Multi-Objective Optimization of Torsion Springs for Solar Array Deployment

doi:10.1007/s12204-018-1969-y

Journal of Shanghai Jiao Tong University (Science) ›› 2018, Vol. 23 ›› Issue (4): 465-.doi: 10.1007/s12204-018-1969-y

• • 下一篇

Multi-Objective Optimization of Torsion Springs for Solar Array Deployment

YANG Lili (杨丽丽), WANG Deyu (王德禹)

(State Key Laboratory of Ocean Engineering; Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai Jiao Tong University, Shanghai 200240, China)

出版日期:2018-08-01 发布日期:2018-08-02
通讯作者: WANG Deyu (王德禹) E-mail:dywang@sjtu.edu.cn

Multi-Objective Optimization of Torsion Springs for Solar Array Deployment

YANG Lili (杨丽丽), WANG Deyu (王德禹)

(State Key Laboratory of Ocean Engineering; Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai Jiao Tong University, Shanghai 200240, China)

Online:2018-08-01 Published:2018-08-02
Contact: WANG Deyu (王德禹) E-mail:dywang@sjtu.edu.cn

摘要/Abstract

摘要： For solar array deployment, most existing studies mainly focus on modeling method of deployment dynamics, characteristics of hinges, and synchronization mechanisms. However, torsion springs, which work as the drive mechanisms, have hardly attracted people’s attention. In this study, the influence of the parameters of torsion springs on the deployment behavior of a solar array system with clearance joint is investigated by simulation experiments. The experimental results indicate that the deployment performances are very sensitive to the parameter values of the torsion spring. Suitable torsion springs are highly needed to improve the deployment dynamics of solar array system. Therefore, a multi-objective optimization method for the design of torsion springs is proposed. The objective of the optimization is to make the contact-impact force in revolute joint and the mass of the torsion spring minimum under the constraints of deployment time and structure strength. Finally, the effectiveness of the multi-objective optimization method is verified by an optimization example of solar array system.

关键词: solar array deployment, torsion spring, dynamic performances, contact-impact force, multi-objective optimization

Abstract: For solar array deployment, most existing studies mainly focus on modeling method of deployment dynamics, characteristics of hinges, and synchronization mechanisms. However, torsion springs, which work as the drive mechanisms, have hardly attracted people’s attention. In this study, the influence of the parameters of torsion springs on the deployment behavior of a solar array system with clearance joint is investigated by simulation experiments. The experimental results indicate that the deployment performances are very sensitive to the parameter values of the torsion spring. Suitable torsion springs are highly needed to improve the deployment dynamics of solar array system. Therefore, a multi-objective optimization method for the design of torsion springs is proposed. The objective of the optimization is to make the contact-impact force in revolute joint and the mass of the torsion spring minimum under the constraints of deployment time and structure strength. Finally, the effectiveness of the multi-objective optimization method is verified by an optimization example of solar array system.

Key words: solar array deployment, torsion spring, dynamic performances, contact-impact force, multi-objective optimization

中图分类号:

V 414.19

YANG Lili (杨丽丽), WANG Deyu (王德禹) . Multi-Objective Optimization of Torsion Springs for Solar Array Deployment[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(4): 465-.

