LightGBM) was proposed. Compared with extreme gradient boosting(XGBoost) and categorical boosting (CatBoost), this method can achieve better detection performance. The new method proposed in this paper can be used to detect other welding defects, which is helpful to the development of intelligent welding technology.

Key words: porosity detection, robotic arc welding, arc spectrum

中图分类号:

TG441.7

蒋浩强，陈善本，许靖远. 基于光谱特征的铝合金钨极气体保护焊气孔在线检测[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 339-348.

JIANG Haoqiang (蒋浩强), CHEN Shanben^* (陈善本), XU Jingyuan (许靖远). On-Line Detection of Porosity in Gas Tungsten Arc Welding of Aluminum Alloy Based on Spectrum Features[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 339-348.

参考文献

[1] CHEN S B, LV N. Research evolution on intelligentized technologies for arc welding process [J]. Journal of Manufacturing Processes, 2014, 16(1): 109-122.
[2] RYAZANTSEV V I, FEDOSEEV V A. Metallurgical and technological porosity of aluminium alloys in arc welding [J]. Welding International, 2002, 16(4): 320-324.
[3] KUTSUNA M, YAN Q. Study on porosity formation in laser welds in aluminium alloys (Report 1): Effects of hydrogen and alloying elements [J]. Welding International, 1998, 12(12): 937-949.
[4] CHEN Q H, GE H L, YANG C L, et al. Study on pores in ultrasonic-assisted TIG weld of aluminum alloy [J]. Metals, 2017, 7(2): 53.
[5] XIAO R S, ZHANG X Y. Problems and issues in laser beam welding of aluminum-lithium alloys [J]. Journal of Manufacturing Processes, 2014, 16(2): 166-175.
[6] ALAKNANDA, ANAND R S, KUMAR P. Flaw detection in radiographic weld images using morphological approach [J]. NDT & E International, 2006, 39(1): 29-33.
[7] ZHANG Z F, CHEN H B, XU Y L, et al. Multisensorbased real-time quality monitoring by means of feature extraction, selection and modeling for Al alloy in arc welding [J]. Mechanical Systems and Signal Processing, 2015, 60/61: 151-165.
[8] MIRAPEIX J, RUIZ-LOMBERA R, VALDIANDE J J, et al. Defect detection with CCD-spectrometer and photodiode-based arc-welding monitoring systems [J]. Journal of Materials Processing Technology, 2011, 211(12): 2132-2139.
[9] LI Z Y, WANG B, DING J B. Detection of GTA welding quality and disturbance factors with spectral signal of arc light [J]. Journal of Materials Processing Technology, 2009, 209(10): 4867-4873.
[10] ZHAO Z, GUO Y T, BAI L F, et al. Quality monitoring in wire-arc additive manufacturing based on cooperative awareness of spectrum and vision [J]. Optik, 2019, 181: 351-360.
[11] YU H W, XU Y L, LV N, et al. Arc spectral processing technique with its application to wire feed monitoring in Al-Mg alloy pulsed gas tungsten arc welding [J]. Journal of Materials Processing Technology, 2013, 213(5): 707-716.
[12] YU H W, XU Y L, SONG J Q, et al. On-line monitor of hydrogen porosity based on arc spectral information in Al-Mg alloy pulsed gas tungsten arc welding [J]. Optics & Laser Technology, 2015, 70: 30-38.
[13] HUANG Y M, WU D, LV N, et al. Investigation of porosity in pulsed GTAW of aluminum alloys based on spectral and X-ray image analyses [J]. Journal of Materials Processing Technology, 2017, 243: 365-373.
[14] ZHANG Z F, YU H W, LV N, et al. Real-time defect detection in pulsed GTAW of Al alloys through online spectroscopy [J]. Journal of Materials Processing Technology, 2013, 213(7): 1146-1156.
[15] ZHANG Z F, YANG Z, REN W J, et al. Random forest-based real-time defect detection of Al alloy in robotic arc welding using optical spectrum [J]. Journal of Manufacturing Processes, 2019, 42: 51-59.
[16] SUN L X, YU H B. Automatic estimation of varying continuum background emission in laser-induced breakdown spectroscopy [J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 2009, 64(3): 278-287.
[17] SUN X L, LIU M X, SIMA Z Q. A novel cryptocurrency price trend forecasting model based on LightGBM [J]. Finance Research Letters, 2020, 32: 101084.
[18] TANG M Z, ZHAO Q, DING S X, et al. An improved LightGBM algorithm for online fault detection of wind turbine gearboxes [J]. Energies, 2020, 13(4): 807.
[19] ZHANG Y Y, ZHU C F, WANG Q R. LightGBMbased model for metro passenger volume forecasting [J]. IET Intelligent Transport Systems, 2020, 14(13): 1815-1823.
[20] MA M H, ZHAO G, HE B S, et al. XGBoost-based method for flash flood risk assessment [J]. Journal of Hydrology, 2021, 598: 126382.
[21] CHEN K, CHEN H B, LIU L, et al. Prediction of weld bead geometry of MAG welding based on XGBoost algorithm [J]. International Journal of Advanced Manufacturing Technology, 2019, 101(9/10/11/12): 2283-2295.
[22] HUANG G M, WU L F, MA X, et al. Evaluation of CatBoost method for prediction of reference evapotranspiration in humid regions [J]. Journal of Hydrology, 2019, 574: 1029-1041.
[23] LEE S, VO T P, THAI H T, et al. Strength prediction of concrete-filled steel tubular columns using Categorical Gradient Boosting algorithm [J]. Engineering Structures, 2021, 238: 112109.

基于光谱特征的铝合金钨极气体保护焊气孔在线检测

On-Line Detection of Porosity in Gas Tungsten Arc Welding of Aluminum Alloy Based on Spectrum Features

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价