A high frequency film actuator for the micropump is proposed based on the bridge-type mechanism. The bridge-type mechanism contributes to the improvement in the amplification ratio, and the linkage mechanism is employed to eliminate the output drift. The ideal model and the elastic theory are respectively used to establish the kinematic characteristics and the deformation of the film actuator in order to investigate the displacement amplification ratio and the output drift. It is possible for the rotational symmetric configuration to reduce the thermal deformations. By the finite element analysis in ANSYS software and prototype experiments the mechanical design and the displacement amplification ratio are evaluated. The prototype was made by MEMS technology, and had the maximum output displacement of 50 μm and the displacement amplification ratio of 23. If the geometric relation agrees with the developed conditions, the output displacement is only relative to the mean of the input displacements, and no output radial displacement exists because of the difference among the inputs.
LIU Jihao,YAN Weixin,LI Peixing,PAN Gen,ZHAO Yanzheng
. Design of the Film Actuator Based on Bridge-Type Mechanism[J]. Journal of Shanghai Jiaotong University, 2018
, 52(4)
: 429
-436
.
DOI: 10.16183/j.cnki.jsjtu.2018.04.007
［1］CAZORLA P H, FUCHS O, COCHET M, et al. A low voltage silicon micro-pump based on piezoelectric thin films［J］. Sensors and Actuators A: Physical, 2016, 250: 35-39.
［2］TANDON V, KANG W S, ROBBINS T A, et al. Microfabricated reciprocating micropump for intra-cochlear drug delivery with integrated drug/fluid sto-rage and electronically controlled dosing［J］. Lab on a Chip, 2016, 16(5): 829-846.
［3］COBO A, SHEYBANI R, TU H, et al. A wireless implantable micropump for chronic drug infusion against cancer［J］. Sensors and Actuators A: Physical, 2016, 239: 18-25.
［4］LINTEL H T G, POL F C M, BOUWSTRA S. A piezoelectric micropump based on micromachining of silicon［J］. Sensors and Actuators, 1988, 15(2): 153-167.
［5］GRZEBYK T P, GRECKA-DRZAZGA A, DZIUBAN J A, et al. Micropump for generation and control of vacuum inside miniature devices［J］. Journal of Microelectromechanical Systems, 2014, 23(1): 50-55.
［6］ZHANG Z, KAN J, CHENG G, et al. A piezoelectric micropump with an integrated sensor based on space-division multiplexing［J］. Sensors and Actuators A: Physical, 2013, 203: 29-36.
［7］CONDE A J, BIANCHETTI A, VEIRAS F E, et al. A polymer chip-integrable piezoelectric micropump with low backpressure dependence［J］. RSC Advances, 2015, 5(62): 49996-50000.
［8］ZHANG W, EITEL R E. An integrated multilayer ceramic piezoelectric micropump for microfluidic systems［J］. Journal of Intelligent Material Systems and Structures, 2013, 24(13): 1637-1646.
［9］WANG X Y, MA Y T, YAN G Y, et al. A compact and high flow-rate piezoelectric micropump with a folded vibrator［J］. Smart Materials and Structures, 2014, 23(11): 115005.
［10］XU Y N, XIANG C C. Piezoceramic stack actuators for micropositioning stage［J］.Key Engineering Materials, 2012, 512: 1337-1341.
［11］QIN Y, SHIRINZADEH B, ZHANG D, et al. Design and kinematics modeling of a novel 3-DOF monolithic manipulator featuring improved Scott-Russell mechanisms［J］. Journal of Mechanical Design, 2013, 135(10): 101004.
［12］QI K, XIANG Y, FANG C, et al. Analysis of the displacement amplification ratio of bridge-type mechanism［J］. Mechanism and Machine Theory, 2015, 87: 45-56.
［13］BHAGAT U, SHIRINZADEH B, CLARK L, et al. Design and analysis of a novel flexure-based 3-DOF mechanism［J］. Mechanism and Machine Theory, 2014, 74: 173-187.
［14］曲兴田, 董景石, 郭俊臣, 等. 基于柔性铰链放大的压电叠堆泵［J］. 吉林大学学报: 工学版, 2008, 38(3): 552-556.
QU Xingtian, DONG Jingshi, GUO Junchen, et al. Piezoelectric stack pump based on flexure hinge magnification［J］. Journal of Jilin University (Engineering and Technology Edition), 2008, 38(3): 552-556.
［15］LOBONTIU N, GARCIA E. Analytical model of displacement amplification and stiffness optimization for a class of flexure-based compliant mechanisms［J］. Computers & Structures, 2003, 81(32): 2797-2810.
