Arterial Injury Assessment by Computational Interaction Model of Shear Thinning Blood with Expanded Stenotic Vascular

Expand
  • 1. School of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin 150080, China; 2. College of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, China

Online published: 2019-07-23

Abstract

The interaction of intravascular stent, stenotic artery and blood characterized with shear thinning is analyzed to investigate the induced arterial injury during implantation of a stent into a curved artery. Computational fluid-structure interaction model with S-type and N-type stents is presented to anticipate the plaque vulnerability based on three indices including the peak plaque stress, highest wall shear stress and wall equivalent stress, and the resultant arterial restenosis based on lowest wall shear stress. The numerical results show that the developed peak plaque stress, peak wall shear stress and peak wall equivalent stress for the N-type stent is less than the counterparts for the S-type stent, which suggest that the former takes a lower risk of plaque rupture than the latter. Compared with the S-type stent, the less areas with the lowest wall shear stress and more flow cross-section are observed in the expanded stenotic artery for the N-type stent, which suggests that the risk of arterial restenosis is lower for the N-type stent.

Cite this article

JIANG Xudong,LI Pengfei,LIU Zheng,TENG Xiaoyan . Arterial Injury Assessment by Computational Interaction Model of Shear Thinning Blood with Expanded Stenotic Vascular[J]. Journal of Shanghai Jiaotong University, 2019 , 53(6) : 757 -764 . DOI: 10.16183/j.cnki.jsjtu.2019.06.018

References

[1]ZUN P S, ANIKINA T, SVITENKOV A, et al. A comparison of fully-coupled 3D in-stent restenosis simulations to in-vivo data [J]. Frontiers in Physiology, 2017, 8(5): 1-12. [2]KARIMI A, NAVIDBAKHSH M, RAZAGHI R. A finite element study of balloon expandable stent for plaque and arterial vulnerability assessment [J]. Journal of Applied Physics, 2014, 116(4): 044701-044701-8. [3]QIAO A K, ZHANG Z Z. Numerical simulation of vertebral artery stenosis treated with different stents [J]. Journal of Biomechanical Engineering, 2014, 136(4): 1274-1283. [4]WEI L L, CHEN Q, LI Z Y. Study on the impact of straight stents on arteries with different curvatures [J]. Journal of Mechanics in Medicine and Biology, 2016, 16(7): 1650093-1-14. [5]EBRAHIM B, MAHDI H, ALIREZA K, et al. Numerical evaluation of stenosis location effects on hemodynamics and shear stress through curved artery [J]. Journal of Biomaterials and Tissue Engineering, 2014, 4(5): 358-366. [6]ALIREZA K, MAHDI N, RAZAGHI R, et al. A computational fluid-structure interaction model for plaque vulnerability assessment in atherosclerotic human coronary arteries [J]. Journal of Applied Physics, 2014, 115(14): 144702-144702-8. [7]KELLER B K, AMATRUDA C M, HOSE D R, et al. Contribution of mechanical and fluid stresses to the magnitude of in-stent restenosis at the level of individual stent struts [J]. Cardiovascular Engineering and Technology, 2014, 5 (2): 164-175. [8]POON E K W, BARLIS P, MOORE S, et al. Numerical investigations of the hemodynamic changes associated with stent malapposition in an idealised coronary artery [J]. Journal of Biomechanics, 2014, 47(12): 2843-2851. [9]SUSANN B, JOHN O, MARK W, et al. Hemo-dynamics in idealized stented coronary arteries: Important stent design considerations [J]. Annals of Biomedical Engineering, 2016, 44(2): 315-329. [10]ALBERTO G, JOO J, ALEXANDRA M, et al. Shear-thining effects of hemodynamics in patient-specific cerebral aneurysms [J]. Mathematical Biosciences and Engineering, 2013, 10(3): 649-655. [11]NADEEM S, IJAZ S. Theoretical analysis of shear thinning hyperbolic tangent fluid model for blood flow in curved artery with stenosis [J]. Journal of Applied Fluid Mechanics, 2016, 9(5): 2217-2227. [12]MARTIN D M, MURPHY E A, BOYLE F J. Computational fluid dynamics analysis of balloon-expandable coronary stents: Influence of stent and vessel deformation [J]. Medical Engineering & Physics, 2014, 36(8): 1047-1056. [13]CHIASTRA C, MIGLIAVACCA F, MARTNEZ M , et al. On the necessity of modelling fluid-structure interaction for stented coronary arteries [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2014, 34(6): 217-230. [14]CHEN H Y, KOO B K, KASSAB G S. Impact of bifurcation dual stenting on endothelial shear stress [J]. Journal of Applied Physiology, 2015, 119(6): 627-632. [15]MUHAMMAD F K, DAVID B, ASHCROFT I, et al. A novel approach to design lesion-specific stents for minimum recoil [J]. Journal of Medical Devices, 2016, 11(3): 011001-1-10. [16]LALLY C, REID A J, PRENDERGAST P J. Elastic behavior of porcine coronary artery tissue under uniaxial and equibiaxial tension [J]. Annals of Biomedi-cal Engineering, 2004, 32(10): 1355-1364. [17]MATTACE-RASO F U S, VAN DER CAMMEN T J M, HOFMA A, et al. Arterial stiffness and risk of coronary heart disease and stroke: The rotterdam study [J]. Circulation, 2006, 113(5): 657-663. [18]SEO T, SCHACHTER L G, BARAKAT A I. Computational study of fluid mechanical disturbance induced by endovascular stents [J]. Annals of Biomedical Engineering, 2005, 33(4): 444-456.
Outlines

/