A fluid-structure coupled method for the dynamic response of the elastic wedge during the water entry is established based on a semi-analytical slamming model. By comparing the calculation results with different mesh densities, time steps and mode numbers, it is shown that the proposed method has better convergence. The correctness of the method is verified by comparing it with the results of commercial software and literature. Compared with the hydroelastic analysis method based on the Wagner model, this method can reasonably predict the structural response before and after flow separation. The structural responses by the coupling method and decoupling method under different impact velocities are compared and analyzed, and the importance of fluid-structure interaction is further revealed.
YU Pengyao,ZHAO Yong,WANG Tianlin,ZHEN Chunbo,SU Shaojuan
. Water Entry of an Elastic Wedge Based on
a Semi-Analytical Slamming Model[J]. Journal of Shanghai Jiaotong University, 2019
, 53(2)
: 179
-187
.
DOI: 10.16183/j.cnki.jsjtu.2019.02.008
［1］FALTINSEN O M. Water entry of a wedge by hydroelastic orthotropic plate theory ［J］. Journal of Ship Research, 1999, 43: 180-193.
［2］WAGNER H. Uber stoss-und gleitvorgange an der ober-flache von flussigkeite ［J］. Zeitschrift fur Angewandte Mathematik und Mechanik, 1932, 12(4): 193-215.
［3］KHABAKHPASHEVA T I, KOROBKIN A A. Elastic wedge impact onto a liquid surface: Wagner’s solution and approximate models ［J］. Journal of Fluids and Structures, 2013, 36: 32-49.
［4］SHAMS A, PORFIRI M. Treatment of hydroelastic impact of flexible wedges ［J］. Journal of Fluids and Structures, 2015, 57: 229-246.
［5］DATTA N, SIDDIQUI M A. Hydroelastic analysis of axially loaded Timoshenko beams with intermediate end fixities under hydrodynamic slamming loads ［J］. Ocean Engineering, 2016, 127: 124-134.
［6］陈震, 肖熙. 二维楔形体入水砰击仿真研究 ［J］. 上海交通大学学报, 2007, 41(9): 1425-1428.
CHEN Zhen, XIAO Xi. The simulation study on water entry of 2D wedge bodies［J］. Journal of Shanghai Jiao Tong University, 2007, 41(9): 1425-1428.
［7］STENIUS I, ROSEN A, KUTTENKEULER J. Hydroelastic interaction in panel-water impacts of high-speed craft ［J］. Ocean Engineering, 2011, 38(2): 371-381.
［8］曹正林, 吴卫国. 影响高速三体船连接桥砰击压力峰值因素研究 ［J］. 武汉理工大学学报(交通科学与工程版), 2008, 32(1): 5-8.
CAO Zhenglin, WU Weiguo. Research on factors affecting the slamming pressure peak value of trimaran cross structure ［J］. Journal of Wuhan University of Technology (Transportation Science & Engineering), 2008, 32(1): 5-8.
［9］PIRO D J, MAKI K J. Hydroelastic analysis of bodies that enter and exit water ［J］. Journal of Fluids and Structures, 2013, 37: 134-150.
［10］莫立新, 王辉, 蒋彩霞, 等. 变刚度楔形体板架落体砰击试验研究 ［J］. 船舶力学, 2011, 15(4): 394-401.
MO Lixin, WANG Hui, JIANG Caixia, et al. Study on dropping test of wedge grillages with various types of stiffeness ［J］. Journal of Ship Mechanics, 2011, 15(4): 394-401.
［11］王文华, 黄一, 王言英, 等. 弹性楔形体各状态参数对入水运动性能的影响 ［J］. 船舶力学, 2014, 18(11): 1320-1330.
WANG Wenhua, HUANG Yi, WANG Yanying, et al. Effect of status parameters for elastic wedge on dynamic performance of water-entry ［J］. Journal of Ship Mechanics, 2014, 18(11): 1320-1330.
［12］KOROBKIN A. Analytical models of water impact ［J］. European Journal of Applied Mathematics, 2004, 15(6): 821-838.
［13］TASSIN A, KOROBKIN A A, COOKER M J. On analytical models of vertical water entry of a symme-tric body with separation and cavity initiation ［J］. Applied Ocean Research, 2014, 48: 33-41.
［14］YU Pengyao, REN Huilong, LI Hui, et al. Slamming study of wedge and bow-flared sections ［J］. Journal of Ship Mechanics, 2016, 20(9): 1109-1120.
［15］段文洋, 朱鑫, 倪阳, 等.考虑流动分离的有限宽楔形剖面匀速入水受力分析 ［J］. 船舶力学, 2013, 17(8): 911-919.
DUAN Wenyang, ZHU Xin, NI Yang, et al. Constant velocity water entry of finite wedge section with flow separation ［J］. Journal of Ship Mechanics, 2013, 17(8): 911-919.
［16］ZHAO R, FALTINSEN O. Water entry of two-dimensional bodies ［J］. Journal of Fluid Mechanics, 1993, 246: 593-612.
