The multi-pass conventional spinning includes the shaping stage and preforming stage. This paper focuses on the flange wrinkling prediction in the preforming stage. According to the deformation characteristics in the preforming stage, the assumptions that the inner side of the instability region at the flange is a simple support condition and the outside is a free boundary condition are proposed, and the deflection surface equation for describing the wrinkling wave shape that meets the boundary conditions is established. The prediction model of the flange wrinkling is developed based on the energy method. Combining the geometries and the stress fields in the conventional spinning numerical simulation, the flange wrinkling prediction in the preforming stage is realized. Compared with the spinning experiment in an aluminum alloy hemispherical component, the developed model can accurately predict the flange wrinkling in the preforming stage.
LI Xuelong,YU Zhongqi,ZHAO Yixi,EVSYUKOV S A
. Study on Flange Wrinkling Prediction in Preforming Stage During
Multi-Pass Conventional Spinning[J]. Journal of Shanghai Jiaotong University, 2019
, 53(11)
: 1375
-1380
.
DOI: 10.16183/j.cnki.jsjtu.2019.11.014
［1］杨合, 詹梅, 李甜, 等. 铝合金大型复杂薄壁壳体旋压研究进展［J］. 中国有色金属学报, 2011, 21(10): 2534-2550.
YANG He, ZHAN Mei, LI Tian, et al. Advances in spinning of aluminum alloy large-sized complicated thin-walled shells［J］. The Chinese Journal of Nonferrous Metals, 2011, 21(10): 2534-2550.
［2］LIU J H, YANG H, LI Y Q. A study of the stress and strain distributions of first-pass conventional spinning under different roller-traces［J］. Journal of Materials Processing Technology, 2002, 129(1/2/3): 326-329.
［3］WANG X, CAO J. On the prediction of side-wall wrinkling in sheet metal forming processes［J］. International Journal of Mechanical Sciences, 2000, 42(12): 2369-2394.
［4］YANG H, LIN Y. Wrinkling analysis for forming limit of tube bending processes［J］. Journal of Materials Processing Technology, 2004, 152(3): 363-369.
［5］SHAFAAT M A, ABBASI M, KETABCHI M. Investigation into wall wrinkling in deep drawing process of conical cups［J］. Journal of Materials Processing Technology, 2011, 211(11): 1783-1795.
［6］CHEN Y Z, LIU W, ZHANG Z C, et al. Analysis of wrinkling during sheet hydroforming of curved surface shell considering reverse bulging effect［J］. International Journal of Mechanical Sciences, 2017, 120: 70-80.
［7］XIA Q X, SHIMA S, KOTERA H, et al. A study of the one-path deep drawing spinning of cups［J］. Journal of Materials Processing Technology, 2005, 159(3): 397-400.
［8］ZHANG Y Q, SHAN D B, XU W C, et al. Study on spinning process of a thin-walled aluminum alloy vessel head with small ratio of thickness to diameter［J］. Journal of Manufacturing Science and Engineering, 2010, 132(1): 014504.
［9］宋晓飞, 詹梅, 蒋华兵, 等. 铝合金大型复杂薄壁壳体多道次旋压缺陷形成机理［J］. 塑性工程学报, 2013, 20(1): 31-36.
SONG Xiaofei, ZHAN Mei, JIANG Huabing, et al. Forming mechanism of defects in spinning of large complicated thin-wall aluminum alloy shells［J］. Journal of Plasticity Engineering, 2013, 20(1): 31-36.
［10］史敏, 赵亦希, 孔庆帅, 等. 薄壁铝合金封头挡板辅助旋压成形方法［J］. 上海交通大学学报, 2015, 49(10): 1497-1503.
SHI Min, ZHAO Yixi, KONG Qingshuai, et al. Baffle-assistant spinning method for thin-walled aluminum alloy seal head［J］. Journal of Shanghai Jiao Tong University, 2015, 49(10): 1497-1503.
［11］KONG Q S, YU Z Q, ZHAO Y X, et al. Theoretical prediction of flange wrinkling in first-pass conventional spinning of hemispherical part［J］. Journal of Materials Processing Technology, 2017, 246: 56-68.
［12］TIMOSHENKO S P, WOINOWSKY-KRIEGER S. Theory of plates and shells ［M］. 2nd ed. New York: McGraw-Hill, 1959.
［13］GAN T, YU Z Q, ZHAO Y X, et al. Effects of backward path parameters on formability in conventional spinning of aluminum hemispherical parts ［J］. Transactions of Nonferrous Metals Society of China, 2018, 28(2): 328-339.
