Weld Geometry Monitoring for Metal Inert Gas Welding Process with Galvanized Steel Plates Using Bayesian Network

doi:10.1007/s12204-020-2234-8

J Shanghai Jiaotong Univ Sci ›› 2021, Vol. 26 ›› Issue (2): 239-244.doi: 10.1007/s12204-020-2234-8

Weld Geometry Monitoring for Metal Inert Gas Welding Process with Galvanized Steel Plates Using Bayesian Network

MA Guohong (马国红), LI Jian (李健), HE Yinshui (何银水), XIAO Wenbo (肖文波)

(1. Key Laboratory of Lightweight and High Strength Structural Materials of Jiangxi Province, School of Mechanical and
Electrical Engineering, Nanchang University, Nanchang 330031, China; 2. School of Environment and Chemical
Engineering, Nanchang University, Nanchang 330031, China; 3. Key Laboratory of Nondestructive Testing Ministry of
Education, Nanchang Hangkong University, Nanchang 330063, China)

出版日期:2021-04-28 发布日期:2021-03-24
通讯作者: HE Yinshui (何银水) E-mail:heyingshui117@163.com

Weld Geometry Monitoring for Metal Inert Gas Welding Process with Galvanized Steel Plates Using Bayesian Network

MA Guohong (马国红), LI Jian (李健), HE Yinshui (何银水), XIAO Wenbo (肖文波)

(1. Key Laboratory of Lightweight and High Strength Structural Materials of Jiangxi Province, School of Mechanical and
Electrical Engineering, Nanchang University, Nanchang 330031, China; 2. School of Environment and Chemical
Engineering, Nanchang University, Nanchang 330031, China; 3. Key Laboratory of Nondestructive Testing Ministry of
Education, Nanchang Hangkong University, Nanchang 330063, China)

Online:2021-04-28 Published:2021-03-24
Contact: HE Yinshui (何银水) E-mail:heyingshui117@163.com

摘要/Abstract

摘要： We present a novel method to monitor the weld geometry for metal inert gas (MIG) welding process with galvanized steel plates using Bayesian network (BN), and propose an effective method of extracting the weld reinforcement and width online. The laser vision sensor is mounted after the welding torch and used to profile the weld. With the extracted weld geometry and the adopted process parameters, a back propagation neural network (BPNN) is constructed offline and used to predict the weld reinforcement and width corresponding to the current parameter settings. A BN from welding experience and tests is presented to implement the decision making of welding current/voltage when the error between the predictive geometry and the actual one occurs. This study can deal with the negative welding tendency to adapt to welding randomness and indicates a valuable application prospect in the welding field.

关键词: galvanized steel plate, weld geometry, laser vision sensor, Bayesian network (BN), back propagation
neural network (BPNN)

Abstract: We present a novel method to monitor the weld geometry for metal inert gas (MIG) welding process with galvanized steel plates using Bayesian network (BN), and propose an effective method of extracting the weld reinforcement and width online. The laser vision sensor is mounted after the welding torch and used to profile the weld. With the extracted weld geometry and the adopted process parameters, a back propagation neural network (BPNN) is constructed offline and used to predict the weld reinforcement and width corresponding to the current parameter settings. A BN from welding experience and tests is presented to implement the decision making of welding current/voltage when the error between the predictive geometry and the actual one occurs. This study can deal with the negative welding tendency to adapt to welding randomness and indicates a valuable application prospect in the welding field.

Key words: galvanized steel plate, weld geometry, laser vision sensor, Bayesian network (BN), back propagation
neural network (BPNN)

中图分类号:

MA Guohong (马国红), LI Jian (李健), HE Yinshui (何银水), XIAO Wenbo (肖文波). Weld Geometry Monitoring for Metal Inert Gas Welding Process with Galvanized Steel Plates Using Bayesian Network[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 239-244.

