上海交通大学学报(英文版) ›› 2013, Vol. 18 ›› Issue (4): 394-400.doi: 10.1007/s12204-013-1413-2

• • 上一篇    下一篇

Fabrication and Drilling Tests of Chemical Vapor Deposition Diamond Coated Drills in Machining Carbon Fiber Reinforced Plastics

ZHANG Jian-guo (张建国), SHEN Bin (沈 彬), SUN Fang-hong* (孙方宏)   

  1. (School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)
  • 出版日期:2013-08-28 发布日期:2013-08-12
  • 通讯作者: SUN Fang-hong(孙方宏) E-mail:sunfanghong@sjtu.edu.cn

Fabrication and Drilling Tests of Chemical Vapor Deposition Diamond Coated Drills in Machining Carbon Fiber Reinforced Plastics

ZHANG Jian-guo (张建国), SHEN Bin (沈 彬), SUN Fang-hong* (孙方宏)   

  1. (School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)
  • Online:2013-08-28 Published:2013-08-12
  • Contact: SUN Fang-hong(孙方宏) E-mail:sunfanghong@sjtu.edu.cn

摘要: Chemical vapor deposition (CVD) diamond coated drills are fabricated by depositing diamond films on Co-cemented tungsten carbide (WC-Co) drills. The characteristics of as-deposited diamond coatings are investigated by scanning electron microscope (SEM) and Raman spectra. To evaluate the cutting performance of diamond coated drills, comparative drilling tests are conducted using diamond coated and uncoated WC-Co drills, with carbon fiber reinforced plastics (CFRPs) as the workpiece on a high-speed computer numerical control (CNC) machine. Thrust force and tool wear are measured during the drilling process. The results show that diamond coated drill exhibits better cutting performance, compared with the uncoated drill. The value of flank wear is about 70 μm after machining 90 holes, about a half of that of theWC-Co drill with 145μm after drilling only 30 holes. The wear rate of WC-Co drill is higher than that of diamond coated drill before diamond films peeling off. The diamond coated drill achieves more predictable hole quality. The improved cutting performance of the diamond coated drill is due to the high hardness, wear resistance and low coefficient of friction.

关键词: diamond coated drill, carbon fiber reinforced plastics, drilling performance, thrust force, tool wear

Abstract: Chemical vapor deposition (CVD) diamond coated drills are fabricated by depositing diamond films on Co-cemented tungsten carbide (WC-Co) drills. The characteristics of as-deposited diamond coatings are investigated by scanning electron microscope (SEM) and Raman spectra. To evaluate the cutting performance of diamond coated drills, comparative drilling tests are conducted using diamond coated and uncoated WC-Co drills, with carbon fiber reinforced plastics (CFRPs) as the workpiece on a high-speed computer numerical control (CNC) machine. Thrust force and tool wear are measured during the drilling process. The results show that diamond coated drill exhibits better cutting performance, compared with the uncoated drill. The value of flank wear is about 70 μm after machining 90 holes, about a half of that of theWC-Co drill with 145μm after drilling only 30 holes. The wear rate of WC-Co drill is higher than that of diamond coated drill before diamond films peeling off. The diamond coated drill achieves more predictable hole quality. The improved cutting performance of the diamond coated drill is due to the high hardness, wear resistance and low coefficient of friction.

Key words: diamond coated drill, carbon fiber reinforced plastics, drilling performance, thrust force, tool wear

中图分类号: