Prediction of Ultimate Bearing Capacity of Long-Term Loaded Piles

Expand
  • Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China

Received date: 2019-12-03

  Online published: 2021-04-30

Abstract

To predict the ultimate bearing capacity of long-term loaded piles, the shortcomings of current empirical formulas of pile bearing capacity considering time effect are discussed. Based on the current research of the bearing capacity of static bearing piles in natural saturated clay, factors for the bearing capacity of long-term loaded old piles are analyzed. Then, based on analysis of the data from pile foundation bearing tests, the formula for calculating the ultimate bearing capacity of jacked piles considering the time effect and the current pile foundation technical code is proposed, in which the pile side resistance aging coefficient of pile side resistance is proposed, and some factors for the aging coefficient are discussed. Based on the experimental data, a method for calculating the parameters in the formula by using soil properties is proposed. The accuracy of the proposed method is verified by a field test. The results show that this pile side resistance aging coefficient can predict the bearing capacity of single pile under current code, increase the design value of the bearing capacity of old piles while ensuring safety. By using the undrained shear strength and plasticity index, the pile side resistance aging coefficient can be predicted.

Cite this article

LI Jingpei, XU Zihan . Prediction of Ultimate Bearing Capacity of Long-Term Loaded Piles[J]. Journal of Shanghai Jiaotong University, 2021 , 55(4) : 380 -386 . DOI: 10.16183/j.cnki.jsjtu.2019.348

References

[1] 李镜培, 张凌翔, 李林, 等. 天然饱和黏土中新、旧桩荷载-沉降关系研究[J]. 岩石力学与工程学报, 2016, 35(9):1906-1913.
[1] LI Jingpei, ZHANG Lingxiang, LI Lin, et al. Ana-lysis of load-settlement relationship of new and old piles in natural saturated clays[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(9):1906-1913.
[2] NG K W, SRITHARAN S. A procedure for incorporating setup into load and resistance factor design of driven piles[J]. Acta Geotechnica, 2016, 11(2):347-358.
[3] KRISTINOF R, THORN M. Setup of driven pile capacity with time in soft marine sediments[J]. Australian Geomechanics Journal, 2017, 52(3):1-9.
[4] DOHERTY P, GAVIN K. Pile aging in cohesive soils[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2013, 139(9):1620-1624.
[5] CHEN Q M, HAQUE M N, ABU-FARSAKH M Y, et al. Field investigation of pile setup in mixed soil[J]. Geotechnical Testing Journal, 2014, 37(2):268-281.
[6] HAQUE M N, ABU-FARSAKH M Y, ZHANG Z J. Evaluation of pile capacity from CPT and pile setup phenomenon[J]. International Journal of Geotechnical Engineering, 2020, 14(2):196-205.
[7] KSAIBATI R, NG K. Medium-scale experimental study of pile setup[J]. Geotechnical Testing Journal, 2017, 40(2):269-283.
[8] GAVIN K, JARDINE R, KARLSRUD K, et al. The effects of pile ageing on the shaft capacity of offshore piles in sand[C]//Proceedings of Int. Symp. on Frontiers in Offshore Geotechnics III (ISFOG). CRC Press/Balkema: Boca Raton, 2015: 129-151.
[9] WANG J X, VERMA N, STEWARD E J. Estimating pile set-up using 24-h restrike resistance and computed static capacity for PPC piles driven in soft lousiana coastal deposits[J]. Geotechnical and Geolo-gical Engineering, 2016, 34(1):267-283.
[10] HAQUE M N, CHEN Q, ABU-FARSAKH M, et al. Effects of pile size on set-up behavior of cohesive soils[C]//Geo-Congress 2014: Geo-characterization and Modeling for Sustainability. ASCE, 2014: 1743-1749.
[11] 李林, 李镜培, 孙德安, 等. 考虑时效性的静压桩荷载-沉降关系预测方法[J]. 岩土工程学报, 2017, 39(12):2327-2334.
[11] LI Lin, LI Jingpei, SUN De’an, et al. Prediction method for time-dependent load-settlement relationship of a jacked pile[J]. Chinese Journal of Geotechnical Engineering, 2017, 39(12):2327-2334.
[12] SKOV R, DENVER H. Time-dependence of bearing capacity of piles[C]//Proceedings of Third International Conference on the Application of Stress-Wave Theory to Piles. Ottawa. IOS Press: Amsterdam, 1988: 25-27.
[13] PEI J, WANG Y. Practical experiences on pile dynamic measurement in Shanghai[C]//Proceedings of International Conference on Deep Foundations. CRC Press/Balkema: Boca Raton, 1986: 36-41.
[14] BOGARD J D, MATLOCK H. Application of model pile tests to axial pile design[C]//Offshore Technology Conference. ASCE, 1990: 13-20.
[15] LI L, LI J P, SUN D A, et al. Analysis of time-dependent bearing capacity of a driven pile in clayey soils by total stress method[J]. International Journal of Geomechanics, 2017, 17(7):04016156.
[16] 中华人民共和国住房和城乡建设部. 建筑桩基技术规范 JGJ 94-2008[S]. 北京: 中国建筑工业出版社, 2008.
[16] Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Technical code for building pile foundations: JGJ 94-2008[S]. Beijing: China Architecture and Building Press, 2008.
[17] BULLOCK P J. Pile friction freeze: A field and laboratory study[D]. Gainesville, Florida: University of Florida, 1999.
[18] 中华人民共和国住房和城乡建设部. 建筑桩基检测技术规范:JGJ 106-2014[S]. 北京:中国建筑工业出版社, 2014.
[18] Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Technical code for testing of building foundation piles: JGJ 106-2014[S]. Beijing: China Architecture and Building Press, 2014.
[19] ABU-FARSAKH M Y, HAQUE M N, TSAI C. A full-scale field study for performance evaluation of axially loaded large-diameter cylinder piles with pipe piles and PSC piles[J]. Acta Geotechnica, 2017, 12(4):753-772.
[20] ABU-FARSAKH M Y, ROSTI F, SOURI A. Evaluating pile installation and subsequent thixotropic and consolidation effects on setup by numerical simulation for full-scale pile load tests[J]. Canadian Geotechnical Journal, 2015, 52(11):1734-1746.
[21] ABU-FARSAKH M Y, HAQUE M N, CHEN Q. Field instrumentation and testing to study set-up phenomenon of piles driven into Louisiana clayey soils[R]. Louisiana Transportation Research Center, 2016.
[22] HAQUE M N, ABU-FARSAKH M Y, TSAI C, et al. Load-testing program to evaluate pile-setup behavior for individual soil layers and correlation of setup with soil properties[J]. Journal of Geotechnical and Geoenvironmental Engineering, 2017, 143(4):04016109.
Outlines

/