参考文献 15

[1]	JEONG H, PARK K, KIM Y, et al. Numerical analysis of weld pool for galvanized steel with lap joint in GTAW [J]. Journal of Mechanical Science and Technology,2017, 31(6): 2975-2983.
[2]	LEKBIR C, DAHOUN N, GUETITECH A, et al. Effect of immersion time and cooling mode on the electrochemical behavior of hot-dip galvanized steel in sulfuric acid medium [J]. Journal of Materials Engineering and Performance, 2017, 26(6): 2502-2511.
[3]	DI SARLI A R, CULCASI J D, TOMACHUK C R, et al. A conversion layer based on trivalent chromium and cobalt for the corrosion protection of electrogalvanized steel [J]. Surface & Coatings Technology, 2014, 258:426-436.
[4]	THAKUR A G, NANDEDKAR V M. Optimization of the resistance spot welding process of galvanized steel sheet using the Taguchi method [J]. Arabian Journal for Science and Engineering, 2014, 39(2): 1171-1176.
[5]	MIRZA F A, MACWAN A, BHOLE S D, et al. Microstructure and fatigue properties of ultrasonic spot welded joints of aluminum 5754 alloy [J]. JOM: The Journal of The Minerals, Metals & Materials Society(TMS), 2016, 68(5): 1465-1475.
[6]	CHEN Z C, YANG S L, WANG C M, et al. A study of fiber laser welding of galvanized steel using a suction method [J]. Journal of Materials Processing Technology,2014, 214(7): 1456-1465.
[7]	MEI L F, YAN D B, CHEN G Y, et al. Influence of laser beam incidence angle on laser lap welding quality of galvanized steels [J]. Optics Communications, 2017,402: 147-158.
[8]	SHAOWJ, HUANG Y, ZHANG Y. A novel weld seam detection method for space weld seam of narrow butt joint in laser welding [J]. Optics and Laser Technology,2018, 99: 39-51.
[9]	SINGH A, COOPER D E, BLUNDELL N J, et al.Modelling of weld-bead geometry and hardness profile in laser welding of plain carbon steel using neural networks and genetic algorithms [J]. International Journal of Computer Integrated Manufacturing, 2014, 27(7):656-674.
[10]	LEE H J, JI C W, YU J Y. Effects of welding current and torch position parameters on bead geometry in cold metal transfer welding [J]. Journal of Mechanical Science and Technology, 2018, 32(9): 4335-4343.
[11]	XIONG J, ZHANG G J, HU J W, et al. Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a second-order regression analysis [J]. Journal of Intelligent Manufacturing,2014, 25(1): 157-163.
[12]	CHEN C, LIU X M, CHEN H H. A rear-end collision risk evaluation and control scheme using a Bayesian network model [J]. IEEE Transactions on Intelligent Transportation Systems, 2018, 20(1): 264-282.
[13]	HAO Z N, XU Z S, ZHAO H, et al. A dynamic weight determination approach based on the intuitionistic fuzzy Bayesian network and its application to emergency decision making [J]. IEEE Transactions on Fuzzy Systems, 2018, 26(4): 1893-1907.
[14]	NABIPOUR M, KESHAVARZ P. Modeling surface tension of pure refrigerants using feed-forward backpropagation neural networks [J]. International Journal of Refrigeration, 2017, 75: 217-227.
[15]	BEUZEN T, SPLINTER K D, MARSHALL L A, et al.Bayesian networks in coastal engineering: Distinguishing descriptive and predictive applications [J]. Coastal Engineering, 2018, 135: 16-30.

Weld Geometry Monitoring for Metal Inert Gas Welding Process with Galvanized Steel Plates Using Bayesian Network

Weld Geometry Monitoring for Metal Inert Gas Welding Process with Galvanized Steel Plates Using Bayesian Network

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 15

相关文章 2

编辑推荐

Metrics

本文评价

[1]	LI Dan (李丹), WANG Hongdong (王鸿东), LIANG Xiaofeng *(梁晓锋). Bayesian Network Based Approach for Diagnosis of Modified Sequencing Batch Reactor[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(4): 417-429.
[2]	REN Fang-yu (任方宇), SI Shu-bin* (司书宾), CAI Zhi-qiang (蔡志强), ZHANG Shuai (张帅). Transformer Fault Analysis Based on Bayesian Networks and Importance Measures[J]. 上海交通大学学报（英文版）, 2015, 20(3): 353-357.