During the design process of ice-class propellers, it is necessary to check the blade edge strength to avoid the gap on the blade under ice contact, which may affect the propeller performance of hydrodynamic force, cavitation, noise, etc. To quickly check the blade edge strength, based on the rules in IACS URI3 and the finite element method (FEM), the strength check method of blade edges is established under the concentrated ice load conditions. Considering the particularity of the propeller, an automatic meshing method has been developed by dividing the propeller into many 8-node hexahedron elements along radial, chordwise and thickness directions, which can help to mesh the propeller blades reasonably according to the loading position. The FEM is applied to calculate the stress and deformation distributions of the propeller blade under the concentrated ice load. Taking the PC3 ice-class propeller as an example, the blade edge strength is analyzed and checked. The results show that large stress is concentrated on the blade edge which is prone to cause the damage.
YE Liyu, WANG Chao, GUO Chunyu, CHANG Xin
. Strength Check Method of Blade Edge Under
Concentrated Ice Load Condition[J]. Journal of Shanghai Jiaotong University, 2020
, 54(1)
: 10
-19
.
DOI: 10.16183/j.cnki.jsjtu.2020.01.002
［1］BROUWER J, HAGESTEIJN G, BOSMAN R. Propeller-ice impacts measurements with a six-component blade load sensor［C］//Third International Symposium on Marine Propulsors. Launceston, Tasmania, Australia: VTT, 2013: 47-54.
［2］DNV. Ice strengthening of propulsion machinery: No. 51.1 ［S］. Hvik, Norway: DNV, 2010.
［3］华汉金. 冰区加强型新叶型剖面螺旋桨开发研究［J］. 船舶, 1996(1): 17-20.
HUA Hanjin. Development and study for propeller with new profile and ice strengthening［J］. Ship & Boat, 1996(1): 17-20.
［4］NORHAMO L, BAKKEN G M, DEINBOLL O, et al. Challenges related to propulsor: Ice interaction in arctic waters ［C］//First International Symposium on Marine Propulsors. Trondheim, Norway: VTT, 2009: 1-9.
［5］LEE S K. Ice controllable pitch propeller: Strength check based on IACS polar class rule［C］//IceTech Conference. Banff, Alberta, Canada: ABS, 2008: 119-127.
［6］LEE S K. Engineering practice on ice propeller strength assessment based on IACS polar ice rule: UR13［C］//10th International Symposium on Practical Design of Ships and Other Floating Structures. Houston, TX, USA: ABS, 2007: 219-228.
［7］孙自力. 船舶用螺旋桨原理及修理［M］. 哈尔滨: 哈尔滨工程大学出版社, 2010.
SUN Zili. Principle and repair for ship propeller［M］. Harbin, Harbin Engineering University Press, 2010.
［8］叶礼裕, 王超, 李鹏, 等. BEM/FEM耦合螺旋桨静强度计算方法［J］. 中国舰船研究, 2017, 12(5): 64-74.
YE Liyu, WANG Chao, LI Peng, et al. Calculation of marine propeller static strength based on coupled BEM/FEM［J］. Chinese Journal of Ship Research, 2017, 12(5): 64-74.
［9］赵均海, 汪梦甫. 弹性力学及有限元［M］. 武汉: 武汉理工大学出版社, 2003.
ZHAO Junhai, WANG Mengfu. Elasticity and finite element［M］. Wuhan: Wuhan University of Technology Press, 2003.
［10］WALKER D L N. The influence of blockage and cavitation on the hydrodynamic performance of ice class propellers in blocked flow［D］. St. John’s, Newfoundland, Canada: Memorial University of Newfoundland, 1996.
［11］YE L Y, WANG C, CHANG X, et al. Propeller-ice contact modeling with peridynamics［J］. Ocean Engineering, 2017, 139: 54-64.
［12］王锡栋. 极地船舶与推进装置的冰载荷数值预报分析［D］. 哈尔滨: 哈尔滨工程大学, 2017.
WANG Xidong. Numerical analysis of ice load on polar ship and propulsion device［D］. Harbin: Harbin Engineering University, 2017.
［13］常欣, 李鹏, 王超, 等. 冰载荷和纵倾角对螺旋桨强度的影响［J］. 中国舰船研究, 2018, 13(4): 7-15.
CHANG Xin, LI Peng, WANG Chao, et al. Effect of ice-load and trim angle on the strength of propeller［J］. Chinese Journal of Ship Research, 2018, 13(4): 7-15.
［14］肖翀, 覃文洁, 左正兴. 曲轴应力场有限元计算单元类型和尺寸对计算精度和规模的影响［J］. 柴油机, 2004, 26(Sup.): 176-178.
XIAO Chong, QIN Wenjie, ZUO Zhengxing. Influence of element-form and element-size on FE calculation of crankshaft stress field［J］. Diesel Engine, 2004, 26(Sup.): 176-178.
