The large time step static implicit finite element method (FEM) for sheet metal forming simulation is presented to alleviate the convergence problem of the traditional implicit incremental FEM, and the simulation process of sheet metal forming is divided into bending deformation and tensile deformation. According to constraints of positions between the blank and mold, the shape of bending deformation which is called intermediate configuration is calculated. Meanwhile, a method based on pre-stress membrane element for constructing an intermediate configuration is also proposed in this paper. In this method, the contact states of the blank nodes are determined by the contact algorithm. The contact zone of blank is determined by the shape of mold, the non-contact zone is calculated with iterations for equilibrium equations by the pre-stress membrane element. The result shows that the proposed algorithm could obtain the appropriate intermediate configurations quickly and provide precise surface sliding constraint for tensile deformation.
LIU Yongcai,BAO Yidong,QIN Xuejiao,LIU Yulin,CHEN Wenliang
. Constructions of Intermediate Configuration in Sheet Forming Simulation[J]. Journal of Shanghai Jiaotong University, 2019
, 53(6)
: 713
-718
.
DOI: 10.16183/j.cnki.jsjtu.2019.06.012
［1］ROBERT C, DELAMZIRE A, DAL S P, et al. Comparison between incremental deformation theory and flow rule to simulate sheet-metal forming processes［J］. Journal of Materials Processing Technology, 2012, 212(5): 1123-1131.
［2］GUO Y Q, BATOZ J L, NACEUR H. Recent deve-lopments on the analysis and optimum design of sheet metal forming parts using a simplified inverse approach［J］. Computers & Structures, 2000, 78(1/2/3): 133-148.
［3］ABLAT M A, QATTAWI A. Numerical simulation of sheet metal forming: A review［J］. International Journal of Advanced Manufacturing Technology, 2017, 89(1/2/3/4): 1235-1250.
［4］AHMED G M S, AHMED H, MOHIUDDIN M V, et al. Experimental evaluation of springback in mild steel and its validation using LS-DYNA［J］. Procedia Materials Science, 2014, 6: 1376-1385.
［5］KUBLIW, REISSNER J. Optimization of sheet-metal forming processes using the special purpose program AUTOFORM［J］. Journal of Materials Processing Technology, 1995, 50(1/2/3/4): 292-305.
［6］LEE C, CAO J. Shell element formulation of multi-step inverse analysis for axisymmetric deep drawing process［J］. International Journal for Numerical Me-thods in Engineering, 2015, 50(3): 681-706.
［7］GUO Y Q, LI Y, ABBS B, et al. Damage prediction in metal forming process modeling and optimization: Simplified approaches［M］. New York: Springer, 2015.
［8］刘伟杰, 胡平, 周平, 等. 板材多步逆成形中的滑移约束曲面优化构造方法［J］. 机械工程学报, 2012, 48(4): 21-25.
LIU Weijie, HU Ping, ZHOU Ping, et al. Research on intermediate configurations of multi-step inverse approach in sheet metal forming［J］. Journal of Mechanical Engineering, 2012, 48(4): 21-25.
［9］张向奎, 王峰, 刘伟杰, 等. 多步逆成形有限元法中间构形初始解预示算法［J］. 机械工程学报, 2015, 51(24): 118-125.
ZHANG Xiangkui, WANG Feng, LIU Weijie, et al. Solving algorithm of initial guess of intermediate configuration in multi-step inverse finite element［J］. Journal of Mechanical Engineering, 2015, 51 (24): 118-125.
［10］SHIRIN M B, ASSEMPOUR A. Some improvements on the unfolding inverse finite element method for simulation of deep drawing process［J］. The International Journal of Advanced Manufacturing Technology, 2014, 72(1/2/3/4): 447-456.
［11］陈伟, 那景新. 基于拟全量理论的多步正向成形模拟方法［J］. 工程力学, 2016, 33(10): 236-242.
CHEN Wei, NA Jingxin. The multi-step positive approach for sheet metal forming simulation based on the quasi-deformation theory［J］. Engineering Mechanics, 2016, 33(10): 236-242.
［12］郭彦林, 田广宇. 索结构体系、设计原理与施工控制［M］. 北京: 科学出版社, 2014: 224-229.
GUO Yanlin, TIAN Guangyu. Cable structure system, design principle and construction control［M］. Beijing: Science Press, 2014: 224-229.
