In order to study the influence of blanking process on the magnetic properties of non-oriented electrical steel lamination, different shapes of punch and different blanking clearances are adopted. The relationship between the magnetic property deterioration and residual stress distribution of non-oriented electrical steel is studied. The results show that the blanking performance of the flat punch is the best, and the concave punch is better than the beveled one. In the considered blanking clearance range (5%～20% of sheet thickness), the magnetic property deterioration of the non-oriented electrical steel lamination decreases at first and then increases with the increasing blanking clearance. There exists an optimal clearance for reducing the magnetic properties deterioration. The magnetic property deterioration of non-oriented electrical steel lamination is mainly related to the peak residual stress. The larger the peak residual stress is, the worse the magnetic properties are. The study can provide parameter optimization guidance for blanking process of non-oriented electrical steel in industry.
WANG Xinke，WANG Zhe，CUI Ronggao，LI Shuhui
. Influence of Blanking Process on the Magnetic Properties of
Non-Oriented Electrical Steel Lamination[J]. Journal of Shanghai Jiaotong University, 2019
, 53(9)
: 1115
-1121
.
DOI: 10.16183/j.cnki.jsjtu.2019.09.014
［1］何忠治. 电工钢［M］. 北京: 冶金工业出版社, 1997.
HE Zhongzhi. The electrical steel［M］. Beijing: The Metallurgical Industry Press, 1997.
［2］ODA Y, KOHNO M, HONDA A. Recent development of non-oriented electrical steel sheet for automobile electrical devices［J］. Journal of Magnetism and Magnetic Materials, 2008, 320: 2430-2435.
［3］NAKAZAKI O, KAI Y, TODAKA T, et al. Iron loss properties of a practical rotating machine stator core at each manufacturing stage［J］. Journal of Magnetism and Magnetic Materials, 2010, 33: 79-86.
［4］韩志磊, 胡树兵, 熊雪松, 等. 冲剪加工对无取向硅钢边缘组织和磁性能的影响［J］. 材料热处理学报, 2014, 35(Sup.): 154-158.
HAN Zhilei, HU Shubing, XIONG Xuesong, et al. Influence of punching process on microstructure near cutting edge and magnetic properties of non-oriented electrical steel［J］. Transactions of Materials and Heat Treatment, 2014, 35(Sup.): 154-158.
［5］WEISS H A, LEUNING N, STEENTJES S, et al. Influence of shear cutting parameters on the electromagnetic properties of non-oriented electrical steel sheets［J］. Journal of Magnetism and Magnetic Materials, 2017, 421: 250-259.
［6］HOLOPAINEN T P, RASILO P, ARKKIO A. Identification of magnetic properties for cutting edge of electrical steel sheets［J］. IEEE Transactions on Industry Applications, 2012, 53(2): 1049-1053.
［7］MAUREL V, OSSART B, BILLARDON R. Resi-dual stresses in punched laminations: Phenomenological analysis and influence on the magnetic behavior of electrical steels［J］. Journal of Applied Physics, 2003, 93(10): 7106-7108.
［8］CAO H, HAO L, YI J, et al. The influence of pun-ching process on residual stress and magnetic domain structure of non-oriented silicon steel［J］. Journal of Magnetism and Magnetic Materials, 2016, 406: 42-47.
［9］NAKATA T, NAKANO M, KAWAHARA K. Effects of stress due to cutting on magnetic characte-ristics of silicon steel［J］. IEEE Translation Journal on Magnetics in Japan, 1992, 7(6): 453-457.
［10］ZHU L N, XU B S, WANG H D, et al. Measurement of residual stress in quenched 1045 steel by the nanoindentation method［J］. Materials Characterization, 2010, 61(12): 1359-1362.
［11］王洪泽. 电工钢叠片激光焊接界面传热行为与磁性能劣化机理研究［D］. 上海: 上海交通大学, 2016.
WANG Hongze. Study on interfacial heat transfer in laser welding of laminated electrical steels and magnetic properties degradation［D］ Shanghai: Shanghai Jiao Tong University, 2016.
［12］郭钊, 唐文亭, 曹立勋. 圆管异形孔冲裁工艺设计及有限元模拟［J］. 锻压技术, 2014, 39(8): 140-145.
GUO Zhao, TANG Wenting, CAO Lixun. Process design and numerical simulation on shaped hole blanking of steel round pipe［J］. Forging & Stamping Technology, 2014, 39(8): 140-145.
［13］曹洪志, 郝林坡, 吴维, 等.模具间隙对无取向硅钢冲片质量的影响研究［J］. 锻压技术, 2016, 41(3): 94-98
CAO Hongzhi, HAO Linpo, WU Wei, et al. Research on influence of die clearance on the quality of non-oriented electrical steel parts［J］. Forging & Stamping Technology, 2016, 41(3): 94-98.
［14］HARSTICK H M S, RITTER M, RIEHEMANN W. Influence of punching and tool wear on the magnetic properties of nonoriented electrical steel［J］. IEEE Transactions of Magnetics, 2014, 50(4): 69-73.
［15］WANG H Z, ZHANG Y S, LI S H. Laser welding of laminated electrical steels［J］. Journal of Materials Processing Technology, 2016, 230: 99-108.
