Model Selection Study on Motion Prediction Methods of IMO’s Parametric Rolling Level 2 Criteria

Expand
  • Shanghai Rules & Research Institute, China Classification Society, Shanghai 200135, China

Online published: 2018-03-28

Abstract

The International Maritime Organization (IMO) lunched a new round of model selection for motion prediction method of the Level 2 parametric rolling (PR) criteria in 2016. The model selection study on prediction method is very important for developing reasonable dynamic stability criteria and increasing the safety level of ship. According to test data, three alternative nonlinear dynamics methods are verified, validated and compared, including time-domain method and averaging method, and the reasons for difference of prediction precision have been analyzed. On this basis, vulnerability levels for large scale sample calculations and accident ship have been obtained and compared, and several suggestions about model selection for motion prediction method of the Level 2 PR criteria have also been given. The accuracy validation and comparison study are executed firstly for the motion prediction methods of Level 2 criteria of PR in this study, and parameters setting of time-domain method are also provided. This is helpful to the development of second generation stability criteria.

Cite this article

ZHOU Yaohua,ZHANG Gaofeng . Model Selection Study on Motion Prediction Methods of IMO’s Parametric Rolling Level 2 Criteria[J]. Journal of Shanghai Jiaotong University, 2018 , 52(3) : 283 -290 . DOI: 10.16183/j.cnki.jsjtu.2018.03.005

References

[1]China. Comments on Level 2 criteria of parametric rolling (SDC 2/5/1)[C]∥Ship Design and Construction 2nd Session. London: International Maritime Organization, 2014: 1-4. [2]Japan. Information collected by the correspondence group on intact stability regarding the second generation intact stability criteria development (INF8)[C]∥Ship Design and Construction (SDC) 1st Session. London: International Maritime Organization, 2014: 1-130. [3]周耀华, 张高峰, 马宁. 基于IMO 二代稳性衡准的实船参数横摇敏感性及衡准完善[J]. 上海交通大学学报, 2016, 50(3): 425-436. ZHOU Yaohua, ZHANG Gaofeng, MA Ning. Vulnerability check and further development of parametric roll criteria of 2nd generation intact stabi-lity code of IMO based on full scale ship data[J]. Journal of Shanghai Jiao Tong University, 2016, 50(3): 425-436. [4]马坤, 王婷, 徐光龙. 船舶参数横摇薄弱性衡准样船计算分析[J]. 中国造船, 2015, 56(增刊1): 15-21. MA Kun, WANG Ting, XU Guanglong. Calculation and analysis of vulnerability criteria in parametric rolling for sample ships[J]. Shipbuilding of China, 2015, 56 (Sup 1): 15-21. [5]IMO. Finalization of second generation intact stability criteria—Report of the working group (Part 1) (WP.5/Annex 4)[C]∥Ship Design and Construction (SDC) 3rd Session. London: International Maritime Organization, 2016: 1-34. [6]FRANCESCUTTO A. An experimental investigation of parametric rolling in head waves[J]. Journal of Offshore Mechanics and Arctic Engineering, 2011, 123(2): 65-69. [7]LU J, UMEDA J, MA K. Predicting parametric rolling in irregular head seas with added resistance taken into account[J]. Journal of Marine Science and Technology, 2011, 16(4): 462-471. [8]ZHOU Y H, MA N, LU J, et al. A study on hybrid prediction method for ship parametric rolling[J]. Journal of Hydrodynamics, 2016, 28(4): 617-628.
Options
Outlines

/