WANG Jun1，LIU Ying1,2 . Corrosion Resistance and Hemocompatibility of Passivated 316L Stainless Steel[J]. Journal of Shanghai Jiaotong University, 2018 , 52(5) : 593 -598 . DOI: 10.16183/j.cnki.jsjtu.2018.05.014

［1］POURHASHEM S, AFSHAR A. Double layer bioglass-silica coatings on 316L stainless steel by sol-gel method［J］. Ceramics International, 2014, 40(1): 993-1000. ［2］TALHA M, KUMAR S, BEHERA C K, et al. Effect of cold working on biocompatibility of Ni-free high nitrogen austenitic stainless steels using Dalton’s Lymphoma cell line［J］. Materials Science and Engineering C: Materials for Biological Applications, 2014, 35(10): 77-84. ［3］KIM M S, DEAN L S. In-stent restenosis［J］. Cardiovascular Therapeutics, 2011, 29(3): 190-198. ［4］SIMSEK Z, KOZA Y, TAS M H, et al. Two cases of very late bare-metal stent thrombosis and literature review［J］. European Review for Medical and Pharmacological Sciences, 2014, 18(11): 1674-1677. ［5］CHEN Q, THOUAS G A. Metallic implant biomaterials［J］. Materials Science and Engineering R: Reports, 2015, 87(1): 1-57. ［6］KOPPARA T, SAKAKURA K, PACHECO E, et al. Preclinical evaluation of a novel polyphosphazene surface modified stent［J］. International Journal of Cardiology, 2016, 222: 217-225. ［7］FU T, WEN C S, LU J, et al. Sol-gel derived TiO2 coating on plasma nitrided 316L stainless steel［J］. Vacuum, 2012, 86(9): 1402-1407. ［8］HUANG Q, YANG Y, HU R, et al. Reduced platelet adhesion and improved corrosion resistance of superhydrophobic TiO2-nanotube-coated 316L stainless steel［J］. Colloids and Surfaces B: Biointerfaces, 2015, 125: 134-141. ［9］MOHAN C C, CHERIAN A M, KURUP S, et al. Stable titania nanostructures on stainless steel coronary stent surface for enhanced corrosion resistance and endothelialization［J］. Advanced Healthcare Materials, 2017, 6(11): 1601353. ［10］刘莹, 刘小龙, 王军, 等. 溶胶-凝胶法制备ZrO2薄膜及其耐腐蚀性与血液相容性研究［J］. 功能材料, 2014, 45(14): 14061-14065. LIU Ying, LIU Xiaolong, WANG Jun, et al. Corrosion resistance and hemocompatibility of zirconium oxide thin films prepared by sol-gel dip coating method［J］. Journal of Functional Materials, 2014, 45(14): 14061-14065. ［11］马春阳, 朱永永, 吴飞飞, 等. 316L不锈钢支架表面EVAL涂层的制备及性能研究［J］. 功能材料, 2014, 45(13): 13056-13058. MA Chunyang, ZHU Yongyong, WU Feifei, et al. Preparation and performance of ethylene-vinyl alcohol copolymer coatings on 316L stainless steel stent［J］. Journal of Functional Materials, 2014, 45(13): 13056-13058. ［12］MUTHUKUMARAN V, SELLADURAI V, NANDHAKUMAR S, et al. Experimental investigation on corrosion and hardness of ion implanted AISI 316L stainless steel［J］. Material Design, 2010, 31(6): 2813-2817. ［13］GAO L, ZHOU W, WANG Y, et al. Fabrication of hydrophobic structures on stent by direct three-beam laser interference lithography［J］. Optik-International Journal for Light and Electron Optics, 2016, 127(13): 5211-5214. ［14］SHIH C C, SHIH C M, CHOU K Y. Stability of passivated 316L stainless steel oxide films for cardiovascular stents［J］. Journal of Biomedical Materials Research Part A, 2007, 80(4): 861-873. ［15］BEIJK M A M, KLOMP M, VEROUDEN N J W, et al. GenousTM endothelial progenitor cell capturing stent vs. the Taxus Liberté stent in patients with de novo coronary lesions with a high-risk of coronary restenosis: A randomized, single-center, pilot study［J］. European Heart Journal, 2010, 31(9): 1055-1064. ［16］HUANF N, YANG P, LENG Y X, et al. Hemocompatibility of titanium oxide films［J］. Biomaterials, 2003, 24(13): 2177-2187. ［17］DING M H, WANG B L, LI L, et al. Preparation and characterization of TaCxN1-x coatings on biome-dical 316L stainless steel［J］. Surface and Coatings Technology, 2010, 204 (16/17): 2519-2526. ［18］WANG L, ZHAO X, DING M H, et al. Surface modification of biomedical AISI 316L stainless steel with zirconium carbonitride coatings［J］. Applied Surface Science, 2015, 340: 113-119.