Journal of Shanghai Jiao Tong University

Journal of Shanghai Jiaotong University >

2024 , Vol. 58 >Issue 8: 1282 - 1289

DOI: https://doi.org/10.16183/j.cnki.jsjtu.2022.532

Mechanical Engineering

Construction of Combined Variable-Section Scroll Tooth Profiles Using Algebraic-Archimedes Double Spiral

Expand
  • School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China

Received date: 2022-12-26

  Revised date: 2023-02-09

  Accepted date: 2023-02-15

  Online published: 2023-02-27

Fold

Abstract

The mathematical model of the profile is complicated and the connection conditions are not easily obtained by explicit calculation because different model parameters are used for different types of curves. To address the above problems, a new scroll profile is proposed by double spiral which is the combination of algebraic spiral and Archimedes spiral. First, based on the conjugate mesh theory, the relationship between the spindle angle and the pole angle of the curve is solved to derive the normalized mathematical model of the scroll line of the spiral type. Then, based on the smooth connection conditions of the combined profiles, the constraint equations of the connection points of the double spiral scroll profiles are established, and the geometric models of the two types of double spiral scroll profiles are obtained. Afterwards, the effects of the parameters of the first type of double spiral combined profile (spiral index, spiral coefficient, and pole angle of the connection point) on the geometric performance of the scroll teeth are quantitatively analyzed. Finally, the performance advantages of the two-screw combination scroll profile are comparatively studied. The results show that the geometry of the first type of double spiral combined profile is simple and can be directly used in production without head profile correction. The stroke volume is increased by 7.61%, the compression ratio is increased by 27.42%, and the area utilization factor is increased by 7.61% compared with the conventional circular involute scroll teeth at the same radial dimension of scroll teeth.

Key words： Archimedes spiral; algebraic spiral; spiral type scroll profile; double spiral combination profile; variable section scroll wraps; scroll compressor

Cite this article

YAN Min, LIU Tao, MA Dequan, DANG Xu . Construction of Combined Variable-Section Scroll Tooth Profiles Using Algebraic-Archimedes Double Spiral[J]. Journal of Shanghai Jiaotong University, 2024 , 58(8) : 1282 -1289 . DOI: 10.16183/j.cnki.jsjtu.2022.532

References

[1] GUO Y, WANG Y, ZHAO S. Experimental investigation and optimization of the semisolid multicavity squeeze casting process for wrought aluminum alloy scroll[J]. Materials, 2020, 13(22): 1-15.
[2] 王君, 崔淑洁, 冯浩志, 等. 涡旋压缩机不对称双涡旋齿型线的构建与模拟[J]. 工程热物理学报, 2021, 42(2): 386-392.
  WANG Jun, CUI Shujie, FENG Haozhi, et al. Construction and simulation of an asymmetric twin-wrap profile for scroll compressors[J]. Journal of Engineering Thermophysics, 2021, 42(2): 386-392.
[3] 侯才生, 刘涛. 基于Frenet标架的变截面涡旋型线构建与性能研究[J]. 上海交通大学学报, 2019, 53(12): 1495-1501.
  HOU Caisheng, LIU Tao. Construction and performance investigation of variable cross-section scroll profiles based on Frenet frame[J]. Journal of Shanghai Jiao Tong University, 2019, 53(12): 1495-1501.
[4] 张朋成, 彭斌, 马捷. 变截面涡旋膨胀机几何模型分析[J]. 上海交通大学学报, 2023, 57(3): 309-315.
  ZHANG Pengcheng, PENG Bin, MA Jie. Comprehensive analysis of geometric model of variable thickness scroll expander[J]. Journal of Shanghai Jiao Tong University, 2023, 57(3): 309-315.
[5] 侯才生, 刘涛. 基于Frenet标架的变截面涡旋齿齿厚变化规律研究[J]. 哈尔滨工程大学学报, 2019, 40(6): 1169-1174.
  HOU Caisheng, LIU Tao. Law governing the change in the thickness of a variable cross-section scroll tooth based on Frenet frame[J]. Journal of Harbin Engineering University, 2019, 40(6): 1169-1174.
[6] 王立存, 董光辉, 王旭东, 等. 通用型线电动涡旋压缩机的结构设计及动态仿真[J]. 中国机械工程, 2017, 28(6): 728-733.
  WANG Licun, DONG Guanghui, WANG Xudong, et al. Structural design and dynamic simulation of a general profile electric scroll compressor[J]. China Mechanical Engineering, 2017, 28(6): 728-733.
[7] EMHARDT S, TIAN G, CHEW J. A review of scroll expander geometries and their performance[J]. Applied Thermal Engineering, 2018, 141: 1020-1034.
[8] BUSH J W, BEAGLE W P, HOUSMAN M E. Maximizing scroll compressor displacement using generalized profile geometry[C]// Proceedings of International Compressor Engineering Conference Purdue. Indiana, USA: Rau W. Herrick Laboratories Press, 1994: 205-210.
[9] SHAFFER B R, GROLL E A. Variable wall thickness scroll geometry modeling with use of a control volume approach[J]. International Journal of Refrigeration, 2013, 36(7): 1809-1820.
[10] 彭斌, 孙迎. 变截面涡旋压缩机数学模型及试验研究[J]. 机械工程学报, 2015, 51(14): 185-191.
  PENG Bin, SUN Ying, Investigation of mathematical modeling and experiment for variable thickness scroll compressor[J]. Journal of Mechanical Engineering, 2015, 51(14): 185-191.
[11] 王君, 刘强, 曹晨燕, 等. 涡旋压缩机全啮合渐变壁厚涡旋齿的设计与分析[J]. 工程热物理学报, 2018, 39(8): 1713-1717.
  WANG Jun, LIU Qiang, CAO Chenyan, et al. Design and analysis of completely meshing profile of tapered thickness wrap for scroll compressors[J]. Journal of Engineering Thermophysics, 2018, 39(8): 1713-1717.
[12] KOHSOKABE H, TAKEBAYASHI M, KUNUGI Y, et al. Study on scroll profile based on algebraic spiral for scroll fluid machines[J]. Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, 2011, 11(3): 337-347.
[13] 张朋成, 彭斌, 马捷. 一种由代数螺线构成的变截面涡旋机械[J]. 华中科技大学学报(自然科学版), 2021, 49(5): 56-61.
  ZHANG Pengcheng, PENG Bin, MA Jie. A variable thickness scroll machines composed of algebraic spiral[J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2021, 49(5): 56-61.
[14] WANG W, ZHAO Y, LI Y. Design and dynamic modeling of variable stiffness joint actuator based on archimedes spiral[J]. IEEE Access, 2018, 6: 43798-43807.
[15] QIU H, KUBO A, YUE L Y, et al. Optimal Archimedes’ spiral interpolation for cutter path generation in NC machining of noncircular contours[J]. The International Journal of Advanced Manufacturing Technology, 2008, 36(1/2): 69-82.
[16] 王立存, 陈进, 王旭东, 等. 基于包络原理的涡旋式滤油机真空泵通用涡旋型线等距曲线研究[J]. 中国机械工程, 2011, 22(4): 412-415.
  WANG Licun, CHEN Jin, WANG Xudong, et al. Research on equidistant curves of general scroll profiles for scroll vacuum pump based on envelope principle[J]. China Mechanical Engineering, 2011, 22(4): 412-415.
[17] 陈兵奎, 梁栋, 高艳娥. 齿轮传动共轭曲线原理[J]. 机械工程学报, 2014, 50(1): 130-136.
  CHEN Bingkui, LIANG Dong, GAO Yan’e. The principle of conjugate curves for gear transmission[J]. Journal of Mechanical Engineering, 2014, 50(1): 130-136.
Options
Outlines

/

〈 〉