参考文献 22

[1]	KUANG J L, MEEHAN P A, LEUNG A Y T, et al.Nonlinear dynamics of a satellite with deployable solarpanel array [J]. International Journal of Non-LinearMechanics, 2004, 39: 1161-1179.
[2]	KOTE A, BALAJI K, NATARAJU B S, et al. Effect of solar array deployment on spacecraft attitude [J].Journal of Spacecraft Technology, 2007, 17(2): 1-8.
[3]	BAI Z F, ZHAO Y. Attitude motion of spacecraft during oblique solar panel deployment [J]. Aircraft Engineering and Aerospace Technology, 2012, 84(2): 109-114.
[4]	KOJIMA Y, TANIWAKI S, OKAMI Y. Dynamic simulation of stick-slip motion of a flexible solar array [J].Control Engineering Practice, 2008, 16(6): 724-735.
[5]	DING X L, LI X, XU K, et al. Study on the behavior of solar array deployment with root hinge drive assembly[J]. Chinese Journal of Aeronautics, 2012, 25(2): 276-284.
[6]	GAO E W, ZHANG X P, YAO Z Q, Simulation and analysis of flexible solar panels’ deployment and locking processes [J]. Journal of Shanghai Jiao Tong University(Science), 2008, 13(3): 275-279.
[7]	WALLRAPP O, WIEDEMANN S. Simulation of deployment of a flexible solar array [J]. Multibody System Dynamics, 2002, 7: 101-125.
[8]	YOU B D, WANG X G, CHEN J. Vibration and impact for deployable solar array of satellite with locking hinges [J]. Journal of Mechanical Engineering, 2012,48(21): 67-76 (in Chinese).
[9]	WANG W, SUN J, YU D Y, et al. Analytical model for complex joint with latch mechanism of space structure[J]. Journal of Astronautics, 2004, 25(1): 1-4 (in Chinese).
[10]	LI H Q, LIU X F, DUAN L C, et al. Deployment and control of spacecraft solar array considering joint stickslip friction [J]. Aerospace Science Technology, 2015,42: 342-352.
[11]	ZHANG L X, BAI Z F, ZHAO Y, et al. Dynamic response of solar panel deployment on spacecraft system considering joint clearance [J]. Acta Astronautica,2012, 81(1): 174-185.
[12]	LI J L, YAN S Z, GUO F, et al. Effects of damping,friction, gravity, and flexibility on the dynamic performance of a deployable mechanism with clearance[J]. Journal of Mechanical Engineering Science, 2013,227(8): 1791-1803.
[13]	ZHEN Z, LIU C S. The analysis and simulation for three-dimensional impact with friction [J]. Multibody System Dynamics, 2007, 18: 511-530.
[14]	LI T J, GUO J, CAO Y Y. Dynamic characteristics analysis of deployable space structures considering joint clearance [J]. Acta Astronautica, 2011, 68:974-983.
[15]	FLORES P, AMBR′OSIO J, CLARO J C P, et al. Influence of the contact-impact force model on the dynamic response of multi-body systems [J]. Journal of Multi-Body Dynamics, 2006, 220(1): 21-34.
[16]	FLORES P, AMBR′OSIO J, CLARO J C P, et al. Dynamic behavior of planar rigid multibody systems including revolute joints with clearance [J]. Journal of Multi-Body Dynamics, 2007, 221(2): 161-174.
[17]	LIANG X G, DING Z S, JIAO Y H, et al. Selection method of damper parameters for solar array of satellite [J]. Journal of Harbin Institute of Technology,2011, 43(7): 71-75 (in Chinese).
[18]	GUO H W, LI C Z, SHIW H, et al. Approaches to calculate and reduce locking impact of deployable hinges[J]. Journal of Harbin Institute of Technology, 2016,48(1): 29-34 (in Chinese).
[19]	LUO W L, LYU W J. An application of multidisciplinary design optimization to the hydrodynamic performances of underwater robots [J]. Ocean Engineering,2015, 104: 686-697.
[20]	FLORES P, AMBR′OSIO J, CLARO J C P, et al. A study on dynamics of mechanical systems including joints with clearance and lubrication [J]. Mechanism and Machine Theory, 2006, 41(3): 247-261.
[21]	BAI Z F, ZHAO Y. Dynamic behavior analysis of planar mechanical systems with clearance in revolute joints using a new hybrid contact force model [J]. International Journal of Mechanical Sciences, 2012, 54(1):190-205.
[22]	JIN G, XIE X G, GU S, et al. Dynamic simulation and application of deployable mechanism of satellite solar panels [J]. Optics and Precision Engineering, 2014,22(3): 745-753 (in Chinese).

Multi-Objective Optimization of Torsion Springs for Solar Array Deployment

Multi-Objective Optimization of Torsion Springs for Solar Array Deployment

可视化

摘要/Abstract

引用本文

使用本文

参考文献 22

相关文章 0

编辑推荐

Metrics

本文评价