Multi-Objective Optimization for Structure Crashworthiness Based on Kriging Surrogate Model and Simulated Annealing Algorithm

doi:10.1007/s12204-020-2223-y

摘要/Abstract

摘要： Multi-objective optimization of crashworthiness in automobile front-end structure was performed, and finite element model (FEM) was validated by experimental results to ensure that FEM can predict the response value with sufficient accuracy. Seven design variables and four crashworthiness indicators were defined. Through orthogonal design method, 18 FEMs were established, and the response values of crashworthiness indicators were extracted. By using the variable-response specimen matrix, Kriging surrogate model (KSM) was constructed to replace FEM to reflect the function correlation between variables and responses. The accuracy of KSM was also validated. Finally, the simulated annealing optimization algorithm was implemented in KSM to seek optimal and reliable solutions. Based on the optimal results and comparison analysis, the 9096-th iteration point was the optimal solution. Although the intrusion of firewall and the mass of optimal structure increased slightly, the vehicle acceleration of the optimal solution decreased by 6.9%, which effectively reduced the risk of occupant injury.

关键词: crashworthiness, multi-objective optimization, Kriging surrogate model (KSM), simulated annealing
algorithm

Abstract: Multi-objective optimization of crashworthiness in automobile front-end structure was performed, and finite element model (FEM) was validated by experimental results to ensure that FEM can predict the response value with sufficient accuracy. Seven design variables and four crashworthiness indicators were defined. Through orthogonal design method, 18 FEMs were established, and the response values of crashworthiness indicators were extracted. By using the variable-response specimen matrix, Kriging surrogate model (KSM) was constructed to replace FEM to reflect the function correlation between variables and responses. The accuracy of KSM was also validated. Finally, the simulated annealing optimization algorithm was implemented in KSM to seek optimal and reliable solutions. Based on the optimal results and comparison analysis, the 9096-th iteration point was the optimal solution. Although the intrusion of firewall and the mass of optimal structure increased slightly, the vehicle acceleration of the optimal solution decreased by 6.9%, which effectively reduced the risk of occupant injury.

Key words: crashworthiness, multi-objective optimization, Kriging surrogate model (KSM), simulated annealing
algorithm

中图分类号:

U 462.3

SUN Xilong, WANG Dengfeng, LI Ruheng, ZHANG Bin . Multi-Objective Optimization for Structure Crashworthiness Based on Kriging Surrogate Model and Simulated Annealing Algorithm[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 727-738.

