Journal of Shanghai Jiao Tong University (Science) ›› 2019, Vol. 24 ›› Issue (4): 445-450.doi: 10.1007/s12204-019-2094-2

• • 上一篇    下一篇

Experimental Analysis and Optimization of Timing Belt Guide Plate Material on Engine Operational Friction Loss

XU Hongchang (徐宏昌), YUAN Zhiyuan *(袁志远), PAN Haoxing (潘浩星)   

  1. (National Engineering Laboratory for Automotive Electronics Control Technology, Shanghai Jiao Tong University, Shanghai 200240, China)
  • 出版日期:2019-08-01 发布日期:2019-07-29
  • 通讯作者: YUAN Zhiyuan *(袁志远) E-mail: yuanzhiyuan_sjtu@sjtu.edu.cn

Experimental Analysis and Optimization of Timing Belt Guide Plate Material on Engine Operational Friction Loss

XU Hongchang (徐宏昌), YUAN Zhiyuan *(袁志远), PAN Haoxing (潘浩星)   

  1. (National Engineering Laboratory for Automotive Electronics Control Technology, Shanghai Jiao Tong University, Shanghai 200240, China)
  • Online:2019-08-01 Published:2019-07-29
  • Contact: YUAN Zhiyuan *(袁志远) E-mail: yuanzhiyuan_sjtu@sjtu.edu.cn

摘要: We focus on the friction loss measurement and reduction of the timing belt guide plates of a fourcylinder gasoline engine. To minimize the friction loss caused by the dynamic friction of the guide plates during timing belt motion and improve the efficiency of the internal combustion engine (ICE), we adopt four different plastic materials in fabricating the guide plates. With controlled engine boundary conditions and operational modes, an AVL electric dynamometer is used to measure the output of the engine. The results indicate that selecting polytetrafluoroethylene (PTFE) as the additive in fabricating the guide plates can effectively reduce the friction loss, so that the output torque and output power of the engine can be improved, thus reducing fuel consumptions. This work also has positive impact on the efficiency optimization of similar ICEs.

关键词: friction loss optimization, timing belt guide plate, motor driven measurement, polytetrafluoroethylene (PTFE) materials

Abstract: We focus on the friction loss measurement and reduction of the timing belt guide plates of a fourcylinder gasoline engine. To minimize the friction loss caused by the dynamic friction of the guide plates during timing belt motion and improve the efficiency of the internal combustion engine (ICE), we adopt four different plastic materials in fabricating the guide plates. With controlled engine boundary conditions and operational modes, an AVL electric dynamometer is used to measure the output of the engine. The results indicate that selecting polytetrafluoroethylene (PTFE) as the additive in fabricating the guide plates can effectively reduce the friction loss, so that the output torque and output power of the engine can be improved, thus reducing fuel consumptions. This work also has positive impact on the efficiency optimization of similar ICEs.

Key words: friction loss optimization, timing belt guide plate, motor driven measurement, polytetrafluoroethylene (PTFE) materials

中图分类号: