The automobile body is made of sheet metal stamping parts which are welded and assembled hierarchically. The sheet metal of the automobile body has a great flexibility. The deformation caused by external load will directly affect the transmission and accumulation of assembly deviation and finally affect the assembly accuracy and function. This paper focuses on the problem of inconsistency in the window lifting process, and a 3D assembly tolerance analysis model including finite element deformation is established to reveal the influence of sealing resistance and the rigidity of the inner panel of the door on the assembly state of the lifter. Based on the benefit ratio of tolerance optimization as the evaluation indicator to determine the optimization plan, an optimized tolerance design and an improved lifting consistency are realized. The results show that when the surface profile of the matching surface of guide rail and bracket is tightened to 0.5mm and the position of the mounting hole of glass and bracket is tightened to 0.9mm, the assembly tolerance of the door model conforms to the set goal and meets the requirements of lifting smoothness.
QIAN Peng, WANG Guoliang, ZHU Wenfeng
. Modeling and Optimization of 3D Assembly Tolerance for
Window Lifting Under Flexible Deformation[J]. Journal of Shanghai Jiaotong University, 2020
, 54(11)
: 1134
-1141
.
DOI: 10.16183/j.cnki.jsjtu.2019.048
［1］ZHAO Y M, LIU D S, WEN Z J. Optimal tolerance design of product based on service quality loss［J］. The International Journal of Advanced Manufacturing Technology, 2016, 82(9/10/11/12): 1715-1724.
［2］李明, 李娜, 费朋伟, 等. 综合受力变形的薄壁零件公差设计与分析［J］. 机电一体化, 2013, 19(11): 43-47.
LI Ming, LI Na, FEI Pengwei, et al. The tolerance design and analysis of comprehensive mechanical deformative thin-wall parts［J］. Mechatronics, 2013, 19(11): 43-47.
［3］穆晓凯, 孙清超, 孙克鹏, 等. 基于载荷作用的柔性体三维公差建模及精度影响分析［J］. 机械工程学报, 2018, 54(11): 39-48.
MU Xiaokai, SUN Qingchao, SUN Kepeng, et al. Three-dimensional tolerance modeling and precision analysis of flexible body based on the assembly load［J］. Journal of Mechanical Engineering, 2018, 54(11): 39-48.
［4］HASHEMIAN A, IMANI B M. An improved sensitivity-free probability analysis in variation assessment of sheet metal assemblies［J］. Journal of Engineering Design, 2014, 25(10/11/12): 346-366.
［5］JAYAPRAKASH G, THILAK M, SIVAKUMAR K. Optimal tolerance design for mechanical assembly considering thermal impact［J］. The International Journal of Advanced Manufacturing Technology, 2014, 73(5/6/7/8): 859-873.
［6］詹高伟, 李明, 韦庆玥. 综合受力变形的车门公差设计与分析［J］. 机械制造, 2015, 53(9): 32-35.
ZHAN Gaowei, LI Ming, WEI Qingyue. Design and analysis of door tolerance of comprehensive forced deformation［J］. Machinery, 2015, 53(9): 32-35.
［7］朱文峰, 林佩剑, 周辉, 等. 基于非线性刚度拟合的车窗系统约束分析与建模［J］. 机械工程学报, 2015, 51(20): 171-176.
ZHU Wenfeng, LIN Peijian, ZHOU Hui, et al. Constraint analysis and modeling of automotive window based on nonlinear stiffness fitting［J］. Journal of Mechanical Engineering, 2015, 51(20): 171-176.
［8］朱文峰, 周辉, 黎鹏. 基于非线性弹簧的双曲率车窗密封系统动力学建模［J］. 上海交通大学学报, 2016, 50(6): 868-872.
ZHU Wenfeng, ZHOU Hui, LI Peng. Dynamic model of double curvature automotive window sealing system based on equivalent nonlinear constraint［J］. Journal of Shanghai Jiao Tong University, 2016, 50(6): 868-872.
［9］汤莹.车门系统零部件设计及系统集成［M］. 北京: 机械工业出版社, 2017.
TANG Ying. Door system component design and system integration［M］. Beijing: China Machine Press, 2017.
