上海交通大学学报(英文版) ›› 2012, Vol. 17 ›› Issue (5): 573-578.doi: 10.1007/s12204-012-1327-4

• 论文 • 上一篇    下一篇

Modeling and Control of the Pulley Buffer System of Arresting Cable for Shipboard Aircraft Based on Magneto-Rheological Fluid

FU Li1 (傅莉), WEI Ying2*(魏颖), ZHOU Yan-kai1 (周彦凯), CHENG Tao1 (程涛)   

  1. (1. Faculty of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, China; 2. Institute of Artificial Intelligence & Robotics, Northeastern University, Shenyang 110004, China)
  • 出版日期:2012-10-30 发布日期:2012-11-16
  • 通讯作者: WEI Ying2*(魏颖) E-mail:weiying@ise.neu.edu.cn

Modeling and Control of the Pulley Buffer System of Arresting Cable for Shipboard Aircraft Based on Magneto-Rheological Fluid

FU Li1 (傅莉), WEI Ying2*(魏颖), ZHOU Yan-kai1 (周彦凯), CHENG Tao1 (程涛)   

  1. (1. Faculty of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, China; 2. Institute of Artificial Intelligence & Robotics, Northeastern University, Shenyang 110004, China)
  • Online:2012-10-30 Published:2012-11-16
  • Contact: WEI Ying2*(魏颖) E-mail:weiying@ise.neu.edu.cn

摘要: Taking the MK7-3 of USA hydraulic buffer arresting device as the research subject, the dynamical model for the shipboard aircraft arresting system is established, and the magneto-rheological (MR) damper is applied to pulley shock absorbers for shipboard aircraft block system. Due to the effect of the MR damper has not been known completely and so far MR damper model has not been defined, we use a set of characteristic test of the MR damper, through the process of parameters identification, to establish the dynamical model for the MR damper based on the Bingham plastic model. Then, the fuzzy control rules are designed, the buffer control for the pulley buffer of shipboard aircrafts is completed in touchdown moment based on MR technology. Compared with blocking device of hydraulic pulley buffer in the same condition, the simulations results show that the proposed MR pulley buffer can effectively recognize the impact energy for shipboard block system and reduce the pull peak of arresting cable. It improves significantly safety during landing of the air vehicles and lowers the risk of accidents.

关键词: magneto-rheological fluid (MRF), shipboard aircraft, pulley buffer, parameter identification, fuzzy control

Abstract: Taking the MK7-3 of USA hydraulic buffer arresting device as the research subject, the dynamical model for the shipboard aircraft arresting system is established, and the magneto-rheological (MR) damper is applied to pulley shock absorbers for shipboard aircraft block system. Due to the effect of the MR damper has not been known completely and so far MR damper model has not been defined, we use a set of characteristic test of the MR damper, through the process of parameters identification, to establish the dynamical model for the MR damper based on the Bingham plastic model. Then, the fuzzy control rules are designed, the buffer control for the pulley buffer of shipboard aircrafts is completed in touchdown moment based on MR technology. Compared with blocking device of hydraulic pulley buffer in the same condition, the simulations results show that the proposed MR pulley buffer can effectively recognize the impact energy for shipboard block system and reduce the pull peak of arresting cable. It improves significantly safety during landing of the air vehicles and lowers the risk of accidents.

Key words: magneto-rheological fluid (MRF), shipboard aircraft, pulley buffer, parameter identification, fuzzy control

中图分类号: