Journal of Shanghai Jiao Tong University

Journal of Shanghai Jiaotong University >

2023 , Vol. 57 >Issue 2: 213 - 220

DOI: https://doi.org/10.16183/j.cnki.jsjtu.2021.365

Materials Science and Engineering

Material Model of Membrane Structure in Rainstorm

Expand
  • School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Received date: 2021-09-23

  Revised date: 2021-12-14

  Accepted date: 2022-02-07

  Online published: 2022-11-25

Fold

Abstract

When encountering heavy rain, the membrane surface with a relatively small slope is easy to accumulate water. Accurately simulating the deformation of the membrane surface at this time will help ensure the safety of the structure. The linear constitutive model of membrane material used in existing research is not suitable for simulating the deformation of membrane structure in rainstorm. This study conducts a uniform load test on a membrane structure to simulate the mechanical behavior of the membrane surface in rainstorm and obtains the deformation form of the structure when water is accumulated. The linear constitutive model and the double broken line constitutive model of membrane material are used in the finite element model of the membrane structure for load analysis. By comparing the deformation of the finite element model and the actual structure, it selects the constitutive model suitable for simulating the deformation of the membrane structure in heavy rain. The numerical simulation results show that the structural deformation simulated by the double broken line constitutive model is closer to the deformation measured in the experiment than the linear constitutive model. The research results can provide a reference for the selection of the membrane constitutive model and the analysis of membrane structure in rainstorm.

Key words： membrane structure; water accumulation; membrane material model; numerical simulation; deformation prediction

Cite this article

PANG Yan, QING Qiang, WANG Shasha, ZHANG Xiangyu, GONG Jinghai . Material Model of Membrane Structure in Rainstorm[J]. Journal of Shanghai Jiaotong University, 2023 , 57(2) : 213 -220 . DOI: 10.16183/j.cnki.jsjtu.2021.365

References

[1] 中国工程建设标准化协会. 膜结构技术规程: CECS 158—2015[S]. 北京: 中国计划出版社, 2016.
[1] China Association for Engineering Construction Standardization. Technical specification for membrane structures: CECS 158—2015[S]. Beijing: China Planning Press, 2016.
[2] 于沁灵, 龚景海, 郭晓, 等. 涂层织物类膜材的拉伸试验及力学参数研究[J]. 空间结构, 2020, 26(4): 64-69.
[2] YU Qinling, GONG Jinghai, GUO Xiao, et al. Tensile test and mechanical parameters of coated fabric membrane[J]. Spatial Structures, 2020, 26(4): 64-69.
[3] SHI T B, HU J H, CHEN W J, et al. Biaxial tensile behavior and strength of architectural fabric membranes[J]. Polymer Testing, 2020, 82: 106230.
[4] GAO C J, CHEN W J, SHI T B, et al. Response surface characterization for biaxial tensile properties of envelope fabrics under multiple stress ratios[J]. Composite Structures, 2019, 230: 111482.
[5] GAO C J, CHEN W J, HU J H, et al. A new constitutive model on biaxial tensile behavior of architectural fabrics[J]. Polymer Testing, 2020, 87: 106519.
[6] 卫东, 王臣, 向阳, 等. 建筑膜材的材性试验研究[J]. 空间结构, 2002, 8(1): 37-43.
[6] WEI Dong, WANG Chen, XIANG Yang, et al. Experimental study on material properites of structural fabric[J]. Spatial Structures, 2002, 8(1): 37-43.
[7] 孙战金, 张其林, 杨宗林. 采用数值计算进行膜材预张力测量方法初探[J]. 振动、测试与诊断, 2005, 25(1): 31-35.
[7] SUN Zhanjin, ZHANG Qilin, YANG Zonglin. Preliminary study on membrane pretension measurement by numerical calculations[J]. Journal of Vibration, Measurement & Diagnosis, 2005, 25(1): 31-35.
[8] 张其林, 倪佳女. 涂层织物类膜材弹性模量试验研究及有限元分析[C]// 第十二届空间结构学术会议论文集. 北京: 中国土木工程学会桥梁及结构工程分会空间结构委员会, 2008: 275-279.
[8] ZHANG Qilin, NI Jianü. Experimental research and finite element analysis of elastic modulus of coated fabrics[C]// The 12th Space Structure Academic Conference. Beijing, China: Spatial structure committee of bridge and structural engineering branch of china civil engineering society, 2008: 275-279.
[9] 黄赛帅, 陈务军, 董石麟. 飞艇囊体膜材弹性常数双向拉伸测试与分析方法[J]. 空间结构, 2011, 17(2): 84-89.
[9] HUANG Saishuai, CHEN Wujun, DONG Shilin. Bi-axial tensile test method and analytical algorithm of elastic constants for the airship envelope fabric[J]. Spatial Structures, 2011, 17(2): 84-89.
[10] YANG B, YU Z L, ZHANG Q L, et al. The nonlinear orthotropic material model describing biaxial tensile behavior of PVC coated fabrics[J]. Composite Structures, 2020, 236: 111850.
[11] 张丽, 陈务军, 董石麟. PVDF/PES建筑织物膜力学性能单双轴拉伸试验[J]. 空间结构, 2012, 18(3): 41-48.
[11] ZHANG Li, CHEN Wujun, DONG Shilin. Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test[J]. Spatial Structures, 2012, 18(3): 41-48.
[12] XU J H, ZHANG Y Y, WU M, et al. A phenomenological material model for PTFE coated fabrics[J]. Construction and Building Materials, 2020, 237: 117667.
[13] WAKEFIELD D S. Engineering analysis of tension structures: Theory and practice[J]. Engineering Structures, 1999, 21(8): 680-690.
[14] DINH T D, REZAEI A, PUYSTIENS S, et al. A study of tension fabric membrane structures under in-plane loading: Nonlinear finite element analysis and validation[J]. Composite Structures, 2015, 128: 10-20.
[15] COELHO M, ROEHL D. A finite-strain elastoplasticity material model for ETFE membrane structures[J]. Computers & Structures, 2019, 217: 36-44.
Options
Outlines

/

〈 〉