By analyzing the relationship among structural collision damage, collision energy transformation and collision force of ship structure, the critical collision velocity was defined as an crashworthiness index, and the crashworthiness optimization formulation was established. The fishing vessels-vessels collision was taken as an example, numerical calculation of ship right collision was carried out. The influences of striking velocity on the collision characteristic such as deformation, energy transformation and collision force of the broadside structure of the struck ship were compared, the critical velocity of struck ship structure was determined, aiming at improving the critical collision speed of struck ship structure a proposal was given. The results of numerical calculation show that it is feasible to evaluate the crashworthiness index based on the safety critical velocity.
CHEN Luyun,LI Leixin
. Optimization of Ship Structure for the Crashworthiness
Based on Critical Velocity[J]. Journal of Shanghai Jiaotong University, 2018
, 52(6)
: 643
-649
.
DOI: 10.16183/j.cnki.jsjtu.2018.06.003
［1］冯清海, 吴宏波.基于能量的船桥碰撞力计算方法［J］.武汉理工大学学报(交通科学与工程版), 2013，37(5): 943-946.
FENG Qinghai, WU Hongbo. Method for ship-bridge collision force calculation based on energy［J］. Journal of Wuhan University of Technology (Transportation Science & Engineering), 2013，37(5): 943-946.
［2］刘元丹, 刘敬喜, 肖曙明, 等.双壳船内壳和外壳结构耐撞性能的分析和比较［J］.中国造船, 2012, 53(3): 122-128.
LIU Yuandan, LIU Jingxi, XIAO Shuming, et al. Comparison of crashworthiness of inside shell with that of outside one for double-hull structures［J］. Shipbuilding of China, 2012, 53(3): 122-128.
［3］WANG L L, YANG L M, HUANG D J, et al. An impact dynamics analysis on a new crashworthy device against ship-bridge collision［J］. International Journal of Impact Engineering, 2008, 35(8): 895-904.
［4］SUN B, HU Z Q, WANG G. An analytical method for predicting the ship side structure response in raked bow collisions［J］. Marine Structures, 2015, 41(1): 288-311.
［5］YAGI S, KUMAMOTO H, MURAGISHI O, et al. A study on collision buffer characteristic of sharp entrance angle bow structure［J］. Marine Structures, 2009, 22(1): 12-23.
［6］刘昆, 王自力, 张延昌, 等.基于全耦合技术的船体结构碰撞性能研究［J］.船舶力学, 2015, 19(5): 574-581.
LIU Kun, WANG Zili, ZHANG Yanchang, et al. Collision behavior of structural analysis in ship collisions based on full-coupling technology［J］. Journal of Ship Mechanics, 2015, 19(5): 574-581.
［7］姜兴家, 张鹏, 吴文锋.撞击位置和初速度对被撞船舶舷侧结构的影响［J］.中国航海, 2012, 35(2): 76-81.
JIANG Xingjia, ZHANG Peng, WU Wenfeng. Effect of impact position and initial velocity on side structure of collided ship［J］. Navigation of China, 2012, 35(2): 76-81.
［8］胡志强, 崔维成.船舶碰撞机理与耐撞性结构设计研究综述［J］.船舶力学, 2005, 9(2): 131-142.
HU Zhiqiang, CUI Weicheng. Review of the researches on the ship collision mechanisms and the structural designs against collision［J］. Journal of Ship Mechanics, 2005, 9(2): 131-142.
［9］李俊来, 谢永和, 陈景昊, 等.基于低速碰撞下的三用工作船船体结构响应分析［J］. 武汉理工大学学报(交通科学与工程版), 2014, 38(2): 329-337.
LI Junlai, XIE Yonghe, CHEN Jinghao, et al. Hull structure response analysis of the anchor handling towing ship based on the low-speed collision［J］. Journal of Wuhan University of Technology (Transportation Science & Engineering), 2014, 38(2): 329-337.
［10］PAN F, ZHU P, CHEN W, et al. Application of conservative surrogate to reliability based vehicle design for crashworthiness［J］. Journal of Shanghai Jiao Tong University, 2013, 18(2): 159-165.
［11］HOU S J, LI Q, LONG S Y, et al. Multiobjective optimization of multi-cell sections for the crashworthiness design［J］. International Journal of Impact Engineering, 2008, 35(11): 1355-1367.
［12］陈炉云, 侯国华, 张裕芳.小型快艇结构耐撞性研究［J］.中国舰船研究, 2012, 7(5): 27-32.
CHEN Luyun, HOU Guohua, ZHANG Yufang. Structural crashworthiness analysis of fast boat［J］. Chinese Journal of Ship Research, 2012, 7(5): 27-32.
［13］MOTORA S, FUJINO M, SUGIURA M, et al. Equivalent added mass of ships in collisions［J］. Journal of Colloid & Interface Science, 1971, 207(2): 309-316.
