By the means of low temperature colossal supersaturation gaseous carburization (LTCSGC) technique, a carburizing layer of 30 μm was formed on the surface of 316L austenitic stainless steel bipolar plate. The carbon concentration, compressive residual stress, nano-hardness and the phase structure along cross-sectional depth direction of the specimens were investigated, respectively. Besides, the contact resistance of carburized 316L stainless steel bipolar plates was measured and the corrosion resistance of the samples in simulated proton exchange membrane fuel cell (PEMFC) environment was analyzed. Results demonstrate that the LTCSGC layer was a functionally gradient material which was composed of expanded austenite. Moreover, its carbon concentration, residual stress and hardness decline continuously along cross-sectional depth direction from surface to substrate. Compared with 316L stainless steel bipolar plates, the contact resistance of carburized samples after LTCSGC treatment was reduced by 34%. The self-corrosion potential in PEMFC anode environment was improved to -79mV, which was higher than the PEMFC work potential (-0.1V). Therefore, it was protected by cathode. In PEMFC simulated cathode environment, the self-corrosion potential was increased by 260mV and the corrosion resistance was remarkably improved. Meanwhile, the potentiostatic polarization etching current density was reduced by 75%.
JIANG Yong,LI Yang,ZHOU Yang,GONG Jianming
. Surface Modification of Austenitic Stainless Steel Bipolar Plates by
Low Temperature Colossal Supersaturation Gaseous Carburization[J]. Journal of Shanghai Jiaotong University, 2019
, 53(2)
: 247
-252
.
DOI: 10.16183/j.cnki.jsjtu.2019.02.017
［1］STEELE B C H, HEINZEL A. Materials for fuel-cell technologies［J］. Nature, 2001, 414: 345-352.
［2］ASRI N F, HUSAINI T, SULONG A B, et al. Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review［J］. International Journal of Hydrogen Energy, 2017, 42(14): 9135-9148.
［3］SILVA R F, POZIO A. Corrosion study on different types of metallic bipolar plates for polymer electrolyte membrane fuel cells［J］. Journal of Fuel Cell Science and Technology, 2007, 4(2): 116-122.
［4］AYERS K E, CAPUANO C, ANDERSON E B. Recent advances in cell cost and efficiency for PEM-based water electrolysis［C］//ECS Transactions. Boston, USA: ECS, 2012, 41(10): 15-22.
［5］LEE S H, KAKATI N, MAITI J, et al. Corrosion and electrical properties of CrN-and TiN-coated 316L stainless steel used as bipolar plates for polymer electrolyte membrane fuel cells［J］. Thin Solid Films, 2013, 529: 374-379.
［6］YANG G, MO J, KANG Z, et al. Additive manufactured bipolar plate for high-efficiency hydrogen production in proton exchange membrane electrolyzer cells［J］. International Journal of Hydrogen Energy, 2017, 42(21): 14734-14740.
［7］荣冬松, 姜勇, 巩建鸣. 奥氏体不锈钢低温超饱和渗碳实验及热动力学模拟研究［J］. 金属学报, 2015, 51(12): 1516-1522.
RONG Dongsong, JIANG Yong, GONG Jianming. Experimental research and thermodynamic simulation of low temperature colossal carburization of austenitic stainless steel［J］. Acta Metallurgica Sinica, 2015, 51(12): 1516-1522.
［8］TRIWIYANTO A, HUSAIN P, HARUMAN E, et al. Low temperature thermochemical treatments of austenitic stainless steel without impairing its corrosion resistance［EB/OL］.［2017-07-20］.http://www.doc88.com/p-274339490502.html.
［9］HOEFT D, LATELLA B A, SHORT K T. Residual stress and cracking in expanded austenite layers［J］. Journal of Physics: Condensed Matter, 2005, 17(23): 3547-3558.
［10］荣冬松, 巩建鸣, 姜勇, 等. 奥氏体金属低温超饱和气体渗碳表面强化试验装置: CN103323355A ［P］. 2013-09-05［2017-02-09］.
RONG Dongsong, GONG Jianming, JIANG Yong, et al. Test device for austenitic metal low temperature supersaturated gas carburizing surface strengthening: CN103323355A ［P］. 2013-09-05［2017-02-09］.
［11］周上祺. X射线衍射分析原理、方法、应用［M］. 重庆: 重庆大学出版社, 1991.
ZHOU Shangqi. X ray diffraction analysis principle, method and application ［M］. Chongqing: Chongqing University Press, 1991.
［12］AVASARALA B, HALDAR P. Effect of surface roughness of composite bipolar plates on the contact resistance of a proton exchange membrane fuel cell［J］. Journal of Power Sources, 2009, 188(1): 225-229.
［13］PENG Y W, GONG J M, JIANG Y, et al. The effect of plastic pre-strain on low-temperature surface carburization of AISI 304 austenitic stainless steel［J］. Surface and Coatings Technology, 2016, 304: 16-22.
［14］DAVIES D P, ADCOCK P L, TURPIN M, et al. Bipolar plate materials for solid polymer fuel cells［J］. Journal of Applied Electrochemistry, 2000, 30(1): 101-105.
［15］HEUER A H, KAHN H, NATISHAN P M, et al. Electrostrictive stresses and breakdown of thin passive films on stainless steel［J］. Electrochimica Acta, 2011, 58: 157-160.
［16］HEUER A H, KAHN H, ERNST F, et al. Enhanced corrosion resistance of interstitially hardened stainless steel: Implications of a critical passive layer thickness for breakdown［J］. Acta Materialia, 2012, 60(2): 716-725.