参考文献 39

[1]	EYVAZIAN A, HABIBI M K, HAMOUDA A M, et al. Axial crushing behavior and energy absorption efficiency of corrugated tubes [J]. Materials and Design,2014, 54: 1028-1038.
[2]	LI Z B, CHEN R, LU F Y. Comparative analysis of crashworthiness of empty and foam-filled thin-walled tubes [J]. Thin-Walled Structures, 2018, 124: 343-349.
[3]	GOYAL S, ANAND C S, SHARMA S K, et al. Crashworthiness analysis of foam filled star shape polygon of thin-walled structure [J]. Thin-Walled Structures, 2019, 144: 106312.
[4]	TARLOCHAN F, SAMER F, HAMOUDA A M S, et al. Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces [J]. Thin-Walled Structures,2013, 71: 7-17.
[5]	CETIN E, BAYKASOGLU C. Energy absorption of thin-walled tubes enhanced by lattice structures [J].International Journal of Mechanical Sciences, 2019,157/158: 471-484.
[6]	KILIC?ASLAN C. Numerical crushing analysis of aluminum foam-filled corrugated single- and doublecircular tubes subjected to axial impact loading [J].Thin-Walled Structures, 2015, 96: 82-94.
[7]	ZAREI H, KR¨OGER M, ALBERTSEN H. An experimental and numerical crashworthiness investigation of thermoplastic composite crash boxes [J]. Composite Structures, 2008, 85(3): 245-257.
[8]	CHEN D H, OZAKI S. Numerical study of axially crushed cylindrical tubes with corrugated surface [J].Thin-Walled Structures, 2009, 47(11): 1387-1396.
[9]	YIN H F, XIAO Y Y, WEN G L, et al. Crushing analysis and multi-objective optimization design for bionic thin-walled structure [J]. Materials and Design, 2015,87: 825-834.
[10]	PIRMOHAMMAD S, ESMAEILI-MARZDASHTI S. Multi-objective optimization of multi-cell conical structures under dynamic loads [J]. Journal of Central South University, 2019, 26: 2464-2481.
[11]	PIRMOHAMMAD S, ESMAEILI-MARZDASHTI S.Multi-objective crashworthiness optimization of square and octagonal bitubal structures including different hole shapes [J]. Thin-Walled Structures, 2019, 139:126-138.
[12]	GAO Q, WANG L M, WANG Y L, et al. Crushing analysis and multiobjective crashworthiness optimization of foam-filled ellipse tubes under oblique impact loading [J]. Thin-Walled Structures, 2016, 100: 105-112.
[13]	WANG S M, PENG Y, WANG T T, et al. Collision performance and multi-objective robust optimization of a combined multi-cell thin-walled structure for high speed train [J]. Thin-Walled Structures, 2019, 135:341-355.
[14]	HOUWB, XU X Z, HAN X, et al. Multi-objective and multi-constraint design optimization for hat-shaped composite T-joints in automobiles [J]. Thin-Walled Structures, 2019, 143: 106232.
[15]	WANG H Y, XIE H, CHENGW, et al. Multi-objective optimization on crashworthiness of front longitudinal beam (FLB) coupled with sheet metal stamping process[J]. Thin-Walled Structures, 2018, 132: 36-47.
[16]	LI F Y, SUN G Y, HUANG X D, et al. Multiobjective robust optimization for crashworthiness design of foam filled thin-walled structures with random and interval uncertainties [J]. Engineering Structures, 2015,88: 111-124.
[17]	DENG X L, LIU W Y. Crushing analysis and multiobjective crashworthiness optimization of multi-cell conical tube subjected to oblique loading [J]. Advances in Mechanical Engineering, 2019, 11(1): 1-20.
[18]	WANG C Y, LI Y, ZHAO W Z, et al. Structure design and multi-objective optimization of a novel crash box based on biomimetic structure [J]. International Journal of Mechanical Sciences, 2018, 138/139: 489-501.
[19]	KHALKHALI A, MOSTAFAPOUR M,TABATABAIE S M, et al. Multi-objective crashworthiness optimization of perforated square tubes using modified NSGAII and MOPSO [J]. Structural and Multidisciplinary Optimization, 2016, 54: 45-61.
[20]	SUN G Y, XU F X, LI G Y, et al. Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness [J]. International Journal of Impact Engineering, 2014, 64: 62-74.
[21]	YIN H F, WEN G L, HOU S J, et al. Multiobjective crashworthiness optimization of functionally lateral graded foam-filled tubes [J]. Materials and Design,2013, 44: 414-428.
[22]	ASANJARANI A, DIBAJIAN S H, MAHDIAN A. Multi-objective crashworthiness optimization of tapered thin-walled square tubes with indentations [J].Thin-Walled Structures, 2017, 116: 26-36.
[23]	YUAN L, SHI H Y, MA J Y, et al. Quasi-static impact of origami crash boxes with various profiles [J]. Thin-Walled Structures, 2019, 141: 435-446.
[24]	SARKABIRI B, JAHAN A, REZVANIMJ. Crashworthiness multi-objective optimization of the thin-walled grooved conical tubes filled with polyurethane foam[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39: 2721-2734.
[25]	ZADEH P M, SAYADI M, KOSARI A. An efficient metamodel-based multi-objective multidisciplinary design optimization framework [J]. Applied Soft Computing Journal, 2019, 74: 760-782.
[26]	BAROUTAJI B A, GILCHRIST M D, SMYTH D, et al. Crush analysis and multi-objective optimization design for circular tube under quasi-static lateral loading [J]. Thin-Walled Structures, 2015, 86: 121-131.
[27]	WU S Y, LI G Y, SUN G Y, et al. Crashworthiness analysis and optimization of sinusoidal corrugation tube [J]. Thin-Walled Structures, 2016, 105: 121-134.
[28]	BAROUTAJI A, MORRIS E, OLABI A G. Quasistatic response and multi-objective crashworthiness optimization of oblong tube under lateral loading [J].Thin-Walled Structures, 2014, 82: 262-277.
[29]	ZOU X, GAO G J, DONG H P, et al. Crushing analysis and multi-objective optimization of bitubular hexagonal columns with ribs [J]. Journal of Central South University, 2017, 24: 1164-1173.
[30]	ABBASI M, REDDY S, GHAFARI-NAZARI A, et al.Multiobjective crashworthiness optimization of multicornered thin-walled sheet metal members [J]. Thin-Walled Structures, 2015, 89: 31-41.
[31]	QIN R X, ZHOU J X, CHEN B Z. Crashworthiness design and multiobjective optimization for hexagon honeycomb structure with functionally graded thickness[J]. Advances in Materials Science and Engineering,2019, 2019: 8938696.
[32]	WU Z M. Models, methods and theories for fitting scattered data [M]. 2nd ed. Beijing: Science Press,2016 (in Chinese).
[33]	CHEN Y Y, ZHENG L. Simulation and optimization of vehicle frontal crashworthiness based on surrogate model [J]. Automotive Engineering, 2018, 40(6): 673-678 (in Chinese).
[34]	HUANG D, ALLEN T T, NOTZ W I, et al. Sequential Kriging optimization using multiple-fidelity evaluations[J]. Structural and Multidisciplinary Optimization,2006, 32: 369-382. [35] ZHUANG W M, SHI H D, XIE D X, et al. Research on the lightweight design of body-side structure based on crashworthiness requirements[J].Journal of Shanghai Jiao Tong University (Science), 2019, 24(3): 313-322.
[36]	SAKATA S, ASHIDA F, ZAKO M. An efficient algorithm for Kriging approximation and optimization with large-scale sampling data [J]. Computer Methods in Applied Mechanics and Engineering, 2004,193(3/4/5): 385-404.
[37]	SUN G Y, ZHANG H L, FANG J G, et al. A new multi-objective discrete robust optimization algorithm for engineering design [J]. Applied Mathematical Modelling,2018, 53: 602-621.
[38]	METROPOLIS N, ROSENBLUTH A W, ROSENBLUTH M N, et al. Equation of state calculations
	by fast computing machines [J]. Journal of Chemical Physics, 1953, 21: 1087-1092.
[39]	XIAO X W, XIAO D, LIN J G, et al. Overview on multi-optimization problem research [J]. Application Research of Computers, 2011, 28(3): 805-808 (in Chinese).